1. ບົດແນະນຳ
The Fender Acoustic Junior GO amplifier is designed to provide full, natural sound for acoustic-electric guitars and vocals. This portable system features two independent channels, each equipped with studio-quality effects. Key functionalities include Bluetooth wireless audio streaming and an integrated 90-second looper, making it suitable for various performance settings. Its rechargeable battery allows for extended use without a power outlet.
2. ຕັ້ງຄ່າ
2.1. ການຫຸ້ມຫໍ່
ລະມັດລະວັງເອົາ ampເອົາເຄື່ອງດູດຝຸ່ນອອກຈາກການຫຸ້ມຫໍ່. ເກັບຮັກສາວັດສະດຸຫຸ້ມຫໍ່ທັງໝົດໄວ້ສຳລັບການຂົນສົ່ງ ຫຼື ການເກັບຮັກສາໃນອະນາຄົດ. ກວດກາ amplifier for any signs of damage. If damage is present, contact your retailer immediately.
2.2. ເປີດ ແລະ ສາກໄຟ
The Acoustic Junior GO amplifier is equipped with a rechargeable lithium-ion battery. For initial use, it is recommended to fully charge the battery. Connect the provided power adapter to the amplifier's power input and then to a suitable electrical outlet. The charging indicator will illuminate. A full charge provides approximately 5 hours of playing time at full volume or 12 hours at moderate volume. The amplifier can also be operated while connected to AC power.
2.3. ການເຊື່ອມຕໍ່ເຄື່ອງມື ແລະ ໄມໂຄຣໂຟນ
ໄດ້ amplifier features two independent channels:
- ຊ່ອງ 1: Designed for acoustic-electric guitars. Connect your instrument using a standard 1/4-inch instrument cable.
- ຊ່ອງ 2: Designed for microphones. Connect your microphone using an XLR cable. This channel also supports 1/4-inch instrument inputs.
ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ທັງຫມົດແມ່ນປອດໄພກ່ອນທີ່ຈະເປີດເຄື່ອງ ampມີຊີວິດຊີວາ.
3. ຄໍາແນະນໍາການດໍາເນີນງານ
3.1. ການຄວບຄຸມຊ່ອງ
Each channel features independent controls for volume, equalization (bass, middle, treble), and effects. Adjust these controls to achieve your desired sound. Experiment with different settings to find the optimal tone for your instrument or voice.
3.2. ການຈັບຄູ່ Bluetooth
To stream audio wirelessly from a phone or tablet:
- ເປີດໃຊ້ Bluetooth ໃນອຸປະກອນມືຖືຂອງທ່ານ.
- Press the Bluetooth pairing button on the amplifier. The indicator light will flash.
- Select 'Fender Acoustic Junior GO' from the list of available devices on your mobile device.
- Once paired, the indicator light will remain solid, and you can stream audio through the ampມີຊີວິດຊີວາ.
3.3. Looper Function
The onboard 90-second looper allows for recording and layering audio. The looper controls include:
- Record/Dub: Press once to start recording. Press again to overdub.
- ຫຼິ້ນ/ຢຸດ: Press once to play the loop. Press again to stop.
- ຍົກເລີກ: Reverts the last overdub.
Refer to the detailed looper section in the full manual for advanced techniques.
3.4. Tilt-Back Kickstand
ໄດ້ amplifier features an integral tilt-back kickstand. This allows you to angle the amplifier upwards, directing the sound more effectively towards the performer or audience, especially in smaller venues or when placed on the floor.
4. ບໍາລຸງຮັກສາ
4.1. ທໍາຄວາມສະອາດ
ເພື່ອເຮັດຄວາມສະອາດ ampໃຫ້ໃຊ້ຜ້າອ່ອນແລະແຫ້ງ. ສຳລັບຝຸ່ນທີ່ຝັງແໜ້ນ, ໃຫ້ໃຊ້ຜ້າເຊັດໂຕເລັກນ້ອຍ.amp cloth may be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2. ການເກັບຮັກສາ
ເກັບຮັກສາໄວ້ amplifier in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
4.3. ການດູແລຫມໍ້ໄຟ
To maximize the life of the lithium-ion battery:
- ຫຼີກລ່ຽງການສາກແບັດເຕີຣີໃຫ້ໝົດເປັນປະຈຳ.
- ຫ້າມເປີດເຜີຍ amplifier ກັບຄວາມຮ້ອນທີ່ສຸດຫຼືເຢັນ.
- ຖ້າ amplifier will not be used for several months, charge it to approximately 50% every 3-6 months.
5. ການແກ້ໄຂບັນຫາ
This section addresses common issues you might encounter with your Fender Acoustic Junior GO ampມີຊີວິດຊີວາ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີສຽງອອກ | Volume controls are low; cables are not connected properly; instrument/microphone issue; amplifier ບໍ່ໄດ້ເປີດ. | Check all volume knobs (master, channel, instrument/mic). Ensure cables are securely connected. Verify instrument/microphone functionality. Confirm amplifier is powered on and charged. |
| Bluetooth ບໍ່ໄດ້ຈັບຄູ່ | Bluetooth not activated on device; amplifier not in pairing mode; device too far. | Ensure Bluetooth is enabled on your device. Press the amplifier's Bluetooth button to enter pairing mode. Move your device closer to the ampມີຊີວິດຊີວາ. |
| Looper not recording/playing | Incorrect button sequence; looper memory full (unlikely for 90s). | Review the looper operating instructions. Ensure you are pressing the correct buttons for record, dub, play, and stop. |
| ສຽງບິດເບືອນ | Input signal too high; volume too high; faulty cable. | Reduce the input gain or volume on the instrument/microphone channel. Lower the master volume. Try a different cable. |
6. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຊື່ຕົວແບບ | Acoustic Junior GO |
| ໝາຍເລກຕົວແບບ | 2314400000 |
| ຍີ່ຫໍ້ | Fender |
| ຜົນຜະລິດວັດtage | 100 ວັດ |
| ຂະໜາດສິນຄ້າ | 16 x 20 x 16 ນິ້ວ (ສູງ x ກວ້າງ x ເລິກ) |
| ນ້ໍາຫນັກລາຍການ | 20.6 ປອນ |
| ປະເພດຫມໍ້ໄຟ | Lithium-Ion |
| ຊີວິດຫມໍ້ໄຟ | Up to 5 hours (full volume), 12 hours (moderate volume) |
| ການເຊື່ອມຕໍ່ | Bluetooth, 1/4-inch instrument input, XLR microphone input |
| Looper | 90-second with Record/Dub, Play/Stop, Undo |
| ສະບັບtage | ວິທະຍາໄລ voltage ສໍາລັບການນໍາໃຊ້ທົ່ວໂລກ |
7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ຜະລິດຕະພັນ Fender ຖືກອອກແບບມາເພື່ອຄວາມໜ້າເຊື່ອຖື ແລະ ປະສິດທິພາບ. ສຳລັບຂໍ້ມູນກ່ຽວກັບການຄຸ້ມຄອງການຮັບປະກັນ, ການລົງທະບຽນຜະລິດຕະພັນ ຫຼື ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ກະລຸນາເຂົ້າເບິ່ງທີ່ Fender ຢ່າງເປັນທາງການ website or contact Fender customer service. Keep your proof of purchase for warranty claims.
ສະຫນັບສະຫນູນອອນໄລນ໌: www.fender.com/support
