Eogifee UC9050T Universal Ceiling Fan Wall Control

ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

Please read and understand all instructions before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards which could cause property damage, personal injury, or death.

• Always disconnect power at the circuit breaker or fuse box before installation or servicing.
• This device is intended for use with ceiling fans only.
• ໃຫ້ແນ່ໃຈວ່າການເຊື່ອມຕໍ່ສາຍໄຟທັງຫມົດແມ່ນປອດໄພແລະປະຕິບັດຕາມລະຫັດໄຟຟ້າທ້ອງຖິ່ນ.
• ບໍ່ໃຫ້ເກີນລະດັບໄຟຟ້າສູງສຸດຂອງອຸປະກອນ.
• ປຶກສາຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ ຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບພາກສ່ວນໃດນຶ່ງຂອງຂະບວນການຕິດຕັ້ງ.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

• UC9050T Wall Control Transmitter
• screws ການຕິດຕັ້ງ
• ເສັ້ນລວດ

ຄຸນສົມບັດຜະລິດຕະພັນ

• Fan 3-Speed Control: Adjust fan speed to High, Medium, or Low.
• ສັບປ່ຽນພະລັງງານຫລັກ: Turn the fan and light power On or Off with a single button.
• ແສງສະຫວ່າງ Dimmer: Controls the brightness of incandescent lights. For LED bulbs, it typically controls On/Off functionality only.
• 4 DIP Switches: For matching frequency with the ceiling fan receiver.

ຮູບພາບ: ຫຼາຍກວ່າview of Eogifee UC9050T Wall Control features, including buttons for High, Medium, Low, Fan Off, Light, and a main On/Off toggle switch.

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

This section outlines the steps for installing your Eogifee UC9050T Wall Control. This product is a transmitter only and requires an existing compatible receiver in your ceiling fan.

1. ການຕັດການເຊື່ອມຕໍ່ພະລັງງານ

Before starting any electrical work, ensure the power supply to the ceiling fan circuit is completely disconnected at the main circuit breaker or fuse box. Verify power is off using a voltage ເຄື່ອງທົດສອບ.

2. ການເຊື່ອມຕໍ່ສາຍໄຟ

Connect the wires from the wall control to the corresponding wires in your wall junction box. This device requires a neutral wire at home for proper operation.

• ເຊື່ອມ​ຕໍ່ ລວດ ດຳ from the wall control to the Live (hot) wire from the wall.
• ເຊື່ອມ​ຕໍ່ ລວດລາຍດິນ (green or bare copper) from the wall control to the Ground wire from the wall.
• ເຊື່ອມຕໍ່ສ່ວນທີ່ເຫຼືອ ລວດ ດຳ from the wall control to the Neutral wire from the wall.

Image: Diagram showing the connection of black (live), green (ground), and black (neutral) wires from the wall control to the household wiring.

3. Setting DIP Switches

The UC9050T Wall Control uses 4 DIP switches to establish communication with your ceiling fan's receiver. These switches must match the pattern set on your existing ceiling fan receiver or original remote control.

1. Locate the 4 DIP switches on the side of the new wall control.
2. Using a small tool (like a pen or small screwdriver), slide the switches to match the exact ON/OFF pattern of your ceiling fan's receiver or previous remote.
3. If you are replacing an old wall control, match the DIP switch settings from the old unit.

ຮູບພາບ: ໃກ້ຊິດ view of the four blue DIP switches on the side of the wall control, labeled 1, 2, 3, 4, with an 'ON' indicator.

4. Mounting the Wall Control

Once wiring and DIP switch settings are complete, carefully push the wires into the wall box and secure the wall control to the box using the provided screws. Attach the faceplate.

ຄໍາແນະນໍາການດໍາເນີນງານ

After installation, restore power at the circuit breaker. The wall control is now ready for use.

• Main Power Switch (Toggle): Use the 'OFF' / 'ON' toggle switch at the bottom to turn the entire unit (fan and light) on or off. When in the 'OFF' position, all other buttons are inactive.
• ປຸ່ມຄວາມໄວພັດລົມ:
  • Press 'HI' for high fan speed.
  • Press 'MED' for medium fan speed.
  • Press 'LOW' for low fan speed.
  • Press 'FAN OFF' to turn the fan off.
• ປຸ່ມແສງສະຫວ່າງ:
  • Press the 'LIGHT' button to turn the light on or off.
  • For incandescent bulbs, press and hold the 'LIGHT' button to dim or brighten the light. Release at the desired brightness level.
  • For LED bulbs, this button typically functions as an On/Off switch only, unless the LED bulbs are specifically designed for dimming with this type of control.

Image: A hand pressing the 'LIGHT' button on the Eogifee UC9050T Wall Control, installed on a wall in a bedroom with a ceiling fan.

Image: A hand pressing the 'LOW' fan speed button on the Eogifee UC9050T Wall Control, installed on a wall in a living room with a ceiling fan.

ບໍາລຸງຮັກສາ

The Eogifee UC9050T Wall Control requires minimal maintenance.

• ທໍາຄວາມສະອາດ: Wipe the surface of the wall control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• ການກວດກາ: Periodically check the wall control for any signs of damage or loose connections. If any issues are found, disconnect power and address them promptly.

ການແກ້ໄຂບັນຫາ

If you experience issues with your Eogifee UC9050T Wall Control, refer to the following common problems and solutions:

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Specific warranty information for the Eogifee UC9050T Wall Control is not provided in this manual. For warranty details or technical support, please refer to the product packaging or contact Eogifee customer service directly through their official webເວັບໄຊທ໌ຫຼືຮ້ານຂາຍຍ່ອຍບ່ອນທີ່ຜະລິດຕະພັນໄດ້ຖືກຊື້.