Bellman & Symfon Smoke Alarm Transmitter

1. ບົດແນະນຳ

This manual provides essential information for the proper installation, operation, and maintenance of your Bellman & Symfon Smoke Alarm Transmitter (Model BE1284-433). This device is designed to integrate with the Bellman Visit Smart Home System, providing early fire detection and transmitting alerts to compatible Visit receivers, particularly beneficial for individuals who are deaf or hard of hearing.

ກະລຸນາອ່ານຄູ່ມືນີ້ຢ່າງລະອຽດກ່ອນທີ່ຈະນໍາໃຊ້ຜະລິດຕະພັນເພື່ອຮັບປະກັນການດໍາເນີນງານທີ່ປອດໄພແລະມີປະສິດທິພາບ.

2. ຂໍ້ມູນຄວາມປອດໄພ

• ສຳຄັນ: This smoke alarm transmitter is a component of the Bellman Visit Smart Home System and requires a compatible Bellman Visit receiver (sold separately) to provide alerts. It does not function as a standalone audible smoke alarm.
• ຢ່າທາສີເຄື່ອງກວດຈັບຄວັນ. ສີສາມາດອຸດຕັນຊ່ອງເປີດ ແລະ ລົບກວນຄວາມສາມາດຂອງເຊັນເຊີໃນການກວດຈັບຄວັນ.
• ຢ່າຕິດຕັ້ງໃນພື້ນທີ່ທີ່ມີຄວາມຊຸ່ມຊື່ນສູງ, ອຸນຫະພູມຮຸນແຮງ ຫຼື ມີຝຸ່ນຫຼາຍເກີນໄປ.
• Test the smoke alarm regularly as described in the "Operation" section.
• Replace batteries promptly when indicated.
• Keep out of reach of children unless supervised.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​:

• Bellman & Symfon Smoke Alarm Transmitter (BE1284-433)
• ວົງເລັບ mounting
• screws ແລະ plugs ຝາ
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
• Battery (pre-installed or separate, check packaging)

Image: The Bellman & Symfon Smoke Alarm Transmitter shown with its retail packaging.

4. ຜະລິດຕະພັນເກີນview

4.1 ອົງປະກອບ

The Bellman & Symfon Smoke Alarm Transmitter consists of the following main parts:

• ເຊັນເຊີຄວັນໄຟ: Detects smoke particles.
• Test & Silence Button: Used for testing the alarm and temporarily silencing nuisance alarms.
• ຕົວຊີ້ວັດ LED: Provide visual feedback on status (e.g., power, alarm, fault).
• ຊ່ອງໃສ່ຫມໍ້ໄຟ: Houses the power source.
• ແຜ່ນຕິດ: For secure installation on a ceiling or wall.

Image: The smoke alarm transmitter installed on a ceiling, showing its compact design.

4.2 ຄຸນສົມບັດ

• Wireless transmission to Bellman Visit receivers.
• ອາຍຸການໃຊ້ງານຂອງແບັດເຕີຣີຍາວນານ (ສູງສຸດ 10 ປີ).
• Integrated Test & Silence button.
• "Toast Mode" for temporary sensitivity reduction in cooking areas.
• Designed for individuals who are deaf or hard of hearing, seniors, and assisted living environments.

5. ຕັ້ງຄ່າ

5.1 ການເລືອກສະຖານທີ່

Install the smoke alarm transmitter on the ceiling in the center of a room or hallway. If ceiling mounting is not possible, it can be mounted on a wall, ensuring the top edge is between 4 to 12 inches (10 to 30 cm) from the ceiling.

Avoid installing in:

• Kitchens or bathrooms (due to steam and cooking fumes).
• Near ventilation openings, windows, or doors.
• Areas with extreme temperatures (below 4°C / 39°F or above 38°C / 100°F).

5.2 ການຕິດຕັ້ງ

1. Prepare the Mounting Plate: Detach the mounting plate from the smoke alarm by twisting it counter-clockwise.
2. Mark Drill Holes: Hold the mounting plate against the chosen ceiling or wall location and mark the positions for the drill holes.
3. ເຈາະ ແລະ Mount: Drill holes, insert wall plugs (if necessary), and secure the mounting plate with the provided screws.
4. ຕິດຕັ້ງເຄື່ອງສົ່ງສັນຍານ: Align the smoke alarm transmitter with the mounting plate and twist it clockwise until it clicks securely into place.

Image: Dimensions of the smoke alarm transmitter: Height 4.7" (120 mm), Width 4.7" (120 mm), Depth 1.8" (46 mm), Weight 0.41 lb (185 g) including battery.

5.3 Pairing with a Visit Receiver

To receive alerts, the smoke alarm transmitter must be paired with a Bellman Visit receiver (e.g., Flash Receiver, Alarm Clock Receiver, Pager Receiver, Portable Receiver). Refer to your Visit receiver's manual for specific pairing instructions. Generally, the process involves:

1. Put your Visit receiver into pairing mode.
2. Press and hold the Test & Silence button on the smoke alarm transmitter until the LED indicator flashes, indicating it's sending a pairing signal.
3. Confirm successful pairing on your Visit receiver.

Image: An illustration showing various Bellman Visit transmitters (including the smoke alarm) and receivers placed throughout a home, demonstrating system integration.

6. ການດໍາເນີນງານ

6.1 ການທົດສອບເບື້ອງຕົ້ນ

After installation and pairing, perform an initial test:

• ກົດຄ້າງໄວ້ Test & Silence ປຸ່ມສໍາລັບສອງສາມວິນາທີ.
• The smoke alarm will emit a test signal, and your paired Visit receiver should activate (e.g., flash lights, vibrate).
• If the receiver does not respond, re-check pairing and ensure the transmitter is within range.

6.2 ການເຮັດວຽກປົກກະຕິ

The smoke alarm transmitter continuously monitors for smoke. Upon detection, it will:

• Activate its internal alarm (if equipped, though primarily designed for transmission).
• Transmit an alarm signal to all paired Bellman Visit receivers within range.

Image: The smoke alarm transmitter detecting smoke, indicated by a red LED and smoke visually rising.

6.3 Silence Function (Toast Mode)

The "Toast Mode" allows for temporary reduction of sensitivity to prevent nuisance alarms from cooking fumes. To activate:

• When a nuisance alarm occurs (e.g., from cooking), press the Test & Silence ປຸ່ມ.
• The alarm will be silenced for approximately 10 minutes, and the sensitivity will be reduced.
• After 10 minutes, the alarm will automatically return to normal sensitivity.

Image: A kitchen setting with the smoke alarm installed, illustrating the use of "Toast Mode" to reduce sensitivity during cooking.

7. ບໍາລຸງຮັກສາ

7.1 ການທົດສອບເປັນປະຈຳ

Test the smoke alarm transmitter weekly by pressing the Test & Silence button. Ensure your paired Visit receiver responds correctly.

7.2 ການທໍາຄວາມສະອາດ

Clean the exterior of the smoke alarm transmitter at least once a month using a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Do not open the unit for cleaning.

7.3 ການທົດແທນຫມໍ້ໄຟ

The smoke alarm transmitter is designed for long battery life (up to 10 years). When the battery is low, the unit will typically indicate this with a specific LED flash pattern or a signal to the Visit receiver. Replace the battery immediately when indicated. Refer to the product's internal markings for the correct battery type (usually a non-rechargeable lithium battery).

1. Twist the smoke alarm counter-clockwise to remove it from its mounting plate.
2. ເປີດຊ່ອງໃສ່ຫມໍ້ໄຟ.
3. ຖອດແບັດເຕີຣີເກົ່າອອກແລະຖິ້ມມັນຖິ້ມຕາມລະບຽບການຂອງທ້ອງຖິ່ນ.
4. ໃສ່ແບັດເຕີຣີໃໝ່, ຮັບປະກັນວ່າຂົ້ວທີ່ຖືກຕ້ອງ.
5. Close the battery compartment and reattach the smoke alarm to its mounting plate.
6. Perform a test as described in Section 6.1.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

10.1 30-Day Money Back Guarantee

Bellman & Symfon offers a risk-free refund for all products within 30 days of purchase. If you are not satisfied with your product, please contact customer support for assistance.

10.2 ສະຫນັບສະຫນູນລູກຄ້າ

For any questions, technical assistance, or support regarding your Bellman & Symfon product, please contact us:

• ໂທຟຣີ: (833) BELLMAN / (833) 235 5626
• ອີເມວ: support.bsn@bellman.com