GOOLOO GP80 800A Peak Car Jump Starter User Manual

1. ບົດແນະນຳ

The GOOLOO GP80 is a lightweight and compact lithium car jump starter designed for 12-volt vehicle batteries. It provides a safe and efficient way to jump start a dead battery in seconds. This device also functions as a portable power bank for various USB devices and includes a built-in LED flashlight for emergencies.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your GOOLOO GP80 jump starter. Please read it thoroughly before use.

2. ເນື້ອໃນຊຸດ

ພາຍຫຼັງການຫຸ້ມຫໍ່, ກະລຸນາຮັບປະກັນວ່າລາຍການທັງໝົດທີ່ລະບຸໄວ້ຂ້າງລຸ່ມນີ້ແມ່ນຢູ່ ແລະຢູ່ໃນສະພາບດີ:

• GOOLOO Jump Starter GP80 Unit
• ສາຍ Jumper ອັດສະລິຍະ
• Quick Charge Micro USB Cable
• ຊຸດກະເປົ໋າ
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

Image: All items included in the GOOLOO GP80 package, including the jump starter, smart jumper cables, USB cable, kit bag, and user manual.

3. ຜະລິດຕະພັນເກີນview ແລະຄຸນສົມບັດ

The GOOLOO GP80 is a versatile device designed for automotive emergencies and portable power needs.

3.1 ລັກສະນະທີ່ສໍາຄັນ

• ເຄື່ອງກະໂດດເລີ່ມຕົ້ນທີ່ມີປະສິດທິພາບ: Capable of restarting vehicles with up to 4.5L gas engines using an 800A peak current. Suitable for cars, motorcycles, RVs, tractors, light-duty trucks, ATVs, and more.
• Power Bank ແບບພົກພາ: Equipped with two USB outputs (5V 2.4A/9V 2A), including a Quick Charge 3.0 port for rapid charging of smartphones, tablets, and other mobile devices.
• Emergency LED Work Light: Features a built-in LED flashlight with three modes: High, Strobe, and SOS, useful for roadside emergencies or outdoor activities.
• ການປົກປ້ອງຄວາມປອດໄພຂັ້ນສູງ: Integrated smart jumper clamps provide protection against over current, short circuit, overload, over-voltage, over-charge, reverse polarity, reverse connection, and over-discharge.

Image: The GOOLOO GP80 jump starter shown with icons representing its capability to start gas engines up to 4.5L, motorcycles, and yachts.

3.2 ສ່ວນປະກອບຂອງຜະລິດຕະພັນ

Familiarize yourself with the different parts of your GP80 unit:

Image: A diagram of the GOOLOO GP80 unit, highlighting the LED power indicator, power button, Quick Charge Input (IN 5V/9V), Quick Charge Output (OUT 5V/9V), standard USB Output (OUT 5V), LED light, and 12V Car Jumpstart port.

• ຕົວຊີ້ວັດພະລັງງານ LED: Displays the remaining battery level and charging status.
• ປຸ່ມເປີດປິດ: Turns the unit on/off and cycles through LED flashlight modes.
• Quick Charge Input (IN 5V/9V): For recharging the GP80 unit.
• Quick Charge Output (OUT 5V/9V): ສຳລັບອຸປະກອນທີ່ຮອງຮັບການສາກໄວ.
• Standard USB Output (OUT 5V): ສຳລັບການສາກໄຟອຸປະກອນ USB ມາດຕະຖານ.
• ໄຟ LED: ໄຟສາຍໃນຕົວ.
• 12V Car Jumpstart Port: Connection point for the smart jumper cable.

4. Setup and Charging the GP80

Before first use, fully charge your GOOLOO GP80 unit.

4.1 ການສາກໄຟເບື້ອງຕົ້ນ

1. Connect the Quick Charge Micro USB Cable to the GP80's Quick Charge Input (IN 5V/9V) port.
2. Connect the other end of the USB cable to a compatible USB wall adapter (not included) or a car charger.
3. The LED power indicators will illuminate and flash during charging. All four LEDs will be solid when the unit is fully charged.

It is recommended to fully charge the unit every 3-4 months to maintain battery health, even if not in use.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 ໂດດເລີ່ມຕົ້ນຍານພາຫະນະ

ປະຕິບັດຕາມຂັ້ນຕອນເຫຼົ່ານີ້ຢ່າງລະມັດລະວັງເພື່ອເຕັ້ນໄປຫາລົດຂອງທ່ານ:

1. Ensure the GP80 unit has at least 50% charge (two LED indicators lit).
2. Connect the blue plug of the smart jumper cable into the 12V Car Jumpstart Port on the GP80 unit. Ensure a firm connection.
3. ຄັດຕິດ ສີແດງ (+) clamp of the smart jumper cable to the positive (+) terminal of your vehicle's battery.
4. ຄັດຕິດ ສີດຳ (-) clamp of the smart jumper cable to the negative (-) terminal of your vehicle's battery.
5. ເມື່ອ clamps are correctly connected, the indicator light on the smart jumper cable will turn ສີຂຽວແຂງ, indicating it is safe to proceed. If it shows a different color or flashes, refer to the troubleshooting section.
6. ເລີ່ມເຄື່ອງຈັກໃນລົດຂອງທ່ານ.
7. Once the engine starts, immediately remove the smart jumper cable's ສີດຳ (-) clamp from the vehicle battery's negative terminal.
8. Then, remove the ສີແດງ (+) clamp from the vehicle battery's positive terminal.
9. Finally, disconnect the blue plug of the smart jumper cable from the GP80 unit.

Important: Do not repeatedly attempt to jump start a large engine vehicle in a short period. Allow the unit to cool down between attempts if necessary.

Image: The smart jumper clamps with an overlay listing protection features such as short circuit, high temperature, reverse connection, over current, surge voltage, reverse polarity, high voltage, and over discharge protection.

5.2 ການໃຊ້ເປັນແບັດເຕີຣີສຳຮອງແບບພົກພາ

The GP80 can charge your electronic devices:

1. Connect your device's USB charging cable to either the Quick Charge Output (OUT 5V/9V) or the standard USB Output (OUT 5V) port on the GP80.
2. Press the power button once to begin charging. The LED indicators will show the remaining battery level.
3. Disconnect your device once fully charged. The GP80 will automatically turn off after a period of inactivity.

Image: The GOOLOO GP80 unit connected via USB cables to charge an iPhone and another smartphone, demonstrating its quick charging capability for various devices like iPads, PSPs, and cameras.

5.3 ການນໍາໃຊ້ໄຟ LED

The built-in LED flashlight offers three modes:

1. ເພື່ອເປີດໃຊ້: Long press the power button for approximately 3 seconds to turn on the LED light in ສູງ ໂໝດ.
2. ເພື່ອໃຊ້ໂໝດວົງຈອນ: ກົດປຸ່ມເປີດປິດອີກຄັ້ງເພື່ອປ່ຽນໄປຫາ Strobe mode. Press it a third time to activate SOS flashing mode.
3. ເພື່ອປິດ: Long press the power button again for approximately 3 seconds.

Image: The GOOLOO GP80 unit with its LED flashlight illuminated, showing icons for Strong, SOS, and Strobe light modes, set against a dark, rainy background with a car.

6. ຂໍ້ຄວນລະວັງຄວາມປອດໄພ

To ensure safe operation and prevent damage to the unit or injury, always observe the following safety guidelines:

• Do not use the jump starter if the smart jumper cable or the unit itself is damaged.
• Do not attempt to jump start a vehicle with a severely damaged or frozen battery.
• Ensure proper polarity when connecting the clamps (red to positive, black to negative). The smart jumper cable provides protection against reverse polarity.
• ບໍ່ອະນຸຍາດໃຫ້ cl ສີແດງແລະສີດໍາamps to touch each other once connected to the GP80.
• ຮັກສາເຄື່ອງໃຫ້ຫ່າງຈາກເດັກນ້ອຍ.
• Do not expose the unit to water, extreme temperatures, or direct sunlight for extended periods.
• ຫ້າມຖອດ ຫຼືດັດແປງໜ່ວຍ.
• Use only the provided smart jumper cable and Quick Charge Micro USB cable.
• Disconnect the smart jumper cable from the vehicle battery within 30 seconds after the engine starts.

7. ການແກ້ໄຂບັນຫາ

If you encounter issues with your GP80, refer to the following common problems and solutions:

8. ຂໍ້ມູນຈໍາເພາະ

Detailed technical specifications for the GOOLOO GP80:

9. ການດູແລແລະບໍາລຸງຮັກສາ

Proper care ensures the longevity and performance of your GP80:

• ການສາກໄຟ: ສາກໜ່ວຍໃໝ່ທຸກໆ 3-4 ເດືອນ, ເຖິງແມ່ນວ່າບໍ່ໄດ້ໃຊ້ກໍ່ຕາມ, ເພື່ອຮັກສາສຸຂະພາບຂອງແບັດເຕີຣີ.
• ການເກັບຮັກສາ: Store the GP80 in its kit bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• ທໍາຄວາມສະອາດ: ເຊັດຕົວເຄື່ອງດ້ວຍຜ້າແຫ້ງ ແລະ ນຸ່ມ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງ ຫຼື ວັດສະດຸທີ່ມີສີຂັດ.
• ການກໍາຈັດຫມໍ້ໄຟ: Do not dispose of the unit in household waste. Follow local regulations for lithium polymer battery recycling.

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

GOOLOO products are designed for reliability and performance. For warranty information, please refer to the warranty card included in your package or visit the official GOOLOO webເວັບໄຊ.

For technical support, troubleshooting assistance, or any questions regarding your GOOLOO GP80, please contact GOOLOO customer service through their official channels.