InFocus Genesis IN118AA DLP Projector User Manual

ແນະນຳ

This manual provides essential information for the proper setup, operation, and maintenance of your InFocus Genesis IN118AA DLP Projector. Please read this manual thoroughly before using the projector to ensure optimal performance and longevity.

The InFocus Genesis IN118AA is designed for high brightness and vibrant color projection, suitable for various applications including gaming, thanks to its low latency. Its compact and lightweight design facilitates easy portability and installation.

ສິນຄ້າເກີນview

Below is an image of the InFocus Genesis IN118AA DLP Projector, highlighting its general appearance and key components.

ຮູບທີ 1: InFocus Genesis IN118AA DLP Projector. This image displays the front and top view of the projector. The large lens is prominent on the front, with ventilation grilles visible on the sides and top. The InFocus brand name is visible on the top surface.

ຕັ້ງຄ່າ

1. ການຫຸ້ມຫໍ່

• ເອົາໂປຣເຈັກເຕີ ແລະອຸປະກອນເສີມທັງໝົດອອກຈາກເຄື່ອງຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
• Verify that all components listed in the packing list are present. The box typically contains the DLP Projector itself.
• ເກັບຮັກສາການຫຸ້ມຫໍ່ເດີມໄວ້ເພື່ອການຂົນສົ່ງ ຫຼື ການເກັບຮັກສາໃນອະນາຄົດ.

2. ບັນຈຸເຂົ້າຮຽນ

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the unit to prevent overheating. Avoid placing it near heat sources or in direct sunlight.

• ຂະໜາດ: Approximately 5.25 x 0.31 x 1.66 inches (L x W x H).
• ນ້ຳໜັກ: ປະມານ 5.73 ປອນ.

3. ການເຊື່ອມຕໍ່ພະລັງງານ

1. ເຊື່ອມຕໍ່ສາຍໄຟກັບອິນພຸດໄຟຂອງໂປເຈັກເຕີ.
2. ສຽບສາຍໄຟອີກດ້ານໜຶ່ງເຂົ້າໄປໃນປ້ຳໄຟຟ້າທີ່ມີສາຍດິນ.

4. ການເຊື່ອມຕໍ່ແຫຼ່ງທີ່ມາຂອງອິນພຸດ

The InFocus Genesis IN118AA supports various connectivity options:

• HDMI: For high-definition video and audio. Connect an HDMI cable from your source device (e.g., laptop, gaming console) to the HDMI port on the projector.
• USB: For certain data transfer or power supply functions. Refer to the full product manual for specific USB port capabilities.

ຄໍາແນະນໍາການດໍາເນີນງານ

1. ເປີດ / ປິດພະລັງງານ

• ເພື່ອເປີດເຄື່ອງ: Press the power button on the projector or the remote control (if included). The indicator light will change, and the projector will begin its startup sequence.
• ປິດເຄື່ອງ: Press the power button again. A confirmation message may appear. Press the button a second time to confirm shutdown. Allow the projector to cool down before unplugging it.

2. ການປັບແຕ່ງຮູບພາບ

• ຈຸດສຸມ: ໝຸນວົງການໂຟກັສໃສ່ເລນຈົນກວ່າພາບຈະຄົມຊັດ ແລະຊັດເຈນ.
• ການແກ້ໄຂ Keystone: Use the keystone adjustment (manual or digital, depending on model) to correct trapezoidal distortion if the projector is not perfectly perpendicular to the screen.
• ຄວາມລະອຽດ: The native display resolution is 1920 x 1080 (Full HD). Ensure your source device is set to this resolution for the best image quality.

3. ການນຳໃຊ້ທີ່ແນະນຳ

This projector is particularly recommended for ເກມ due to its low latency, providing a responsive and immersive experience.

ບໍາລຸງຮັກສາ

1. ລamp ຊີວິດ

The InFocus Genesis IN118AA features an ultra-long lamp life. To maximize lamp longevity, ensure proper ventilation and avoid frequent power cycles. Replace the lamp only when necessary, following the instructions in the full product manual.

2. ທໍາຄວາມສະອາດ

• ເລນ: ໃຊ້ຜ້າທີ່ອ່ອນນຸ່ມ, ບໍ່ມີເສັ້ນດ່າງທີ່ອອກແບບມາໂດຍສະເພາະສໍາລັບເລນ optical. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດ.
• ພາຍນອກ: ເຊັດດ້ານນອກຂອງໂປເຈັກເຕີດ້ວຍຜ້າອ່ອນ, ແຫ້ງ. ສໍາລັບຝຸ່ນ stubborn, a ເລັກນ້ອຍ damp ຜ້າສາມາດນໍາໃຊ້ໄດ້, ແຕ່ໃຫ້ແນ່ໃຈວ່າບໍ່ມີຄວາມຊຸ່ມຊື່ນເຂົ້າໄປໃນອຸປະກອນ.
• ຊ່ອງລະບາຍອາກາດ: Periodically clean the air vents to prevent dust buildup, which can impede airflow and cause overheating. Use a soft brush or compressed air.

ການແກ້ໄຂບັນຫາ

This section provides solutions to common issues you might encounter. For more complex problems, refer to the full product manual or contact customer support.

• ບໍ່ມີຮູບພາບ:
  • ກວດໃຫ້ແນ່ໃຈວ່າໂປເຈັກເຕີເປີດຢູ່ ແລະໄຟຊີ້ບອກພະລັງງານເປີດຢູ່.
  • ກວດ​ສອບ​ການ​ເຊື່ອມ​ຕໍ່​ສາຍ​ໄຟ​ທັງ​ຫມົດ (HDMI​, ພະ​ລັງ​ງານ​) ມີ​ຄວາມ​ປອດ​ໄພ​.
  • ກວດສອບວ່າໄດ້ເລືອກແຫຼ່ງສັນຍານເຂົ້າທີ່ຖືກຕ້ອງໃນໂປເຈັກເຕີແລ້ວ.
  • Confirm the source device (e.g., laptop) is outputting a signal.
• ຮູບພາບແມ່ນມົວ:
  • ປັບວົງການໂຟກັສໃສ່ເລນ.
  • ໃຫ້ແນ່ໃຈວ່າພື້ນຜິວຂອງການຄາດຄະເນແມ່ນຮາບພຽງຢູ່ແລະໂປເຈັກເຕີມີຄວາມຫມັ້ນຄົງ.
• ຮູບພາບແມ່ນຮູບສີ່ຫຼ່ຽມມຸມສາກ:
  • Adjust the keystone correction setting.
  • ປັບຕຳແໜ່ງໂປເຈັກເຕີໃຫ້ຢູ່ມຸມຂວາງເທົ່າທີ່ເປັນໄປໄດ້ກັບໜ້າຈໍ.
• ບໍ່ມີສຽງ (ຖ້າມີ):
  • Check the audio settings on both the projector and the source device.
  • Ensure volume is not muted.
  • Verify audio cables are correctly connected (if using separate audio).
• ຄຳເຕືອນຄວາມຮ້ອນເກີນ:
  • Ensure air vents are clear and not obstructed.
  • Provide adequate space around the projector for ventilation.
  • Clean dust from vents if necessary.

ຂໍ້ມູນຈໍາເພາະ

The following table outlines the key technical specifications for the InFocus Genesis IN118AA DLP Projector:

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Specific warranty terms and conditions for the InFocus Genesis IN118AA DLP Projector are typically provided with the product documentation or can be found on the official InFocus website. Please refer to these resources for detailed warranty information.

For technical support, service, or additional inquiries, please visit the official InFocus support page or contact their customer service department. Contact information is usually available on the manufacturer's webເວັບໄຊທ໌ຫຼືຢູ່ໃນຄູ່ມືຜະລິດຕະພັນເຕັມ.