ຄູ່ມືຜູ້ໃຊ້ໂຕະຢືນໄຟຟ້າ FLEXISPOT EN2

1. ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ

Read all instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• ໂຕະນີ້ຖືກອອກແບບມາສໍາລັບການນໍາໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ.
• Ensure all screws are tightened securely before use. Periodically check and re-tighten all fasteners.
• Do not overload the desk. The maximum weight recommendation is 176 pounds (80 kg).
• ໃຫ້ເດັກນ້ອຍ ແລະສັດລ້ຽງຢູ່ຫ່າງຈາກໂຕະເຮັດວຽກໃນລະຫວ່າງການເຮັດວຽກ.
• Avoid placing the desk in direct sunlight or in damp ສະພາບແວດລ້ອມ.
• ຢ່າຖອດປະກອບ ຫຼື ດັດແປງອຸປະກອນໄຟຟ້າຂອງໂຕະ. ຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າເພື່ອຂໍການບໍລິການ.

Warning: The product will arrive in two separate packages and may be shipped separately. Do not discard any packaging until assembly is complete and the desk is fully functional.

2. ເນື້ອໃນຊຸດ

Your FLEXISPOT EN2 Electric Standing Desk is shipped in two packages. Please ensure you have received both packages before beginning assembly.

• ແພັກເກດ 1: Desktop (48" Mahogany Top)
• ແພັກເກດ 2: Desk Frame (Gray Frame), Motor, Control Panel, Power Strip, Cable Management Tray, Hardware, and User Manual.

Figure 2.1: The FlexiSpot EN2 desk components are shipped in two separate packages for safe delivery.

3. ການຕິດຕັ້ງແລະການປະກອບ

Assembly typically requires one person and approximately 30-60 minutes. An electric drill (not included) may be helpful for certain steps.

1. Unpack ອົງປະກອບ: Carefully remove all parts from both packages and lay them out on a soft, clean surface to prevent scratches. Verify all components are present against the packing list.
2. ປະກອບກອບໂຕະ: Attach the lifting columns to the feet. Ensure the crossbeam is correctly oriented.
3. Attach Crossbeam: Secure the crossbeam to the lifting columns. Note that while some holes are pre-drilled for legs, the center holes for the crossbeam and cable tray may require self-tapping screws. Apply firm pressure with an electric drill for easy installation.
4. Install Motors and Control Box: Follow the manual to connect the motor cables to the control box and secure the control box to the frame.
5. ແນບເດັສທັອບ: Carefully place the desktop onto the assembled frame. Align the pre-drilled holes on the desktop with the frame and secure with screws.
6. Install Control Panel and Power Strip: Mount the 6-button digital control panel and the clamp-on power strip to the desired location on the desktop. The power strip can be clipped to the back or side.
7. ການຄຸ້ມຄອງສາຍໄຟ: Utilize the included cable management device to organize and secure all power and data cables underneath the desk. This helps prevent cables from snagging during height adjustments.

Figure 3.1: Assembled FLEXISPOT EN2 Electric Standing Desk.

Figure 3.2: Effective cable management keeps your workspace tidy and safe.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

The desk features a 6-button digital controller for easy height adjustment and memory presets.

4.1 ການປັບຄວາມສູງ

• ຍົກໂຕະ: Press and hold the 'Up' arrow button (▲) to raise the desk. The LED display will show the current height.
• ໂຕະຕ່ຳ: Press and hold the 'Down' arrow button (▼) to lower the desk. The LED display will show the current height.
• The motorized system adjusts smoothly from 28.1 inches to 45.7 inches. The motor operates quietly at less than 50 dB.

4.2 ການກຳນົດຄວາມຈຳລ່ວງໜ້າ

The controller features 4 programmable memory presets to quickly switch between your preferred sitting and standing heights.

1. ປັບໂຕະໃຫ້ໄດ້ຄວາມສູງຕາມທີ່ທ່ານຕ້ອງການໂດຍໃຊ້ປຸ່ມລູກສອນຂຶ້ນ/ລົງ.
2. Press the 'M' button (Memory). The display will show 'S-'.
3. Press one of the number buttons (1, 2, 3, or 4) within 3 seconds. The display will show 'S-1', 'S-2', etc., indicating the height is saved to that preset.
4. To recall a saved height, simply press the corresponding number button (1, 2, 3, or 4). The desk will automatically move to the saved position.

4.3 Integrated Power Strip and USB Ports

The desktop is equipped with a removable power strip for convenient device charging and power access.

• The power strip includes 3 AC outlets (125V/12A) and 2 USB charging ports (5V/2A).
• It can be clipped to the back or side of your desk to suit your setup.

Figure 4.1: Digital control panel for height adjustment and memory presets.

Figure 4.2: Integrated power strip with AC outlets and USB charging ports.

4.4 Timer Function (if available on your model)

Some models may include a timer function to remind you to switch between sitting and standing positions. Refer to your specific model's manual for details on setting and using this feature.

5. ຄຸນສົມບັດ

• ເດັສທັອບທັງໝົດ: The 1-inch eco-friendly desktop provides a seamless and spacious work surface, offering enhanced stability compared to multi-piece desktops.
• ການກໍ່ສ້າງທົນທານ: Constructed with an industrial-grade steel frame and solid tabletop, the desk can support up to 176 pounds (80 kg). Each frame undergoes rigorous testing for performance and durability.
• ມຸມມົນ: The desktop features rounded corners for safety and to prevent accidental bumps or damage.
• ການດໍາເນີນງານງຽບ: The motor operates at less than 50 dB, ensuring a quiet work environment during height adjustments.

Figure 5.1: The whole-piece desktop offers enhanced stability and a smooth surface.

Figure 5.2: The desk operates with a quiet motor, producing less than 50 dB of noise.

Figure 5.3: The desk's robust construction supports up to 176 lbs.

6. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: ເຊັດ desktop ແລະກອບດ້ວຍຜ້າອ່ອນ, damp ຜ້າ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານເຄມີທີ່ຮຸນແຮງທີ່ອາດຈະທໍາລາຍການສໍາເລັດຮູບ.
• ການກວດກາ: ກວດເບິ່ງທຸກສະກູແລະສະກູເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນແຫນ້ນ. ເຄັ່ງຄັດຄືນໃໝ່ຖ້າຈຳເປັນ.
• ການຄຸ້ມຄອງສາຍໄຟ: Ensure cables remain neatly organized and are not pinched or strained during height adjustments.

7. ການແກ້ໄຂບັນຫາ

• ໂຕະບໍ່ຍ້າຍ: Check all cable connections, especially the power cord and motor cables. Ensure the power outlet is functional.
• ການ​ເຄື່ອນ​ໄຫວ​ບໍ່​ສະ​ເຫມີ​ພາບ​: Perform a reset procedure (refer to the full user manual for specific steps). Ensure the desk is not overloaded or obstructed.
• ລະຫັດຂໍ້ຜິດພາດ: If an error code appears on the LED display, consult the comprehensive user manual for specific troubleshooting steps related to that code.

8. ຂໍ້ມູນຈໍາເພາະ

Figure 8.1: Key dimensions and features of the FLEXISPOT EN2 desk.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

FLEXISPOT provides comprehensive warranty coverage for your EN2 Electric Standing Desk:

• ການຮັບປະກັນ 5 ປີ: Applies to frames, motors, and other mechanical devices.
• ການຮັບປະກັນ 2 ປີ: Applies to controllers, switches, and electronics.

For customer support, troubleshooting assistance, or warranty claims, please visit the official FLEXISPOT website ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ.

10. ວິດີໂອຜະລິດຕະພັນຢ່າງເປັນທາງການ