DeWalt DXPMRCH6-800 6-Port Charger Instruction Manual

1. ບົດແນະນຳ

The DeWalt DXPMRCH6-800 is a robust 6-port charging station designed for efficient and simultaneous charging of up to six compatible DeWalt DXPMR800 or DXPMR300 two-way radios. This manual provides essential information for the safe and effective use of your charger.

ມີຫຍັງຢູ່ໃນກ່ອງ:

• 1 x DeWalt DXPMRCH6-800 6-Port Charger Unit
• 1 x Power Adapter with 1.8m Cable

2. ຂໍ້ມູນຄວາມປອດໄພ

ກະລຸນາອ່ານ ແລະເຂົ້າໃຈຄຳແນະນຳຄວາມປອດໄພທັງໝົດກ່ອນທີ່ຈະໃຊ້ສາຍສາກ. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ໄຟຟ້າຊ໊ອກ, ໄຟໄຫມ້, ຫຼືບາດເຈັບສາຫັດ.

• ແຫຼ່ງພະລັງງານ: ໃຊ້ພຽງແຕ່ອະແດບເຕີໄຟຟ້າທີ່ສະໜອງໃຫ້ເທົ່ານັ້ນ. ໃຫ້ແນ່ໃຈວ່າປລັກສຽບໄຟມີລະດັບສຽງtage ກົງກັບສະເປັກຂອງອະແດບເຕີ.
• ສະພາບແວດລ້ອມ: Do not expose the charger to water, rain, or excessive moisture. This product is not waterproof. Operate in a dry, indoor environment.
• ການລະບາຍອາກາດ: Ensure adequate ventilation around the charger. Do not cover the charger or block any ventilation openings.
• ຄວາມເຂົ້າກັນໄດ້: This charger is designed exclusively for DeWalt DXPMR800 and DXPMR300 two-way radios. Do not attempt to charge other devices.
• ຄວາມເສຍຫາຍ: Do not use the charger if the power cord, adapter, or charger unit is damaged. Contact customer support for assistance.
• ການຖອດອອກໄດ້: Do not attempt to disassemble, modify, or repair the charger. This will void the warranty and may cause harm.
• ເດັກນ້ອຍ: ຮັກສາສາຍສາກໃຫ້ໄກຈາກເດັກນ້ອຍ.

3. ຕັ້ງຄ່າ

Follow these steps to set up your DeWalt 6-Port Charger:

1. ແກະກ່ອງ: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. ການຈັດວາງ: Place the charger on a stable, flat, and dry surface, away from direct sunlight or heat sources. The 1.8-meter power cable allows for flexible placement.
3. ເຊື່ອມຕໍ່ພະລັງງານ: Insert the power adapter cable into the DC input port on the back of the charger. Plug the other end of the power adapter into a standard electrical outlet.
4. ເປີດ: The charger is now ready for use. There is no separate power switch; it powers on automatically when connected to an outlet.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

Charging your DeWalt two-way radios is a straightforward process:

1. Insert Radios: Gently slide a compatible DeWalt DXPMR800 or DXPMR300 two-way radio into an available charging slot on the charger. Ensure the radio is seated firmly and correctly.
2. ຕິດຕາມການສາກໄຟ: Each charging port features an individual LED indicator.
• LED ສີແດງແຂງ: Indicates the radio is currently charging.
• LED ສີຂຽວແຂງ: Indicates the radio's battery is fully charged.
• ໄຟ LED ສີແດງກະພິບ: May indicate a charging error or an incompatible battery/radio. Refer to the Troubleshooting section.
3. ເວລາສາກໄຟ: The charger is designed for fast charging, capable of fully charging up to six units in approximately 5 hours. Actual charging time may vary based on battery level and condition.
4. ເອົາວິທະຍຸອອກ: Once the LED indicator turns solid green, the radio is fully charged and can be removed from the charging slot.

5. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາທີ່ເຫມາະສົມຮັບປະກັນອາຍຸຍືນແລະປະສິດທິພາບທີ່ດີທີ່ສຸດຂອງເຄື່ອງສາກໄຟຂອງທ່ານ.

• ທໍາຄວາມສະອາດ: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners, solvents, or abrasive materials.
• ການເກັບຮັກສາ: ເມື່ອບໍ່ໄດ້ໃຊ້, ໃຫ້ເກັບຮັກສາເຄື່ອງສາກໄວ້ໃນບ່ອນທີ່ເຢັນ, ແຫ້ງ, ຫ່າງຈາກແສງແດດໂດຍກົງ ແລະ ອຸນຫະພູມທີ່ຮຸນແຮງ.
• ການກວດກາ: Periodically inspect the power cord and charger unit for any signs of damage. If damage is found, discontinue use and contact customer support.

6. ການແກ້ໄຂບັນຫາ

ຖ້າທ່ານພົບບັນຫາກັບເຄື່ອງສາກຂອງທ່ານ, ໃຫ້ອ້າງອີງເຖິງບັນຫາທົ່ວໄປ ແລະວິທີແກ້ໄຂບັນຫາຕໍ່ໄປນີ້:

• No LED Indicator / Charger Not Powering On:
  • Ensure the power adapter is securely plugged into both the charger and a working electrical outlet.
  • Test the electrical outlet with another device to confirm it has power.
  • Check the power adapter cable for any visible damage.
• Radio Not Charging (Solid Red LED Not Appearing):
  • Ensure the radio is correctly seated in the charging slot and making proper contact with the charging terminals.
  • Verify that the radio's battery is properly installed and not fully discharged to a point where it cannot initiate charging.
  • Try a different charging slot to rule out an issue with a specific port.
• ໄຟ LED ສີແດງກະພິບ:
  • This typically indicates a charging error. Remove the radio, wait a few moments, and reinsert it.
  • Ensure the radio and its battery are compatible with the charger.
  • If the issue persists, the radio's battery may be faulty or at the end of its lifespan.

If these steps do not resolve the issue, please contact DeWalt customer support.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ການຮັບປະກັນຕະຫຼອດຊີວິດທີ່ຈໍາກັດ:

The DeWalt DXPMRCH6-800 6-Port Charger comes with a limited lifetime warranty. This warranty covers defects in materials and workmanship under normal use. Please refer to the official DeWalt warranty policy for full terms and conditions.

ການຊ່ວຍເຫຼືອລູກຄ້າ:

For technical assistance, warranty claims, or further information, please visit the official DeWalt webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການບໍລິການຮັບປະກັນ.