ແນະນຳ
This manual provides comprehensive instructions for the Elekpia Universal Remote Control, model CT-RC1US-18. This remote is designed for seamless compatibility with a wide range of Toshiba LED LCD HDTV models, including but not limited to CT-90325, CT-90326, CT-90329, CT-8037, CT-90302, CT-90275, CT-90, CT-90366, and CT-RC1US-18. Please read this manual carefully to ensure proper setup and operation of your new remote control.
ຕັ້ງຄ່າ
ການຕິດຕັ້ງຫມໍ້ໄຟ
The Elekpia Universal Remote Control requires two (2) 1.5V AA batteries for operation. No programming is needed; simply install the batteries, and the remote will be ready to use with your compatible Toshiba TV.
- ຊອກຫາຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງຣີໂໝດຄວບຄຸມ.
- ກົດລົງໃສ່ແຖບ ແລະເລື່ອນຝາປິດລົງລຸ່ມເພື່ອເປີດຊ່ອງໃສ່.
- ໃສ່ໝໍ້ໄຟ AA ສອງ (2) ໜ່ວຍ, ຮັບປະກັນຈຸດບວກ (+) ແລະ ລົບ (-) ສອດຄ່ອງຢ່າງຖືກຕ້ອງກັບເຄື່ອງໝາຍພາຍໃນຊ່ອງ.
- ເລື່ອນຝາປິດຊ່ອງໃສ່ໝໍ້ໄຟຄືນໃສ່ບ່ອນເກົ່າຈົນກວ່າມັນຈະກົດຢ່າງປອດໄພ.
ຮູບ 1: ດ້ານຫນ້າແລະດ້ານຫລັງ view of the Elekpia Universal Remote Control, highlighting the battery compartment on the rear.
Once batteries are installed, the remote is ready for immediate use with your Toshiba TV. No additional setup or code entry is required.
ຄໍາແນະນໍາການດໍາເນີນງານ
This universal remote control is designed to replicate the functions of your original Toshiba TV remote. Point the remote directly at your television's infrared receiver for optimal performance.
ຮູບ 2: ດ້ານຫນ້າ view of the Elekpia Universal Remote Control, displaying the layout of all buttons.
ຟັງຊັນປຸ່ມ
- ພະລັງງານ (⏻): ເປີດ ຫຼື ປິດໂທລະທັດ.
- ປ້ອນຂໍ້ມູນ: Cycles through available input sources (HDMI 1, HDMI 2, AV, etc.).
- ນອນ: Activates or adjusts the TV's sleep timer function.
- ແຊ່ແຂງ: Pauses the current image on the screen (functionality may vary by TV model).
- ຮູບແບບຮູບ: Adjusts picture modes (e.g., Standard, Movie, Dynamic).
- PIC SIZE: Changes the aspect ratio or picture size.
- ແຜ່ນຕົວເລກ (0-9): ປ້ອນຕົວເລກຊ່ອງໂດຍກົງ.
- - (Dash): Used for entering sub-channels (e.g., 7-1).
- FAV: ເຂົ້າເຖິງລາຍຊື່ຊ່ອງທີ່ມັກ.
- VOL (+/-): Increases or decreases the volume level.
- ປິດສຽງ: Silences the television audio.
- SAP: Selects Secondary Audio Program (SAP) or alternate audio tracks.
- ACC: Accesses accessibility features or audio settings.
- CH (ຂຶ້ນ/ລົງ): Changes the television channel up or down.
- ເອີ້ນຄືນ: Switches between the current and previously viewຊ່ອງ ed.
- Navigation Pad (Up, Down, Left, Right, ENTER): Navigates through on-screen menus and confirms selections.
- ເມນູ: Opens the main menu of the television.
- ອອກ: Closes the current menu or returns to the previous screen.
- ກັບຄືນ: ກັບໄປທີ່ເມນູ ຫຼື ໜ້າຈໍກ່ອນໜ້າ.
- ຂໍ້ມູນ: ສະແດງຂໍ້ມູນກ່ຽວກັບໂປຣແກມ ຫຼື ການປ້ອນຂໍ້ມູນປະຈຸບັນ.
- CH RTN (Channel Return): Similar to RECALL, returns to the previous channel.
- C.CAPTION (Closed Caption): ເປີດ ຫຼື ປິດຄຳບັນຍາຍ.
- REW (Rewind), PLAY, STOP, FF (Fast Forward): Controls for media playback (e.g., when using a connected USB device or smart TV apps, if supported by the TV).
ບໍາລຸງຮັກສາ
ທໍາຄວາມສະອາດໄລຍະໄກ
ເພື່ອຮັກສາຮູບລັກສະນະ ແລະ ໜ້າທີ່ການເຮັດວຽກຂອງຣີໂໝດຄວບຄຸມ, ໃຫ້ທຳຄວາມສະອາດມັນເປັນປະຈຳ:
- ໃຊ້ຜ້າອ່ອນໆແຫ້ງເຊັດໜ້າຜິວຂອງຣີໂໝດ.
- ສໍາລັບຝຸ່ນ stubborn, ເລັກນ້ອຍ dampໃສ່ຜ້າດ້ວຍນ້ໍາຫຼືຢາເຮັດຄວາມສະອາດອ່ອນໆ, ບໍ່ມີສານຂັດ. ຫຼີກເວັ້ນຄວາມຊຸ່ມຊື່ນຫຼາຍເກີນໄປ.
- ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງ, ຕົວລະລາຍ ຫຼື ຜ້າເຊັດທຳຄວາມສະອາດທີ່ມີສານຂັດ, ເພາະວ່າສິ່ງເຫຼົ່ານີ້ສາມາດທຳລາຍໜ້າຜິວ ຫຼື ອົງປະກອບພາຍໃນຂອງຣີໂໝດໄດ້.
ການປ່ຽນແບັດ
Replace batteries when the remote's response becomes sluggish or stops working. Always replace both AA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries, as this can lead to leakage or damage.
ການເກັບຮັກສາ
If the remote control will not be used for an extended period, remove the batteries to prevent potential leakage and damage to the device.
ການແກ້ໄຂບັນຫາ
If you encounter issues with your Elekpia Universal Remote Control, please refer to the following common solutions:
- ໄລຍະໄກບໍ່ຕອບສະໜອງ:
- ໃຫ້ແນ່ໃຈວ່າແບັດເຕີຣີຖືກຕິດຕັ້ງຢ່າງຖືກຕ້ອງດ້ວຍຂົ້ວທີ່ເໝາະສົມ (+/-).
- ປ່ຽນແບັດເຕີລີ່ AA ສົດ.
- ກວດເບິ່ງສິ່ງກີດຂວາງລະຫວ່າງການຄວບຄຸມໄລຍະໄກ ແລະເຊັນເຊີອິນຟາເຣດຂອງໂທລະພາບ.
- Ensure you are pointing the remote directly at the TV.
- ບາງປຸ່ມບໍ່ເຮັດວຽກ:
- This remote is pre-programmed for Toshiba TVs. Verify your TV model is compatible.
- Clean the remote's surface, especially around the unresponsive buttons, to remove any dirt or debris that might be interfering with button presses.
- ໂທລະທັດບໍ່ເປີດ/ປິດ:
- Confirm the TV is plugged into a working power outlet.
- Try using the power button directly on the TV to confirm it is operational.
If these steps do not resolve the issue, please refer to the customer support section.
ຂໍ້ມູນຈໍາເພາະ
| ໝາຍເລກຕົວແບບ | CT-RC1US-18 |
| ຍີ່ຫໍ້ | ເອເລັກເປຍ |
| ຂະໜາດສິນຄ້າ | 7 x 2 x 0.6 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 3 ອອນ |
| ແຫຼ່ງພະລັງງານ | 2 x 1.5V AA ຫມໍ້ໄຟ (ບໍ່ລວມ) |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | Toshiba LED LCD HDTVs |
| ຈຳນວນສູງສຸດຂອງອຸປະກອນທີ່ຮອງຮັບ | 1 |
| ສີ | ດຳ |
ຂໍ້ມູນການຮັບປະກັນ
Specific warranty details for the Elekpia Universal Remote Control CT-RC1US-18 are not provided in this manual. Please refer to the product packaging, the retailer's return policy, or the manufacturer's official webເວັບໄຊທ໌ສຳລັບຂໍ້ມູນກ່ຽວກັບການຄຸ້ມຄອງ ແລະ ເງື່ອນໄຂການຮັບປະກັນ.
ການຊ່ວຍເຫຼືອລູກຄ້າ
For further assistance or inquiries regarding your Elekpia Universal Remote Control, please contact the retailer from whom you purchased the product. You may also visit the official Elekpia website for potential support resources or contact information.
