Zebronics H61 Motherboard User Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your Zebronics H61 Motherboard (Model Zeb-H61). This motherboard is designed to support Intel i7/i5/i3/Pentium/Celeron processors with an LGA 1155 socket and DDR3 memory. Please read this manual thoroughly before proceeding with installation to ensure proper setup and functionality.

ຮູບທີ 1.1: ເກີນview of the Zebronics H61 Motherboard. This image displays the full layout of the motherboard, including the CPU socket, RAM slots, PCIe slots, and various connectors.

2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• ຮອງຮັບການປະມວນຜົນ: Compatible with Intel i7/i5/i3/Pentium/Celeron processors in LGA 1155 socket.
• ຊິບເຊັດ: ຊິບເຊັດ Intel H61.
• ໜ່ວຍຄວາມຈຳ: Two DDR3 dual-channel slots supporting DDR3 1066/1333/1600MHz memory, up to 16GB.
• LAN: Realtek 8105E/8111E 100/1000 Mbps Ethernet.
• ສຽງ: Realtek 662 3xAudio Jacks for 6-channel High Definition Audio.
• ຊ່ອງຂະຫຍາຍ: 1 x PCI Express x16 slot, 1 x PCI Express x1 slot.
• ການເກັບຮັກສາ: 4 x SATA 3Gb/s (SATAII) ports.
• ພອດ I/O ຫລັງ: 1 x PS/2 mouse/keyboard port, 1 x VGA port, 1 x HDMI port, 4 x USB 2.0 ports, 1 x LAN port, 3 x audio jacks.
• ຕົວເຊື່ອມຕໍ່ເທິງເຮືອ: Front panel connector, speaker connector, front panel audio connector, 4 x USB 2.0 ports, 4 x SATA 3Gb/s ports, 4-pin CPU fan connector, SYS fan connector, 24-pin ATX power connector, 4-pin ATX 12V power connector, 3-pin clear CMOS header.

ຮູບທີ 2.1: Key features of the H61 Motherboard. This image highlights the H61 chipset, DDR3 memory support, LGA 1155 socket, 5.1 audio, 10/100 LAN, 4 SATA II ports, and PCIe expansion.

3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Before beginning installation, ensure your computer is powered off and unplugged from the wall outlet. Wear an anti-static wrist strap or frequently touch a grounded metal object to prevent electrostatic discharge (ESD) damage to components.

3.1. ການຕິດຕັ້ງ CPU

1. ຊອກຫາຊັອກເກັດ LGA 1155 ຢູ່ໃນເມນບອດ.
2. Gently push down the load lever and pull it sideways to open the CPU socket retention frame.
3. Carefully align the notches on your Intel LGA 1155 processor with the corresponding keys on the socket. Ensure the gold triangle on the CPU aligns with the triangle on the socket.
4. Place the CPU gently into the socket. Do not force it.
5. ປິດກອບຮັກສາ ແລະ ຍູ້ຄັນຍົກກັບຄືນສູ່ຕຳແໜ່ງລັອກຂອງມັນ.
6. ທາຊັ້ນບາງໆ, ແມ້ແຕ່ການວາງຄວາມຮ້ອນໃສ່ເທິງສຸດຂອງ CPU.
7. Install the CPU cooler according to its manufacturer's instructions, ensuring it is securely fastened.

3.2. ການຕິດຕັ້ງ RAM (ໂມດູນຫນ່ວຍຄວາມຈໍາ)

1. ຊອກຫາຊ່ອງສຽບ DDR3 DIMM ສອງຊ່ອງຢູ່ໃນເມນບອດ.
2. ເປີດຄລິບຢູ່ທັງສອງສົ້ນຂອງຊ່ອງສຽບ DIMM.
3. ວາງຈຸດໃສ່ໃນໂມດູນຄວາມຈຳ DDR3 ດ້ວຍກະແຈໃນຊ່ອງສຽບ DIMM.
4. ສຽບໂມດູນໜ່ວຍຄວາມຈຳເຂົ້າໄປໃນຊ່ອງສຽບຢ່າງແໜ້ນ ຈົນກວ່າຄລິບຈະເຂົ້າໃສ່. ໃຫ້ແນ່ໃຈວ່າທັງສອງຄລິບຖືກປິດ.
5. For dual-channel operation, install memory modules in both available slots.

3.3. ການເຊື່ອມຕໍ່ການສະຫນອງພະລັງງານ

1. Connect the 24-pin ATX main power connector from your power supply to the corresponding slot on the motherboard.
2. Connect the 4-pin ATX 12V power connector (CPU power) from your power supply to the designated slot near the CPU socket.

3.4. Connecting Storage Devices (SATA)

1. Locate the 4 SATA 3Gb/s (SATAII) ports on the motherboard.
2. Connect one end of a SATA data cable to a SATA port on the motherboard and the other end to your hard drive or SSD.
3. ເຊື່ອມຕໍ່ສາຍໄຟ SATA ຈາກແຫຼ່ງຈ່າຍໄຟຂອງທ່ານໄປຫາອຸປະກອນເກັບຂໍ້ມູນ.

3.5. Installing Expansion Cards

1. Identify the PCI Express x16 slot for a graphics card or the PCI Express x1 slot for other expansion cards.
2. ເອົາຝາປິດຊ່ອງສຽບການຂະຫຍາຍທີ່ສອດຄ້ອງກັນອອກຈາກກໍລະນີ PC ຂອງທ່ານ.
3. Align the card with the slot and press down firmly until it is seated correctly. Secure the card with a screw to the PC case.

3.6. Connecting Front Panel and Rear I/O

Connect the front panel connectors (power switch, reset switch, HDD LED, power LED, front panel audio, USB ports) to their respective headers on the motherboard. Refer to the motherboard diagram for exact pin assignments.

ຮູບທີ 3.1: Rear I/O Panel of the Zebronics H61 Motherboard. This image shows the ports available at the back of the motherboard, including PS/2, VGA, HDMI, USB 2.0, LAN, and audio jacks.

• ຜອດ PS/2: For legacy keyboard or mouse.
• ຜອດ VGA: For connecting to a monitor using a VGA cable.
• HDMI Port: For connecting to a monitor or display using an HDMI cable.
• ພອດ USB 2.0: ສໍາລັບການເຊື່ອມຕໍ່ອຸປະກອນ USB.
• LAN Port: For connecting to a network via an Ethernet cable.
• ສຽງ Jacks: For connecting speakers, headphones, or microphones.

4. ຄໍາແນະນໍາການດໍາເນີນງານ

4.1. First Boot

1. After all components are installed and connected, close your PC case.
2. Connect your monitor, keyboard, mouse, and power cable.
3. Turn on the power supply switch (if applicable) and then press the power button on your PC case.
4. The system should boot up. If it does not, refer to the Troubleshooting section.

4.2. ການຕິດຕັ້ງ BIOS

The BIOS (Basic Input/Output System) is firmware that initializes hardware during the booting process. To enter BIOS setup:

• During the initial boot sequence, repeatedly press the DEL or F2 key (the exact key may vary, check on-screen prompts).
• Within the BIOS, you can configure various system settings such as boot order, date/time, CPU/memory settings, and enable/disable integrated peripherals.
• Save changes before exiting the BIOS.

4.3. ການຕິດຕັ້ງໄດເວີ

After installing your operating system, install the necessary drivers for the motherboard's components (chipset, LAN, audio, etc.). These drivers are typically provided on a CD/DVD included with the motherboard or can be downloaded from the Zebronics official webເວັບໄຊ.

5. ບໍາລຸງຮັກສາ

• ການກຳຈັດຂີ້ຝຸ່ນ: ປົກກະຕິເຮັດຄວາມສະອາດຂີ້ຝຸ່ນຈາກເມນບອດແລະອົງປະກອບໂດຍໃຊ້ອາກາດບີບອັດ. ກວດໃຫ້ແນ່ໃຈວ່າລະບົບປິດ ແລະຖອດປລັກອອກກ່ອນທຳຄວາມສະອາດ.
• ອັບເດດ BIOS: Periodically check the Zebronics webເວັບໄຊທ໌ສໍາລັບການອັບເດດ BIOS. ການປັບປຸງ BIOS ສາມາດປັບປຸງຄວາມຫມັ້ນຄົງຂອງລະບົບ, ຄວາມເຂົ້າກັນໄດ້, ແລະປະສິດທິພາບ. ປະຕິບັດຕາມຄໍາແນະນໍາການອັບເດດຢ່າງລະມັດລະວັງເພື່ອຫຼີກເວັ້ນການທໍາລາຍ motherboard.
• ການຄຸ້ມຄອງສາຍໄຟ: ໃຫ້ແນ່ໃຈວ່າສາຍໄຟທັງໝົດຖືກວາງໄວ້ຢ່າງເປັນລະບຽບ ແລະ ບໍ່ກີດຂວາງການໄຫຼວຽນຂອງອາກາດພາຍໃນເຄສ PC.

6. ການແກ້ໄຂບັນຫາ

ຖ້າເຈົ້າພົບບັນຫາ, ເບິ່ງຂັ້ນຕອນການແກ້ໄຂບັນຫາທົ່ວໄປຕໍ່ໄປນີ້:

• ບໍ່ມີພະລັງງານ:
  • Check if the power supply is connected correctly to the motherboard (24-pin and 4-pin connectors).
  • ໃຫ້ແນ່ໃຈວ່າສະວິດການສະຫນອງພະລັງງານຢູ່ໃນຕໍາແຫນ່ງ 'ON'.
  • Verify that the front panel power switch connector is correctly attached to the motherboard header.
• ບໍ່ມີການສະແດງຜົນ:
  • Ensure the monitor is connected to the correct video output (VGA or HDMI on the motherboard, or a dedicated graphics card).
  • Check if the RAM modules are properly seated in their slots. Try reseating them.
  • If using a dedicated graphics card, ensure it is fully seated in the PCIe slot and has auxiliary power connected (if required).
  • ລອງເປີດເຄື່ອງດ້ວຍ RAM ພຽງອັນດຽວ.
• ລະບົບບໍ່ສະຖຽນ/ຂັດຂ້ອງ:
  • ກວດເບິ່ງອຸນຫະພູມ CPU ແລະ GPU. ຄວາມຮ້ອນເກີນສາມາດເຮັດໃຫ້ເກີດຄວາມບໍ່ສະຖຽນລະພາບ.
  • ໃຫ້ແນ່ໃຈວ່າໄດເວີທັງຫມົດຖືກຕິດຕັ້ງແລະທັນສະໄຫມ.
  • ເປີດໃຊ້ເຄື່ອງມືກວດສອບໜ່ວຍຄວາມຈຳເພື່ອກວດສອບ RAM ທີ່ມີບັນຫາ.
  • Verify that the power supply is sufficient for all components.
• ບໍ່ກວດພົບອຸປະກອນຕໍ່ພ່ວງ:
  • Ensure the device is properly connected to the correct port (USB, SATA, etc.).
  • ກວດເບິ່ງຕົວຈັດການອຸປະກອນໃນລະບົບປະຕິບັດການຂອງທ່ານສໍາລັບບັນຫາໄດເວີ.
  • Test the peripheral on another system if possible.

7. ຂໍ້ມູນຈໍາເພາະ

ຮູບທີ 7.1: Detailed specifications as provided on the product packaging. This image lists CPU support, chipset, memory, BIOS, I/O interface, onboard interface, integrated sound, integrated LAN, expansion slots, and form factor.

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information and technical support, please refer to the documentation included with your product or visit the official Zebronics webເວັບໄຊ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

Zebronics Official Webເວັບໄຊ: www.zebronics.com

For further assistance, you may contact Zebronics customer support through their webເວັບໄຊ ຫຼືລາຍລະອຽດການຕິດຕໍ່ທີ່ສະໜອງໃຫ້ຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນຂອງທ່ານ.