Rigol MSO5074 Digital/Mixed Signal Oscilloscope User Manual

1. ບົດແນະນຳ

The Rigol MSO5074 is a high-performance four-channel digital/mixed signal oscilloscope designed for precise signal analysis and measurement. It features a 70 MHz bandwidth, an impressive real-time sample rate of up to 8 GSa/s, and a deep memory depth of 100 Mpts, expandable to 200 Mpts. This instrument is equipped with 16 digital channels (requiring an optional PLA2216 logic probe) and boasts a high waveform capture rate exceeding 500,000 waveforms per second, making it suitable for capturing transient events and analyzing complex signals.

ຮູບ 1.1: ດ້ານຫນ້າ view of the Rigol MSO5074 Digital/Mixed Signal Oscilloscope, showing the large display, control panel, and input channels.

2. ການຕິດຕັ້ງເບື້ອງຕົ້ນ

2.1 ການຫຸ້ມຫໍ່ແລະການກວດກາ

Upon receiving your MSO5074 oscilloscope, carefully unpack all components and inspect them for any signs of damage during transit. Retain the original packaging for future transport or storage.

• ກວດສອບວ່າອຸປະກອນເສີມທັງໝົດທີ່ລະບຸໄວ້ໃນລາຍການຫຸ້ມຫໍ່ແມ່ນມີຢູ່ແລ້ວ.
• Inspect the instrument for any physical damage, such as dents, scratches, or broken connectors.
• If any damage or missing items are found, contact your supplier immediately.

2.2 ການເຊື່ອມຕໍ່ພະລັງງານ

Connect the provided AC power cord to the power input on the rear panel of the oscilloscope. Ensure the power source matches the voltage requirements specified on the instrument's label. The MSO5074 operates on AC power.

ຮູບ 2.1: ດ້ານຫລັງ view of the MSO5074, highlighting the power input, HDMI, LAN, and USB ports.

2.3 ການເຊື່ອມຕໍ່ Probe

Connect the oscilloscope probes to the BNC input connectors on the front panel. Each channel (CH1, CH2, CH3, CH4) has a dedicated BNC input. For mixed-signal analysis, the 16 digital channels require the optional PLA2216 logic probe to be connected to the dedicated digital input port.

ຮູບທີ 2.2: ດ້ານຊ້າຍ view of the MSO5074.

ຮູບທີ 2.3: ດ້ານຂວາ view of the MSO5074.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

3.1 ການເປີດ/ປິດ

To power on the oscilloscope, press the power button located on the front panel. To power off, press and hold the power button until the unit shuts down.

3.2 ການໂຕ້ຕອບຜູ້ໃຊ້ຫຼາຍກວ່າview

The MSO5074 features a large touchscreen display for intuitive control, complemented by traditional physical knobs and buttons for precise adjustments. The interface allows for quick navigation through menus and settings.

3.3 ຟັງຊັນຫຼັກ

• Sampອັດຕາ le: Up to 8 GSa/s real-time sample rate ensures high-fidelity signal capture.
• ຄວາມເລິກຂອງໜ່ວຍຄວາມຈຳ: 100 Mpts standard, with an option to expand to 200 Mpts, allowing for longer capture times at high sampອັດຕາດອກເບ້ຍ.
• Waveform Capture Rate: Over 500,000 waveforms per second, increasing the probability of capturing infrequent events.
• Digital Channels: 16 integrated digital channels for mixed-signal analysis (requires optional PLA2216 logic probe).

3.4 Signal Acquisition and Analysis

To acquire a signal, connect your probe to the desired test point and the corresponding channel input on the oscilloscope. Adjust the vertical scale (Volts/Div) and horizontal scale (Sec/Div) to properly display the waveform. Use the trigger settings to stabilize the waveform on the screen. The oscilloscope offers various measurement and analysis functions, including automatic measurements, FFT analysis, and protocol decoding.

4. ການບໍາລຸງຮັກສາແລະການດູແລ

4.1 ການທໍາຄວາມສະອາດ

To maintain the performance and appearance of your oscilloscope, regularly clean its exterior. Use a soft, damp cloth with a mild detergent. Avoid abrasive cleaners or solvents that could damage the plastic components or screen. Ensure the instrument is powered off and disconnected from the power source before cleaning.

4.2 ການເກັບຮັກສາ

When not in use for extended periods, store the oscilloscope in a dry, dust-free environment, ideally in its original packaging or a protective case. Avoid extreme temperatures and humidity, which can affect the instrument's electronic components.

4.3 ການອັບເດດເຟີມແວ

Rigol periodically releases firmware updates to enhance performance, add new features, and address any known issues. It is recommended to check the official Rigol website for the latest firmware versions and follow the provided instructions for updating your device.

5. ການແກ້ໄຂບັນຫາທົ່ວໄປ

This section provides solutions to common issues you might encounter with your MSO5074 oscilloscope. For problems not listed here, please refer to the comprehensive user manual available on the Rigol webສະຖານທີ່ຫຼືຕິດຕໍ່ສະຫນັບສະຫນູນດ້ານວິຊາການ.

6. ຂໍ້ກໍານົດດ້ານວິຊາການ

The following table outlines the key technical specifications of the Rigol MSO5074 Digital/Mixed Signal Oscilloscope:

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• Four channel, 70 MHz digital / mixed signal oscilloscope
• Up to 8 GSa/s real-time sampອັດຕາ le
• 100 Mpts memory depth, optional memory depth up to 200 Mpts
• 16 digital channels included (requires optional PLA2216 logic probe to operate)
• High waveform capture rate (over 500,000 wfm/s)

7. ຂໍ້ມູນການຮັບປະກັນ ແລະການຊ່ວຍເຫຼືອ

Rigol products are manufactured to high-quality standards and are typically covered by a manufacturer's warranty. For specific warranty terms and conditions applicable to your MSO5074, please refer to the warranty card included with your product or visit the official Rigol webເວັບໄຊ.

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Rigol customer support. You can find contact information and additional resources on the Rigol Official Store on Amazon ຫຼືບໍລິສັດຂອງພວກເຂົາ webເວັບໄຊ.