ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງສະຕາດ ແລະ ເຄື່ອງອັດອາກາດ UTRAI Jstar 5

1. ບົດແນະນຳ

The UTRAI Jstar 5 is a versatile multi-function device designed for automotive emergencies and outdoor activities. It combines a powerful jump starter, an electric air compressor, a mobile power bank, and an emergency LED light. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.

2. ຂໍ້ມູນຄວາມປອດໄພ

ກະລຸນາອ່ານ ແລະ ເຂົ້າໃຈຄຳເຕືອນ ແລະ ຄຳແນະນຳດ້ານຄວາມປອດໄພທັງໝົດກ່ອນທີ່ຈະໃຊ້ຜະລິດຕະພັນນີ້. ການບໍ່ປະຕິບັດຕາມຄຳແນະນຳເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ເກີດໄຟຟ້າຊັອດ, ໄຟໄໝ້ ຫຼື ການບາດເຈັບສາຫັດ.

• Always connect the smart clamps correctly to the vehicle battery terminals (red to positive, black to negative).
• ຢ່າແຕະຕ້ອງ cl ສີແດງແລະສີດໍາamps together to avoid short circuits.
• Once the engine starts, disconnect the battery clamps ຈາກຫມໍ້ໄຟລົດແລະ starter ເຕັ້ນໄປຫາພາຍໃນ 30 ວິນາທີ.
• Avoid using the device in extreme cold or humid conditions (-20℃ to 60℃ is the operating range). Performance may be reduced outside this range.
• Do not use the device if the vehicle battery is severely degraded or damaged.
• If the vehicle battery is completely discharged, use the boost mode as described in the operating instructions.
• For long-term storage, recharge the device every 3 months to prolong battery life.
• ຮັກສາອຸປະກອນໃຫ້ຫ່າງຈາກເດັກນ້ອຍ.
• Ensure proper ventilation when using the air compressor; it can generate heat.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• UTRAI Jstar 5 Jump Starter and Air Compressor Unit
• ໝໍ້ໄຟອັດສະລິຍະ Clamps
• ສາຍສາກ USB-C
• DC Car Charger Adapter
• Air Nozzle Adapters (3 pieces)
• ຄູ່ມືຜູ້ໃຊ້
• ຕູ້ເກັບມ້ຽນ

4. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

The UTRAI Jstar 5 offers multiple functionalities:

• ຕົວເລີ່ມຕົ້ນ: 5000A peak current, capable of starting all gasoline vehicles and diesel vehicles up to 8L.
• ເຄື່ອງອັດອາກາດ: Built-in electric air compressor with a maximum pressure of 150 PSI, suitable for tires, balls, and inflatables. Features automatic stop when preset pressure is reached.
• ທະນາຄານພະລັງງານມືຖື: 27000mAh capacity with USB (5V/2.4A) and QC3.0 fast charging output ports for charging smartphones, tablets, and other electronic devices. Includes a DC output port (12V-16V/10A) for car accessories.
• ໄຟ LED ສຸກເສີນ: Equipped with a bright LED light offering illumination, warning (strobe), and SOS modes for various emergency situations.
• ການປົກປ້ອງຄວາມປອດໄພ: Features 9 types of protection including short circuit, reverse connection, over-discharge, over-current, reverse current, low voltage, ລະດັບຄວາມສູງtage, temperature, and overcharge protection. PSE certified.
• ຈໍ LCD ດິຈິຕອລ: Clear display for battery level, tire pressure, and output status.

5. ຕັ້ງຄ່າ

Before first use, fully charge the UTRAI Jstar 5 unit. Connect the provided USB-C charging cable to the device and a suitable power source. The LCD display will indicate the charging status.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1. ໂດດເລີ່ມລົດ

1. Ensure the jump starter is sufficiently charged.
2. ໃສ່ຫມໍ້ໄຟອັດສະລິຍະ clamp plug completely into the jump start port on the UTRAI Jstar 5. The red and green lights on the clamp ຈະກະພິບສະລັບກັນ.
3. ເຊື່ອມຕໍ່ cl ສີແດງamp ກັບຈຸດບວກ (+) ຂອງຫມໍ້ໄຟລົດແລະ cl ສີດໍາamp ກັບຈຸດລົບ (-) terminal.
4. Once connected correctly, the green light on the smart clamp will illuminate steadily, and a click sound may be heard.
5. ສະຕາດເຄື່ອງຈັກຂອງຍານພາຫະນະຂອງທ່ານພາຍໃນ 60 ວິນາທີ.
6. After the engine starts, remove the battery clamps from the car battery and then from the jump starter within 30 seconds.

6.2. ການໃຊ້ເຄື່ອງອັດອາກາດ

1. Remove the air hose from its storage slot on the device.
2. Press the 'OK' button to activate the display, then press the 'M' button to cycle through air inflation modes (car, motorcycle, bicycle, ball).
3. Use the '+' and '-' buttons to set the desired air pressure. Refer to your vehicle's manual or tire sidewall for recommended pressure.
4. Securely connect the air hose to the tire valve. The current tire pressure will be displayed on the LCD.
5. Press the 'OK' button to start inflation. The compressor will automatically stop when the preset pressure is reached.
6. Disconnect the air hose from the tire valve and store it back in the unit.

6.3. Using as a Mobile Power Bank

The UTRAI Jstar 5 can charge various electronic devices:

• Connect your device's USB charging cable to one of the USB output ports (5V/2.4A or QC3.0) on the Jstar 5.
• For 12V car accessories, connect the DC car charger adapter to the DC output port (12V-16V/10A) and then to your accessory (e.g., car vacuum, car refrigerator).

6.4. ການນໍາໃຊ້ໄຟ LED

The integrated LED light has multiple modes for different situations:

• Press the light button (usually indicated by a light bulb icon) on the control panel to cycle through modes: Illumination, Strobe (warning), and SOS.
• The bright light is useful for working in dark engine bays or as a campໃນ​ແສງ​ສະ​ຫວ່າງ​.
• Strobe and SOS modes are for emergency signaling.

7. ບໍາລຸງຮັກສາ

• ການສາກໄຟ: To maintain optimal battery health, fully charge the Jstar 5 every three months, especially during long periods of inactivity.
• ທໍາຄວາມສະອາດ: Wipe the device with a dry, soft cloth. Do not use harsh chemicals or abrasive materials.
• ການເກັບຮັກສາ: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage case for protection.

8. ການແກ້ໄຂບັນຫາ

If you encounter issues with your UTRAI Jstar 5, refer to the following common problems and solutions:

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The UTRAI Jstar 5 comes with a 12-month warranty. If you encounter any issues with the product or have questions, please contact UTRAI customer support directly for assistance. Provide your purchase details and a description of the problem for prompt service.