Jandy R0693900 TruClear Salt Cell Assembly Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your Jandy R0693900 TruClear Salt Cell Assembly. Please read this manual thoroughly before attempting any procedures to ensure safe and efficient use of the product.

2. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

Always disconnect power to the pool equipment at the main breaker before performing any service or maintenance.
Wear appropriate personal protective equipment, including safety glasses and gloves, when handling pool chemicals or performing maintenance.
Do not use undiluted muriatic acid for cleaning the salt cell, as this can cause severe damage to the cell and void the warranty. Always follow manufacturer guidelines for chemical dilution and handling.
ຮັບປະກັນວ່າຈຸດເຊື່ອມຕໍ່ທໍ່ນໍ້າທັງໝົດແມ່ນປອດໄພ ແລະ ກັນນໍ້າເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.

3. ຜະລິດຕະພັນເກີນview

The Jandy R0693900 TruClear Salt Cell Assembly is a replacement component for Jandy Pro Series TruClear Chlorinators, designed to generate chlorine for your pool from salt. This assembly includes the cell and its integrated power cable.

Figure 1: Jandy R0693900 TruClear Salt Cell Assembly, showing the cell body and coiled power cable.

4. ຄໍາແນະນໍາການຕິດຕັ້ງ

Replacing the Jandy TruClear Salt Cell Assembly is a straightforward process. Follow these steps carefully:

ວິດີໂອ 1: ຫຼາຍກວ່າview of the Jandy Salt Cell replacement process, demonstrating ease of installation.

4.1. Step 1: Disconnect Power

Before beginning any work, ensure the pool pump and all associated electrical components are turned off at the main circuit breaker. This prevents accidental startup and electrical hazards.

4.2. Step 2: Drain Water

Open the air relief valve at the top of your pool filter to allow water to drain from the system. This will lower the water level in the plumbing, preventing water from spilling when the salt cell is removed.

4.3. Step 3: Remove Old Salt Cell

Locate the existing salt cell in your pool's plumbing system. The cell is typically installed in-line with the return plumbing to the pool. Unscrew the locking ring that secures the cell to the plumbing. Carefully lift the old salt cell assembly out of its housing. Disconnect the power cable from the control box.

Figure 2: The existing Jandy salt cell integrated into the pool's plumbing system.

Close-up of Jandy Salt Cell electrical connector

ຮູບທີ 3: ໄລຍະໃກ້ view of the electrical connector for the Jandy salt cell, which needs to be disconnected from the control box.

4.4. Step 4: Install New Salt Cell

Insert the new Jandy R0693900 TruClear Salt Cell Assembly into the plumbing housing. Ensure the flow arrows on the cell align with the direction of water flow in your plumbing. Tighten the locking ring securely to prevent leaks. Connect the power cable of the new cell to the Jandy TruClear control box.

Figure 4: The new Jandy R0693900 salt cell assembly, ready for installation, showing the integrated cable.

ເທິງ view of Jandy Salt Cell showing flow indicators

ຮູບທີ 5: ທາງເທິງ view of the salt cell, highlighting the flow indicators for correct orientation during installation.

4.5. Step 5: Restore Power and Check Operation

Close the air relief valve on the filter. Restore power to the pool pump and control box at the main circuit breaker. Turn on the pool pump. Verify that the Jandy TruClear control box indicates

ເອກະສານທີ່ກ່ຽວຂ້ອງ - R0693900

	Jandy TruClear Cell Replacement: Spare Parts Installation Guide Official installation instructions for the Jandy TruClear Cell Replacement (Part R0693900) for Jandy Pro Series pool systems. Includes safety warnings, package contents, and step-by-step installation procedures.
	Jandy AquaPure Ei Series APURE35PLG Chlorine Generating Device Installation and Operation Manual Comprehensive installation and operation manual for the Jandy AquaPure Ei Series APURE35PLG 120V Plug-In Chlorine Generating Device. Covers safety, system description, installation, water preparation, operation, maintenance, and troubleshooting.
	Jandy VS Pumps & Gas Heaters: Drop-In Replacement Guide ຄູ່ມືທີ່ສົມບູນແບບຈາກ Jandy ສໍາລັບຜູ້ຊ່ຽວຊານດ້ານສະລອຍນ້ໍາແລະເຈົ້າຂອງເຮືອນກ່ຽວກັບການປ່ຽນເຄື່ອງສູບນ້ໍາສະນຸກເກີແລະເຄື່ອງເຮັດຄວາມຮ້ອນອາຍແກັສທີ່ມີຢູ່ກັບປໍ້າ Jandy VS FloPro ແລະເຄື່ອງເຮັດຄວາມຮ້ອນ JXi. ຄຸນນະສົມບັດປະກອບມີການຕິດຕັ້ງງ່າຍ, ຜົນປະໂຫຍດດ້ານການປະຕິບັດ, ຂໍ້ມູນສະເພາະດ້ານວິຊາການ, ແລະຕາຕະລາງການປຽບທຽບກັບແບບ Pentair ແລະ Hayward.
	Jandy AquaLink RS ຄູ່ມືການຕິດຕັ້ງປຸ່ມທັງຫມົດແລະ OneTouch Control Systems ຄູ່ມືການຕິດຕັ້ງທີ່ສົມບູນແບບສໍາລັບລະບົບການຄວບຄຸມ Jandy AquaLink RS, ກວມເອົາທຸກຮູບແບບປຸ່ມແລະ OneTouch. ຄູ່ມືນີ້ໃຫ້ຄໍາແນະນໍາລະອຽດສໍາລັບການຕິດຕັ້ງ, ສາຍໄຟ, ໂຄງການ, ແລະການແກ້ໄຂບັນຫາສະນຸກເກີແລະອຸປະກອນສະປາອັດຕະໂນມັດ.
	Jandy Pro Series Pool and Spa Air Blower ຄູ່ມືການຕິດຕັ້ງ ຄູ່ມືການຕິດຕັ້ງລາຍລະອຽດສໍາລັບ Jandy Pro Series Pool and Spa Air Blowers (Models PSB110, PSB115, PSB120, PSB210, PSB215, PSB220). ກວມເອົາຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພທີ່ສໍາຄັນ, ການຄິດໄລ່ຂະຫນາດຂອງເຄື່ອງເປົ່າ, ການຕັ້ງຄ່າທໍ່ (ມາດຕະຖານ, ແລ່ນຍາວ, ຕ່ໍາກວ່າເກຣດ, Hartford Loop), ແລະຄໍາແນະນໍາສາຍໄຟຟ້າສໍາລັບການດໍາເນີນງານທີ່ປອດໄພແລະມີປະສິດທິພາບ.
	Jandy Commercial Salt Chlorinator: ຄູ່ມືການຕິດຕັ້ງແລະການດໍາເນີນງານ ຄູ່ມືທີ່ສົມບູນແບບສໍາລັບການຕິດຕັ້ງ, ການດໍາເນີນງານ, ແລະການຮັກສາ Jandy Commercial Salt Chlorinators (Models JSWC40, JSWC53, JSWC80, JSWC100). ກວມເອົາຄວາມປອດໄພ, ລາຍລະອຽດລະບົບ, ການຕິດຕັ້ງ, ການດໍາເນີນງານ, ບໍາລຸງຮັກສາ, ແລະການແກ້ໄຂບັນຫາ.