ສາຍ WiFi Hoot ຂອງ KING K901-B Voltage Smart Programmable Thermostat ຄູ່ມືຜູ້ໃຊ້

ແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your KING K901-B Hoot WiFi Line Voltage Smart Programmable Thermostat. This device is designed to provide precise temperature control for electric heating systems, including baseboard, fan-forced, and radiant electric heaters, with the added convenience of WiFi connectivity for remote management.

ກະລຸນາອ່ານຄູ່ມືນີ້ຢ່າງລະອຽດກ່ອນທີ່ຈະຕິດຕັ້ງແລະນໍາໃຊ້ເພື່ອຮັບປະກັນການເຮັດວຽກທີ່ເຫມາະສົມແລະຄວາມປອດໄພ.

ຂໍ້ມູນຄວາມປອດໄພ

• ການຕິດຕັ້ງຕ້ອງໄດ້ປະຕິບັດໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິຕາມລະຫັດໄຟຟ້າທ້ອງຖິ່ນແລະແຫ່ງຊາດ.
• ປິດໄຟຢູ່ທີ່ເບກເກີສະເໝີກ່ອນຕິດຕັ້ງ ຫຼື ສ້ອມແປງເຄື່ອງຄວບຄຸມອຸນຫະພູມ.
• This thermostat is designed for line voltage electric heating systems (120V/208V/240V, Single Pole, 3-Wire). Do not use with low voltage systems (e.g., furnaces, central air conditioners).
• Ensure all wiring connections are secure to prevent electrical hazards.
• ຫ້າມບໍ່ໃຫ້ເຄື່ອງຄວບຄຸມອຸນຫະພູມຖືກນ້ຳ ຫຼື ຄວາມຊຸ່ມເກີນ.

ເນື້ອໃນຊຸດ

• KING K901-B Hoot WiFi Thermostat
• screws ການຕິດຕັ້ງ
• ເສັ້ນລວດ
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

ການຕິດຕັ້ງ

ເຄື່ອງມືທີ່ຕ້ອງການ:

• Screwdriver (Phillips ແລະ Flathead)
• ເສັ້ນລວດ
• ສະບັບtage ເຄື່ອງທົດສອບ

Wiring Instructions (Single Pole, 3-Wire):

1. ປິດໄຟ: Locate the circuit breaker controlling your heating system and turn it OFF. Verify power is off using a voltage ເຄື່ອງທົດສອບ.
2. ເອົາເຄື່ອງຄວບຄຸມອຸນຫະພູມເກົ່າອອກ: ຄ່ອຍໆຖອດເຄື່ອງຄວບຄຸມອຸນຫະພູມທີ່ມີຢູ່ແລ້ວຂອງທ່ານອອກຈາກຝາ. ຖອດສາຍໄຟອອກ, ໂດຍສັງເກດຈຸດເຊື່ອມຕໍ່ຂອງມັນ.
3. ກໍານົດສາຍ: For a single pole, 3-wire installation, you will typically have two line wires (L1, L2 from the power source) and one load wire (to the heater). Consult your existing thermostat's wiring or a qualified electrician if unsure.
4. Connect New Thermostat:
   • Connect the two line wires (L1, L2) from the power source to the thermostat's designated line terminals.
   • Connect the load wire to the thermostat's designated load terminal.
   • ຮັບປະກັນວ່າການເຊື່ອມຕໍ່ທັງໝົດປອດໄພໂດຍໃຊ້ນັອດລວດ.
5. ຕິດຕັ້ງເຄື່ອງຄວບຄຸມອຸນຫະພູມ: Secure the thermostat to the wall using the provided mounting screws.
6. ຟື້ນຟູພະລັງງານ: ເປີດໄຟຄືນຢູ່ທີ່ຕົວຕັດວົງຈອນ.

ໝາຍເຫດ: Incorrect wiring can damage the thermostat or heating system and pose a fire hazard. If you are not comfortable with electrical wiring, please consult a licensed electrician.

Image: The KING K901-B Hoot WiFi Thermostat display, showing the current temperature and set point, alongside the Hoot logo and icons for downloading the app from the App Store and Google Play.

Setup: Hoot Smart Phone App & WiFi Connection

The Hoot thermostat connects to your home WiFi network (2.4GHz only) to enable remote control and programming via the Hoot smartphone app.

1. ດາວ​ໂຫລດ App ໄດ້​: ຊອກຫາ "Hoot Smart Comfort Control" in the Apple App Store or Google Play Store and install it on your smartphone.
2. ສ້າງບັນຊີ: Open the Hoot app and follow the on-screen instructions to create a new user account or log in if you already have one.
3. ເພີ່ມອຸປະກອນ: ໃນແອັບ, ເລືອກຕົວເລືອກເພື່ອເພີ່ມອຸປະກອນໃໝ່.
4. ໂໝດຈັບຄູ່ເຄື່ອງຄວບຄຸມອຸນຫະພູມ: On the thermostat, follow the instructions to put it into WiFi pairing mode. This usually involves holding a specific button or navigating through a menu. The thermostat display will indicate when it's ready to connect.
5. ເຊື່ອມ​ຕໍ່​ກັບ WiFi​: In the Hoot app, select your 2.4GHz home WiFi network and enter the password. The app will guide you through the connection process.
6. ການຢືນຢັນ: Once connected, the thermostat display will show a WiFi icon, and the app will confirm successful pairing.

ສຳຄັນ: The Hoot thermostat only supports 2.4GHz WiFi networks. If you have a dual-band router, ensure your phone is connected to the 2.4GHz band during the setup process.

ຄໍາແນະນໍາການດໍາເນີນງານ

Manual Operation (Touchscreen):

• ປັບອຸນຫະພູມ: ໃຊ້ Up (^) ແລະລົງ (v) arrows on the touchscreen to increase or decrease the set temperature.
• ເປີດ/ປິດ: ກົດປຸ່ມພະລັງງານ (⏻) to turn the heating system on or off.
• ການເລືອກໂໝດ: The thermostat may offer different modes (e.g., Heat, Off). Refer to the on-screen icons for selection.
• ລົບລ້າງຕາຕະລາງ: Manually adjusting the temperature will temporarily override any active schedule. The override duration can often be set or will revert at the next scheduled event.

App Operation (Hoot Smart Comfort Control):

• ການຄວບຄຸມອຸນຫະພູມໄລຍະໄກ: Adjust the temperature from anywhere using the Hoot app on your smartphone.
• ຕາຕະລາງການດໍາເນີນໂຄງການ:
  • Create custom heating schedules with up to 4 or 6 time periods per day for maximum flexibility.
  • Set different schedules for weekdays and weekends, or customize each day individually.
• ຟັງຊັນຖື: Use the "Hold" feature to maintain a specific temperature indefinitely, overriding the schedule until manually released.
• ໂໝດພັກ: Set a specific temperature for an extended period when you are away, saving energy.
• User Defined Max Temperature Lock: Set a maximum temperature limit to prevent overheating or unauthorized adjustments.

ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຊັດໜ້າຈໍເຄື່ອງຄວບຄຸມອຸນຫະພູມ ແລະຮ່າງກາຍດ້ວຍຄວາມອ່ອນໂຍນ, ງamp ຜ້າ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
• ການອັບເດດເຟີມແວ: The thermostat supports Over-The-Air (OTA) firmware upgrades. The Hoot app will notify you if an update is available. Follow the app's instructions to ensure your thermostat has the latest features and improvements.
• ແບັດເຕີຣີ (ຖ້າມີ): ເສັ້ນນີ້ voltage thermostat does not typically require batteries for operation, as it draws power directly from the heating circuit.

ການແກ້ໄຂບັນຫາ

• ເຄື່ອງຄວບຄຸມອຸນຫະພູມບໍ່ເປີດ:
  • ກວດສອບເບຣກເກີ ແລະ ຮັບປະກັນວ່າມັນເປີດຢູ່.
  • ກວດສອບການເຊື່ອມຕໍ່ສາຍໄຟທັງໝົດແມ່ນປອດໄພ ແລະຖືກຕ້ອງ.
• ບໍ່ມີຜົນຜະລິດຄວາມຮ້ອນ:
  • ໃຫ້ແນ່ໃຈວ່າເຄື່ອງຄວບຄຸມອຸນຫະພູມຖືກຕັ້ງໃຫ້ສູງກວ່າອຸນຫະພູມຫ້ອງໃນປະຈຸບັນ.
  • Check if the thermostat is in "Off" mode or "Vacation" mode.
  • Verify the heating system itself is functioning correctly.
• ບັນຫາການເຊື່ອມຕໍ່ WiFi:
  • Confirm your router is broadcasting a 2.4GHz network.
  • Ensure your smartphone is connected to the 2.4GHz network during setup.
  • Move the thermostat closer to the WiFi router if possible, or consider a WiFi extender.
  • Restart your router and the thermostat (by cycling power at the breaker).
  • Re-attempt the WiFi pairing process through the Hoot app.
• ການອ່ານອຸນຫະພູມທີ່ບໍ່ຖືກຕ້ອງ:
  • ໃຫ້ແນ່ໃຈວ່າເຄື່ອງຄວບຄຸມອຸນຫະພູມບໍ່ຖືກແສງແດດໂດຍກົງ, ຮ່າງ, ຫຼືແຫຼ່ງຄວາມຮ້ອນ (ຕົວຢ່າງ, lamps, ເຄື່ອງໃຊ້) ທີ່ສາມາດສົ່ງຜົນກະທົບຕໍ່ເຊັນເຊີຂອງມັນ.
  • The thermostat uses an electronic thermistor for accurate control (±1°F).
• ໜ້າຈໍສໍາຜັດບໍ່ຕອບສະໜອງ:
  • Try cycling power to the thermostat at the circuit breaker to reset it.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the official KING website or contact KING customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

ຜູ້ຜະລິດ: King Electric

Webເວັບໄຊ: www.king-electric.com (ຕ. ຢample link, link ຕົວຈິງອາດຈະແຕກຕ່າງກັນ)