ຄູ່ມືການໃຊ້ງານເຄື່ອງຈັບເວລາແບບກົນຈັກ CHACON 99050

1. ບົດແນະນຳ

The CHACON 99050 Mechanical Timer is designed to automatically switch electrical appliances ON and OFF at pre-set times. This device helps manage power consumption by controlling the operating periods of connected equipment. It features a 24-hour dial with 15-minute segments for precise scheduling.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

• ສໍາລັບການນໍາໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ.
• Do not exceed the maximum load of 3500W (16A).
• Ensure the timer and connected appliance are dry before use.
• Do not immerse in water or expose to excessive moisture.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• Do not disassemble or attempt to repair the timer.

3. ຜະລິດຕະພັນເກີນview

The CHACON 99050 Mechanical Timer features a compact square design with a 24-hour rotating dial and a manual override switch.

ຮູບ 1: ດ້ານຫນ້າ view of two CHACON 99050 Mechanical Timers, highlighting the 24-hour dial and the power socket.

• ໂທ 24 ຊົ່ວໂມງ: Displays time and allows setting ON/OFF periods.
• ຊ່ວງເວລາ (ພິນ): Small, push-down segments around the dial. Each segment represents 15 minutes.
• ສະວິດ Override ດ້ວຍຕົນເອງ: Located on the side, allows immediate activation or deactivation of the connected appliance, bypassing the set program.
• ເຕົ້າຮັບພະລັງງານ: ບ່ອນທີ່ອຸປະກອນທີ່ຈະຄວບຄຸມແມ່ນສຽບຢູ່.

4. ຄໍາແນະນໍາການຕິດຕັ້ງ

1. Plug in the Timer: Insert the CHACON 99050 Mechanical Timer into a standard 230V wall socket.
2. ຕັ້ງເວລາປະຈຸບັນ: Rotate the 24-hour dial clockwise until the current time aligns with the arrow indicator on the timer's body. Ensure AM/PM is correctly observed (e.g., 1 PM is 13 on the dial).

Figure 2: The mechanical timer plugged into a wall outlet, ready for use.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

1. ໄລຍະເວລາເປີດ/ປິດໂປຣແກຣມ:

   The dial is divided into 15-minute segments. To set a period when the appliance should be ON, push down the corresponding segments around the dial. To set a period when the appliance should be OFF, leave the segments in the up position. You can set up to 48 ON/OFF cycles per day.

   Example: To turn an appliance ON from 7:00 AM to 8:00 AM, push down the segments from 7 to 8 on the dial.
2. ເຊື່ອມຕໍ່ອຸປະກອນ: Plug the electrical appliance you wish to control into the power socket on the front of the timer. Ensure the appliance's own power switch is set to the ON position.
3. ຍົກເລີກຄູ່ມື:

   The timer includes a lateral switch. This switch allows you to manually override the programmed settings:

   • ຕັ້ງເປັນ "ເປີດ": The appliance will remain continuously ON, regardless of the dial settings.
   • ຕັ້ງເປັນ "TIMER": The appliance will operate according to the programmed ON/OFF cycles.

6. ບໍາລຸງຮັກສາ

• Clean the timer with a dry, soft cloth. Do not use liquid cleaners or solvents.
• ເກັບຮັກສາເຄື່ອງຈັບເວລາໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງເມື່ອບໍ່ໄດ້ໃຊ້.
• Regularly check the timer and its connections for any signs of damage.

7. ການແກ້ໄຂບັນຫາ

• ອຸປະກອນບໍ່ເປີດ / ປິດໃນເວລາທີ່ຕັ້ງໂຄງການ:
  • Check if the timer is correctly plugged into the wall socket.
  • Verify that the current time is accurately set on the dial.
  • Ensure the correct segments are pushed down for the desired ON periods.
  • Confirm the manual override switch is set to "TIMER".
  • Check if the connected appliance's power switch is in the ON position.
  • Ensure the appliance is functioning correctly when plugged directly into a wall socket.
• Timer is not rotating:
  • Ensure the timer is plugged into a live wall socket.
  • The timer is mechanical and relies on the mains power to operate its internal clock. If the power is interrupted, the time setting may become inaccurate.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For information regarding warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.