Stabila LAR 160 G Green Rotation Self-Leveling Laser Set User Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the safe and effective use of your Stabila LAR 160 G Green Rotation Self-Leveling Laser Set. This professional-grade tool is designed for precise leveling tasks in both interior and exterior applications, featuring a highly visible green laser beam and robust construction.

ກະ​ລຸ​ນາ​ອ່ານ​ຄູ່​ມື​ນີ້​ຢ່າງ​ລະ​ອຽດ​ກ່ອນ​ທີ່​ຈະ​ປະ​ຕິ​ບັດ​ອຸ​ປະ​ກອນ​ແລະ​ເກັບ​ຮັກ​ສາ​ໄວ້​ສໍາ​ລັບ​ການ​ອ້າງ​ອີງ​ໃນ​ອະ​ນາ​ຄົດ​.

2. ຂໍ້ມູນຄວາມປອດໄພ

Always observe the following safety precautions to prevent injury and damage to the device.

• ລັງສີເລເຊີ: This product emits Class 2 laser radiation. Do not stare directly into the laser beam. Avoid direct eye exposure.
• ສະພາບແວດລ້ອມການດໍາເນີນງານ: Use the laser level only in well-ventilated areas. Keep the device away from moisture, dust, and extreme temperatures.
• ຄວາມປອດໄພຫມໍ້ໄຟ: Use only recommended battery types. Ensure correct polarity when inserting batteries. Do not mix old and new batteries or different types of batteries. Dispose of batteries according to local regulations.
• ບໍາລຸງຮັກສາ: Do not attempt to modify or repair the device yourself. Refer all servicing to authorized Stabila service personnel.
• ເດັກນ້ອຍ ແລະ ບຸກຄະລາກອນທີ່ບໍ່ໄດ້ຮັບອະນຸຍາດ: ຮັກສາອຸປະກອນໃຫ້ໄກຈາກເດັກນ້ອຍ ແລະບຸກຄະລາກອນທີ່ບໍ່ໄດ້ຮັບອະນຸຍາດ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ແລະ​ບໍ່​ໄດ້​ຮັບ​ຄວາມ​ເສຍ​ຫາຍ​ຫຼັງ​ຈາກ​ການ​ຍົກ​ເລີກ​ການ​ຫຸ້ມ​ຫໍ່​:

• Stabila LAR 160 G Green Rotation Laser
• REC 160 R/G Set Receiver
• BST-S Construction Tripod (height-adjustable from 39"–63" / 100–160 cm)
• Hi/Lo Elevation Rod (from 31.5"- 75'' / 80-190 cm)
• Magnetic High-Visibility Plastic Target Plate with Cross-Hair
• ກະເປົ໋າພົກພາແຂງ Shell
• ຄູ່ມືຜູ້ໃຊ້

4. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

The Stabila LAR 160 G offers a range of features for professional leveling applications:

• Fully Automatic, Motor-Driven Rotation Laser: Ensures high leveling accuracy of ± 0.1 mm/m (1/8 inch @ 100 ft).
• Fast Self-Leveling Function: Achieves level within 20 seconds.
• STABILA GREENBEAM Technology: Green laser beams are four times more visible to the human eye than red beams, improving visibility in various conditions.
• Four Laser Functions: Supports horizontal rotation, vertical rotation, plumb-line function, and square (90°) in vertical operation for versatile use.
• IP 65 Protection Class: Dustproof and waterproof, suitable for demanding job site conditions.
• Shock-Absorbent Casing: STABILA soft grip casing provides protection against impacts, with a stable housing cover protecting the laser optics.
• ການຄວບຄຸມງ່າຍ: Operated via three control buttons: on/off, tilt mode, and manual mode.
• Accessible Battery Drawer: Allows for easy battery replacement, even when the device is mounted on a tripod.
• ພື້ນທີ່ເຮັດວຽກຂະຫນາດໃຫຍ່: Up to 600 m (2000 ft) in diameter when used with the REC 160 R/G set receiver.
• ການຕິດຕັ້ງແບບອະເນກປະສົງ: Two 5/8" x 11 threads integrated in the housing for vertical and horizontal applications.

5. ຕັ້ງຄ່າ

5.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

1. Locate the battery drawer on the side of the laser unit.
2. Open the battery drawer and insert the required D-type batteries, ensuring correct polarity (+/-).
3. Close the battery drawer securely.

5.2 Mounting the Laser on the Tripod

1. Extend the legs of the BST-S construction tripod to a stable position.
2. Place the Stabila LAR 160 G laser unit onto the tripod head, aligning the 5/8" x 11 thread.
3. Securely fasten the laser unit to the tripod by turning the tripod's mounting screw.
4. Adjust the tripod height as needed for your application.

5.3 Positioning the Laser

Place the tripod with the laser unit on a firm, level surface. Ensure the area is clear of obstructions that could interfere with the laser beam.

6. ຄໍາແນະນໍາການດໍາເນີນງານ

6.1 Power On/Off and Self-Leveling

1. ກົດ ເປີດ/ປິດ button (marked with a power symbol) to power on the device.
2. The laser will automatically begin its self-leveling process. This typically takes about 20 seconds.
3. Once leveled, the laser beam will rotate continuously.
4. ເພື່ອປິດເຄື່ອງ, ກົດປຸ່ມ ເປີດ/ປິດ ປຸ່ມອີກເທື່ອຫນຶ່ງ.

6.2 Laser Functions

The LAR 160 G supports four primary laser functions:

• ການຫມຸນແນວນອນ: For creating a level plane across a large area. This is the default mode after self-leveling.
• ການຫມຸນແນວຕັ້ງ: Mount the laser vertically using the side 5/8" thread. The laser will project a vertical plane.
• Plumb-Line Function: In vertical operation, the laser can project a plumb-line (vertical point) for alignment.
• Square (90°) Function: In vertical operation, the laser can project a second beam at 90 degrees to the main vertical plane for squaring applications.

6.3 Tilt Mode

The tilt mode allows for manual slope setting. Press the ອຽງ button (labeled 'tilt') to activate. In this mode, the laser will maintain its current angle even if the device is slightly disturbed, but it will not self-level. Use this for setting specific grades.

6.4 ແບບຄູ່ມື

ກົດ ຄູ່ມື button (labeled 'man') to disable self-leveling and manually adjust the laser plane. This is useful for specific non-level applications or when working with a grade rod for slope calculations.

6.5 Using the REC 160 R/G Receiver

For outdoor use or when the laser beam is not visible, use the REC 160 R/G receiver:

1. ເປີດເຄື່ອງຮັບ.
2. Move the receiver into the path of the rotating laser beam.
3. The receiver will indicate when it detects the laser beam, typically with visual and audible signals.
4. Adjust the receiver's position until the center indicator is active, marking the exact level.

6.6 Using the Hi/Lo Elevation Rod

The elevation rod is used in conjunction with the receiver to measure and transfer heights:

1. Attach the REC 160 R/G receiver to the elevation rod.
2. ຂະຫຍາຍ rod ອອກໄປຫາຄວາມສູງທີ່ຕ້ອງການ.
3. Use the receiver to find the laser plane on the rod, then read the measurement.

7. ບໍາລຸງຮັກສາ

7.1 ການທໍາຄວາມສະອາດ

ເຊັດອຸປະກອນດ້ວຍຄວາມອ່ອນ, ງamp cloth. Do not use harsh cleaning agents or solvents. Ensure the laser optics are clean and free of dust for optimal performance.

7.2 ການດູແລຫມໍ້ໄຟ

Remove batteries if the device will not be used for an extended period to prevent leakage. Replace batteries when the low battery indicator appears or performance degrades.

7.3 ການເກັບຮັກສາ

Store the laser set in its hard shell carrying case in a dry, cool place, away from direct sunlight and extreme temperatures.

7.4 ການປັບທຽບ

Regularly check the calibration of your laser level. If you suspect inaccuracies, contact an authorized Stabila service center for professional calibration.

8. ການແກ້ໄຂບັນຫາ

9. ຂໍ້ມູນຈໍາເພາະ

10. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

The Stabila LAR 160 G Green Rotation Self-Leveling Laser Set is covered by a ຮັບປະກັນ 2 ປີຈໍາກັດ ຈາກວັນທີ່ຊື້. ການຮັບປະກັນນີ້ກວມເອົາຂໍ້ບົກພ່ອງຂອງວັດສະດຸແລະການເຮັດວຽກພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ.

For warranty claims, technical support, or service inquiries, please contact Stabila customer service or visit the official Stabila website. Please have your product model number (LAR 160 G) and part number (04500TR) available when contacting support.

ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມ, ໄປຢ້ຽມຢາມ: www.stabila.com