ຄູ່ມືຜູ້ໃຊ້ແຊັບຊີເກມ Phanteks Evolv X2 Mid-Tower

ແນະນຳ

This manual provides detailed instructions for the Phanteks Evolv X2 Mid-Tower Gaming Chassis. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance of your system.

ຮູບພາບ: ດ້ານຫນ້າ view of the Phanteks Evolv X2 Mid-Tower Gaming Chassis, showcasing its tempered glass panels and internal structure.

ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ກ່ອນ​ທີ່​ຈະ​ສືບ​ຕໍ່​ການ​ຕິດ​ຕັ້ງ​:

• Phanteks Evolv X2 Chassis
• Accessory Box (screws, zip ties, manual)
• D-RGB Lighting Cables
• ຮາດແວຕິດຕັ້ງເພີ່ມເຕີມ

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps for proper installation of your components into the Phanteks Evolv X2 chassis.

1. ການກະກຽມໂຄງລົດ

Carefully remove the tempered glass panels. Refer to the accessory box for specific instructions on panel removal to prevent damage.

ຮູບພາບ: ພາຍໃນ view of the Phanteks Evolv X2 chassis, showing the spacious layout for component installation.

2. ການຕິດຕັ້ງເມນບອດ

The Evolv X2 supports ATX, Micro ATX, and Mini ITX motherboards. Install standoffs as required for your motherboard form factor. Secure the motherboard using the provided screws.

This chassis also supports ATX rear-connect mainboards, which can simplify cable management by routing connections to the rear of the motherboard tray.

Image: Close-up of the motherboard tray within the Phanteks Evolv X2, highlighting mounting points and cable routing options.

3. ການຕິດຕັ້ງການສະຫນອງພະລັງງານ

The power supply unit (PSU) is mounted at the front of the chassis. Secure the PSU using the provided screws.

4. ການຕິດຕັ້ງໄດຣຟ໌ເກັບຂໍ້ມູນ

Install your 2.5-inch and 3.5-inch storage drives into the designated bays. Refer to the accessory box for specific mounting hardware and locations.

5. Cooling System Configuration

The Evolv X2 features a vertical cooling system designed for optimal airflow. It supports:

• Bottom Intake: Triple 120mm fan positions for air intake.
• Top Exhaust: Triple 120mm fan positions with dedicated 360mm radiator clearance for exhaust.
• ທໍ່ລະບາຍອາກາດຫລັງ: One 120mm fan position.

Ensure fans are oriented correctly for intake and exhaust to maintain efficient airflow.

ຮູບພາບ: View of the bottom fan mounting positions in the Phanteks Evolv X2, designed for air intake.

ຮູບພາບ: ເທິງ view of the Phanteks Evolv X2, showing the fan and radiator mounting area for exhaust.

Image: Diagram illustrating the vertical airflow path within the Phanteks Evolv X2 chassis, with air entering from the bottom and exiting from the top.

6. ການຕິດຕັ້ງບັດກາຟິກ

Install your graphics card into the appropriate PCIe slot on your motherboard. Ensure it is securely fastened. The chassis provides ample space for high-end GPUs up to 380mm in length.

ຮູບພາບ: ພາຍໃນ view of the Phanteks Evolv X2, showcasing a graphics card installed and integrated D-RGB lighting.

7. ການຄຸ້ມຄອງສາຍໄຟ

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics. The design supports ATX rear-connect mainboards for a cleaner setup.

Image: A fully assembled Phanteks Evolv X2 system demonstrating effective cable management and component layout.

8. D-RGB Lighting Connection

Connect the integrated D-RGB lighting cables to your motherboard's D-RGB header or a compatible D-RGB controller. Refer to your motherboard manual for specific D-RGB header locations.

ຄໍາແນະນໍາການດໍາເນີນງານ

Once all components are installed and connected, replace the tempered glass panels. Connect your peripherals and power cable, then power on your system.

The integrated D-RGB lighting can be controlled via compatible motherboard software or an external D-RGB controller, allowing for customization of lighting effects and colors.

ບໍາລຸງຮັກສາ

Regular maintenance helps ensure the longevity and performance of your chassis and components.

• ການກັ່ນຕອງຂີ້ຝຸ່ນ: Periodically clean the dust filters located at the intake points (e.g., bottom of the chassis) to maintain optimal airflow and prevent dust buildup inside the system.
• ແຜງແກ້ວ Tempered: ເຮັດຄວາມສະອາດແຜງກະຈົກດ້ວຍຜ້າອ່ອນທີ່ບໍ່ມີຂົນ ແລະ ນໍ້າຢາເຊັດແກ້ວທີ່ບໍ່ເຮັດໃຫ້ກະຈົກເສຍຫາຍ. ຫຼີກລ່ຽງສານເຄມີຮຸນແຮງທີ່ອາດຈະເຮັດໃຫ້ແກ້ວ ຫຼື ສານເຄືອບເສຍຫາຍໄດ້.
• ທຳ ຄວາມສະອາດພາຍໃນ: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

ການແກ້ໄຂບັນຫາ

ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.

• ລະບົບບໍ່ເປີດ:
  • Verify all power cables are securely connected to the motherboard, graphics card, and power supply.
  • ໃຫ້ແນ່ໃຈວ່າສະຫຼັບການສະຫນອງພະລັງງານຢູ່ໃນຕໍາແຫນ່ງ "ON".
  • Check front panel header connections to the motherboard (Power SW, Reset SW).
• D-RGB Lighting Not Working:
  • Confirm D-RGB cables are correctly connected to the motherboard's D-RGB header or a dedicated controller.
  • Ensure D-RGB software (if applicable) is installed and configured correctly.
• ກະແສລົມບໍ່ດີ/ອຸນຫະພູມສູງ:
  • Check fan orientation; intake fans should draw air in, exhaust fans should push air out.
  • ທຳຄວາມສະອາດຕົວກອງຝຸ່ນ ແລະ ອົງປະກອບພາຍໃນ.
  • Ensure no cables are obstructing airflow paths.

ຂໍ້ມູນຈໍາເພາະ

ຂໍ້ມູນການຮັບປະກັນ

For detailed warranty information regarding your Phanteks Evolv X2 chassis, please refer to the official Phanteks webເວັບໄຊ ຫຼືບັດຮັບປະກັນລວມຢູ່ໃນຜະລິດຕະພັນຂອງທ່ານ. ເງື່ອນໄຂການຮັບປະກັນອາດຈະແຕກຕ່າງກັນໄປຕາມພາກພື້ນ.

ສະຫນັບສະຫນູນ

If you require further assistance or have questions not covered in this manual, please visit the official Phanteks support webເວັບໄຊສໍາລັບ FAQs, ຄົນຂັບ, ແລະຂໍ້ມູນຕິດຕໍ່.

Visit Phanteks Support