1. ບົດແນະນຳ
This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage or injury.
The RS PRO RSDS 1052 DL+ is a versatile 2-channel digital storage oscilloscope with a 50 MHz bandwidth, designed for precise signal analysis. It features a 7-inch TFT LCD display for clear waveform visualization and supports various measurement parameters and mathematical operations.
2. ຂໍ້ມູນຄວາມປອດໄພ
Always adhere to the following safety precautions to prevent electric shock, fire, or damage to the instrument.
- ແຫຼ່ງພະລັງງານ: Ensure the oscilloscope is connected to a power source within the specified voltage range (100-240V AC, 50/60Hz).
- ການຕໍ່ດິນ: The instrument must be properly grounded to prevent electric shock. Do not defeat the grounding plug.
- ສະພາບແວດລ້ອມ: Operate the oscilloscope in a dry, well-ventilated area, away from direct sunlight, high temperatures, and excessive dust.
- Probes: Use only probes supplied or recommended by RS PRO. Ensure probes are correctly rated for the voltage ຖືກວັດແທກ.
- ບໍາລຸງຮັກສາ: Refer all servicing to qualified service personnel. Do not attempt to open the instrument casing unless explicitly instructed.
- ປະເພດຄວາມປອດໄພ: This device is rated CAT I, CAT II. Observe all safety warnings on the device and in this manual.
3. ຜະລິດຕະພັນເກີນview ແລະອົງປະກອບ
ພາກນີ້ໃຫ້ຫຼາຍກວ່າview of the RS PRO RSDS 1052 DL+ oscilloscope and its main components.
ຮູບ 3.1: ດ້ານຫນ້າ View of the Oscilloscope. This image shows the front panel of the RS PRO RSDS 1052 DL+ oscilloscope, highlighting the 7-inch TFT LCD display, control knobs, function buttons, and input connectors for channels 1 and 2. The screen displays a typical waveform and FFT analysis.
ຮູບທີ 3.2: ມຸມ View of the Oscilloscope. This image provides an angled perspective of the RS PRO RSDS 1052 DL+ oscilloscope, showcasing its compact design and integrated handle for portability. The side ventilation grilles are also visible.
ຮູບ 3.3: ດ້ານຫລັງ View of the Oscilloscope. This image displays the rear panel of the RS PRO RSDS 1052 DL+ oscilloscope, featuring the power input, USB device port, USB host port, LAN port, and Pass/Fail output. Safety warnings and product labels are also visible.
Figure 3.4: Oscilloscope Probe and Accessories. This image shows a passive oscilloscope probe (1:1/10:1) along with various accessories, including colored rings for channel identification and probe tip covers. These are essential for connecting signals to the oscilloscope.
Figure 3.5: Power Plugs and Probe Tip. This image displays an assortment of power plugs (EU, UK, US types) that may be included with the oscilloscope, along with a specialized probe tip. These ensure compatibility with various power outlets and provide versatility for measurements.
3.1 ອຸປະກອນເສີມ
The RS PRO RSDS 1052 DL+ typically includes the following accessories:
- Passive Probe 1:1/10:1 (x2)
- ສາຍ USB
- ຄູ່ມືເລີ່ມຕົ້ນດ່ວນ
- ໃບຢັ້ງຢືນຄຸນນະພາບ
- ສາຍໄຟ (ສະເພາະພາກພື້ນ)
- CD (including User Manual and EasyScopeX software)
4. ຕັ້ງຄ່າ
4.1 ການຫຸ້ມຫໍ່ແລະການກວດກາ
- Carefully remove the oscilloscope and all accessories from the packaging.
- Inspect the instrument for any signs of physical damage during transit. If damage is found, contact your supplier immediately.
- Verify that all included accessories listed in Section 3.1 are present.
4.2 ການເຊື່ອມຕໍ່ພະລັງງານ
- ໃຫ້ແນ່ໃຈວ່າສະວິດໄຟຢູ່ເທິງແຜງດ້ານຫຼັງຢູ່ໃນຕຳແໜ່ງປິດ.
- Connect the provided power cord to the AC input on the rear panel of the oscilloscope.
- Plug the other end of the power cord into a grounded AC power outlet. The oscilloscope supports 100-240V AC, 50/60Hz.
4.3 ການເຊື່ອມຕໍ່ Probe ແລະການຊົດເຊີຍ
- Connect the BNC connector of the passive probe to one of the input channels (CH1 or CH2) on the front panel.
- Attach the probe tip to the probe compensation output (usually a square wave test signal) on the front panel.
- Adjust the compensation trimmer on the probe until the displayed square wave is flat-topped, without overshoot or undershoot. This ensures accurate measurements.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1 ການດໍາເນີນງານພື້ນຖານ
- ເປີດ/ປິດ: Press the power button on the front panel to turn the oscilloscope on or off.
- ຕັ້ງຄ່າອັດຕະໂນມັດ: ກົດ ອັດຕະໂນມັດ button to automatically adjust vertical, horizontal, and trigger settings for a stable waveform display.
- Vertical Controls: ໃຊ້ volTS/DIV knob to adjust the vertical scale (voltage per division) and the ຕຳແໜ່ງ knob to move the waveform vertically.
- Horizontal Controls: ໃຊ້ SEC/DIV knob to adjust the horizontal scale (time per division) and the ຕຳແໜ່ງ knob to move the waveform horizontally.
- Trigger Controls: ປັບ ລະດັບ knob to set the trigger threshold. The trigger ensures a stable display of repetitive waveforms.
5.2 ຟັງຊັນຂັ້ນສູງ
- ຟັງຊັນການວັດແທກ: ກົດ ວັດແທກ button to access automatic measurement parameters such as Vpp, Vmax, Vmin, Freq, Period, etc.
- ຟັງຊັນຄະນິດສາດ: ກົດ ຄະນິດສາດ button to perform mathematical operations on waveforms (e.g., Add, Subtract, Multiply, Divide, FFT).
- Storage and Recall: ໃຊ້ ບັນທຶກ/ຈື່ buttons to save waveform data, setups, or screenshots to internal memory or a USB drive.
- ການເຊື່ອມຕໍ່ USB: Connect a USB drive to the front panel USB host port for data storage. Use the rear USB device port to connect the oscilloscope to a PC for data transfer and control via EasyScopeX software.
6. ບໍາລຸງຮັກສາ
6.1 ການທໍາຄວາມສະອາດ
- ຖອດສາຍໄຟອອກກ່ອນທຳຄວາມສະອາດ.
- ໃຊ້ອ່ອນ, ງamp cloth with mild detergent to clean the exterior of the instrument.
- Do not use abrasive cleaners or solvents that may damage the plastic parts.
- ຮັບປະກັນວ່າບໍ່ມີຂອງແຫຼວເຂົ້າໄປໃນເຄື່ອງມື.
6.2 ການປັບທຽບ
The oscilloscope is factory calibrated. For optimal performance, periodic calibration by qualified personnel is recommended, typically every 12-24 months, depending on usage and environmental conditions.
6.3 ການເກັບຮັກສາ
When not in use for extended periods, store the oscilloscope in a dry, dust-free environment, away from extreme temperatures and humidity.
7. ການແກ້ໄຂບັນຫາ
ພາກນີ້ສະຫນອງການແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີພະລັງງານ | ສາຍໄຟຖືກຕັດການເຊື່ອມຕໍ່; ປິດເຄື່ອງ; ຟິວຂາດ | Check power cord connection; Turn power switch on; Contact service for fuse replacement. |
| ບໍ່ມີຮູບແບບຄື້ນທີ່ສະແດງ | Input signal too small/large; Incorrect vertical/horizontal settings; Trigger not set correctly; Probe not connected | Adjust VOLTS/DIV and SEC/DIV; Use Auto Setup; Adjust trigger level; Ensure probe is connected and compensated. |
| ຮູບແບບຄື້ນບໍ່ໝັ້ນຄົງ | Incorrect trigger settings; No trigger source selected | Adjust trigger level and mode; Select appropriate trigger source (e.g., CH1, CH2, Ext). |
| ຮູບແບບຄື້ນບິດເບືອນ | Probe compensation incorrect; Probe damaged; Input overloaded | Perform probe compensation; Try a different probe; Check input signal ampຄວາມກວ້າງ. |
If the problem persists after attempting these solutions, please contact RS PRO customer support.
8. ຂໍ້ມູນຈໍາເພາະ
Key technical specifications for the RS PRO RSDS 1052 DL+ Digital Storage Oscilloscope:
- ຊ່ອງອະນາລັອກ: 2
- Oscilloscope Type: ການເກັບຮັກສາດິຈິຕອນ
- ແບນວິດ: 50 MHz
- ເວລາຈິງ S.ampອັດຕາ le: Up to 500 MSa/s
- ຄວາມເລິກຂອງໜ່ວຍຄວາມຈຳ: 32 Kpts
- ປະເພດການສະແດງ: TFT LCD
- ຂະຫນາດຈໍສະແດງຜົນ: 7 inches (800 x 480 pixels)
- Vertical Sensitivity: 2mV/div to 10V/div
- Time Base Range: 10ns/div ຫາ 50s/div
- ການສະຫນອງພະລັງງານ: Mains operated (100-240V AC, 50/60Hz)
- ນ້ຳໜັກ: 2.5 ກິໂລ
- ປະເພດຄວາມປອດໄພ: CAT I, CAT II
- ການໂຕ້ຕອບ: RS232, USB Host, USB Device, LAN
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
RS PRO products are manufactured to high standards and are typically covered by a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official RS PRO webເວັບໄຊສໍາລັບເງື່ອນໄຂການຮັບປະກັນລາຍລະອຽດ.
For technical support, service, or inquiries regarding your RS PRO RSDS 1052 DL+ oscilloscope, please contact RS PRO customer service through their official channels. Contact information can usually be found on the RS PRO website or in the documentation provided with the product.
ຢ່າງເປັນທາງການຂອງ RS PRO Webເວັບໄຊ: https://uk.rs-online.com/web/
