ສິນຄ້າເກີນview
This manual provides instructions for the Carrera 1:35 Caterpillar 770 Radio Control Mining Truck. This officially licensed CAT RC vehicle is designed for realistic operation and is suitable for indoor and outdoor use.
ເນື້ອໃນຊຸດ
- 1 x 1:35 Caterpillar 770 Radio Control Mining Truck
- 1 x ການຄວບຄຸມໄລຍະໄກ
- 1 x ຄູ່ມືການສອນ
ຂໍ້ມູນຈໍາເພາະ
- ຂະໜາດຜະລິດຕະພັນ: 13.78 x 6.89 x 7.48 ນິ້ວ
- ນ້ໍາຫນັກລາຍການ: 1.14 ປອນ
- ຂະໜາດ: 1:35
- ຄວາມຖີ່: 2.4GHz
- ໄລຍະການຄວບຄຸມ: ປະມານ 25 ແມັດ
- Truck Batteries: 4 x ຫມໍ້ໄຟ AAA (ບໍ່ລວມ)
- ຫມໍ້ໄຟຄວບຄຸມໄລຍະໄກ: 2 x ຫມໍ້ໄຟ AAA (ບໍ່ລວມ)
- ຜູ້ຜະລິດທີ່ແນະນໍາອາຍຸ: 8 ປີຂຶ້ນໄປ
ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ
Please read and understand all safety warnings before operating the product.
- ບໍ່ເຫມາະສົມສໍາລັບເດັກນ້ອຍຕ່ໍາກວ່າ 3 ປີເນື່ອງຈາກພາກສ່ວນຂະຫນາດນ້ອຍ.
- ໃນລະຫວ່າງການປະຕິບັດງານ, ແນະນຳໃຫ້ຜູ້ໃຫຍ່ເບິ່ງແຍງ.
- Do not operate near people, pets, or obstacles to prevent injury or damage.
- ຮັກສານິ້ວມື, ຜົມ, ແລະເຄື່ອງນຸ່ງວ່າງໄວ້ຫ່າງຈາກພາກສ່ວນທີ່ເຄື່ອນຍ້າຍ.
- ຢ່າດັດແປງຫລືຖີ້ມຜະລິດຕະພັນ.
- Use only recommended batteries and ensure correct polarity during installation.
- Remove batteries from the product and remote control when not in use for extended periods.
ການຕິດຕັ້ງເບື້ອງຕົ້ນ
ການຕິດຕັ້ງຫມໍ້ໄຟ
The mining truck requires 4 AAA batteries. The remote control requires 2 AAA batteries. Batteries are not included.
- Locate the battery compartment on the underside of the mining truck.
- Open the compartment cover and insert 4 AAA batteries, ensuring correct polarity (+/-).
- ປິດຝາປິດຝາຫມໍ້ໄຟ.
- ຊອກຫາຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງການຄວບຄຸມໄລຍະໄກ.
- Open the compartment cover and insert 2 AAA batteries, ensuring correct polarity (+/-).
- ປິດຝາປິດຝາຫມໍ້ໄຟ.
ການຈັບຄູ່ການຄວບຄຸມໄລຍະໄກ
Ensure both the mining truck and the remote control have fresh batteries installed and are switched ON. The remote control operates on a 2.4GHz frequency for stable connection. The devices should automatically pair upon activation. If pairing fails, turn both devices OFF and then ON again.
Operating Your Mining Truck
ການຄວບຄຸມພື້ນຖານ
All functions of the Caterpillar 770 Mining Truck can be controlled remotely via the controller. The control range is approximately 25 meters.
- ໄປໜ້າ/ຖອຍຫຼັງ: Use the primary joystick/lever on the remote control to move the truck forward or backward.
- ການຊີ້ນໍາ: Use the secondary joystick/lever to steer the truck left or right.
- ການດໍາເນີນງານຂອງຕຽງຖິ້ມຂີ້ເຫຍື້ອ: Activate the designated button or lever on the remote control to raise and lower the truck's dump bed for realistic loading and unloading actions.
ວິດີໂອສາທິດຜະລິດຕະພັນຢ່າງເປັນທາງການ
This video demonstrates the features and operation of the 1:35 Radio Control Caterpillar 770 Mining Truck, including its movement and dump bed functionality.
ການດູແລແລະບໍາລຸງຮັກສາ
- Keep the mining truck and remote control clean and dry. Use a soft, damp cloth to wipe surfaces.
- Remove batteries from both the truck and remote control when not in use for extended periods to prevent leakage and damage.
- Avoid exposing the product to extreme temperatures, direct sunlight, or high humidity.
- ຢ່າເອົາຜະລິດຕະພັນເຂົ້າໄປໃນນ້ໍາຫຼືຂອງແຫຼວອື່ນໆ.
- Regularly check for any loose parts or damage. Do not operate if damaged.
ການແກ້ໄຂບັນຫາ
- Truck not responding to remote control:
- Check battery levels in both the truck and remote control. Replace if low.
- Ensure both the truck and remote control are switched ON.
- Turn both devices OFF and then ON again to re-establish the connection.
- Limited control range:
- Ensure there are no large obstructions (walls, furniture) between the remote control and the truck.
- Check battery levels in both devices.
- Slow or weak movement:
- Replace the batteries in the truck with fresh ones.
- Ensure the truck is operating on a smooth, flat surface.
ການຮັບປະກັນ ແລະການຊ່ວຍເຫຼືອລູກຄ້າ
For detailed warranty information, product registration, or technical assistance, please visit the official Carrera webເວັບໄຊທ໌ ຫຼື ຕິດຕໍ່ພະແນກສະໜັບສະໜູນລູກຄ້າຂອງເຂົາເຈົ້າ. ເກັບໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.
