1. ບົດແນະນຳ
This manual provides detailed instructions for the safe and effective use of the OONO DPST 1NO 1NC 8Amp Power Relay Module, Model F-1022 Series (AC/DC 5V). This module is designed to provide a reliable switching solution for various electrical applications, converting an input control signal into a double-pole, single-throw (DPST) output switch with both Normally Open (NO) and Normally Closed (NC) contacts.
2. ຂໍ້ມູນຄວາມປອດໄພ
ຄຳເຕືອນ: ອັນຕະລາຍຈາກໄຟຟ້າຊອດ
- Always disconnect power before installing, wiring, or performing any maintenance on the relay module.
- ຮັບປະກັນວ່າສາຍໄຟທັງໝົດແມ່ນດຳເນີນການໂດຍຊ່າງໄຟຟ້າທີ່ມີຄຸນວຸດທິ ແລະ ສອດຄ່ອງກັບລະຫັດໄຟຟ້າທ້ອງຖິ່ນ ແລະ ລະດັບຊາດ.
- ຢ່າເກີນ vol ທີ່ລະບຸໄວ້tage and current ratings of the module.
- ຫຼີກລ່ຽງການໃຫ້ໂມດູນຖືກຄວາມຊຸ່ມຊື່ນ, ອຸນຫະພູມທີ່ຮຸນແຮງ, ຫຼື ສະພາບແວດລ້ອມທີ່ກັດກ່ອນ.
- Verify correct polarity for DC connections.
3. ຜະລິດຕະພັນເກີນview
The OONO F-1022 Series relay module features a compact design with pre-wired connections for ease of installation. It includes an LED indicator for relay status and provides both Normally Open (NO) and Normally Closed (NC) contacts for versatile applications.
ຮູບ 3.1: ດ້ານຫນ້າ view of the OONO F-1022 Series relay module, showing the input (GRN, BLU) and output (C1, NO1, C2, NC2) terminals, along with the LED indicator and basic wiring diagram.
Figure 3.2: Angled perspective of the relay module, highlighting the pre-attached input (green and blue) and output (red and black) wires for direct connection.
ຮູບ 3.3: ມຸມອື່ນ view, displaying the label with various control voltage options for the F-1022 Series, including AC/DC 5V, 12V, 24V, 48V, AC 115V, and AC 230V.
Figure 3.4: Technical drawing providing precise dimensions of the relay module in millimeters, useful for mounting and integration into enclosures.
4. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ໝາຍເລກຕົວແບບ | F-1022 Series |
| ສັນຍານຄວບຄຸມການປ້ອນຂໍ້ມູນ | AC/DC 5V (Current: 80mA) |
| Output Switch Type | DPST 1NO 1NC (Double Pole Single Throw, 1x Normally Open and 1x Normally Closed) |
| Rated Current (Output) | 8A / 250VAC or 8A / 30VDC (per switch) |
| ວັດສະດຸຕິດຕໍ່ | ເງິນ |
| ປະເພດການຕິດຕັ້ງ | Screw Mount (Two screw mounting holes provided) |
| ຕົວຊີ້ວັດ | LED for relay action status |
| ຂະໜາດ | 3.7 x 2.2 x 1.3 ນິ້ວ (ປະມານ 94 x 56 x 33 ມມ) |
| ນ້ຳໜັກ | 3.21 ອອນສ໌ (ປະມານ 91 ກຣາມ) |
5. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Follow these steps for proper installation of the relay module:
- ການຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ: Ensure all power sources to the circuit where the relay will be installed are completely disconnected and locked out.
- ການຕິດຕັ້ງ: Secure the relay module using the two screw mounting holes provided on the housing. It can be fixed to a wall or wooden board.
- ສາຍໄຟເຂົ້າ: Connect the control signal wires to the input terminals of the module. For the AC/DC 5V model, connect your 5V AC or DC control signal to the green (GRN) and blue (BLU) input wires. The module requires approximately 80mA for activation.
- ສາຍໄຟອອກ: The module provides DPST (Double Pole Single Throw) output contacts. There are two independent switches, SW1 and SW2.
- SW1 (Common C1, Normally Open NO1): When the input signal is applied, the contact between C1 and NO1 closes.
- SW2 (Common C2, Normally Closed NC2): When the input signal is applied, the contact between C2 and NC2 opens.
- ການຢັ້ງຢືນ: Double-check all wiring connections for correctness and security before restoring power.
6. ຄໍາແນະນໍາການດໍາເນີນງານ
The OONO F-1022 Series relay module operates based on the presence or absence of the input control signal.
- No Input Signal (LED OFF): In the absence of an input control signal, the relay is de-energized. In this state:
- Switch 1 (SW1) is OFF (C1 and NO1 are open).
- Switch 2 (SW2) is ON (C2 and NC2 are closed).
- Input Signal Applied (LED ON): When the AC/DC 5V control signal is applied to the input wires, the relay energizes. In this state:
- Switch 1 (SW1) is ON (C1 and NO1 are closed).
- Switch 2 (SW2) is OFF (C2 and NC2 are open).
- ຕົວຊີ້ວັດ LED: The red LED on the module illuminates when the input control signal is present and the relay is energized, providing a visual indication of its operational status.
7. ບໍາລຸງຮັກສາ
The OONO F-1022 Series relay module is designed for long-term, reliable operation with minimal maintenance. However, periodic checks are recommended:
- ການກວດກາສາຍຕາ: ກວດກາໂມດູນເປັນໄລຍະເພື່ອຫາຮ່ອງຮອຍຂອງຄວາມເສຍຫາຍທາງດ້ານຮ່າງກາຍ, ການປ່ຽນສີ, ຫຼືການເຊື່ອມຕໍ່ທີ່ວ່າງ.
- ທໍາຄວາມສະອາດ: If necessary, gently clean the exterior of the module with a dry, soft cloth. Do not use solvents or abrasive cleaners.
- ຄວາມສົມບູນຂອງການເຊື່ອມຕໍ່: Ensure all wire connections remain secure and free from corrosion.
8. ການແກ້ໄຂບັນຫາ
If you encounter issues with your OONO F-1022 Series relay module, consider the following:
- Relay Not Activating (LED Off):
- Verify that the input control signal (AC/DC 5V) is present and stable.
- Check the input wiring for correct connections and continuity.
- Ensure the input current is sufficient (80mA).
- ການໂຫຼດບໍ່ສະຫຼັບ:
- Confirm the relay LED is illuminating when the input signal is applied. If not, troubleshoot the input signal as above.
- Check the output wiring for correct connections to C1/NO1 or C2/NC2.
- Verify the load circuit is functioning correctly and not drawing excessive current beyond the 8A rating.
- Ensure the load voltage is within the module's rated limits (250VAC or 30VDC).
- ການດໍາເນີນງານແບບບໍ່ຢຸດຢັ້ງ:
- Check for loose wiring connections at both input and output terminals.
- Ensure the input control signal is stable and free from voltage fluctuations or noise.
- Verify the operating environment is within acceptable temperature and humidity ranges.
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information and technical support, please refer to the product packaging or contact your point of purchase. Specific warranty terms and support channels may vary depending on your region and retailer.
