MOUNTUP Monitor Mount Instruction Manual

1. ບົດແນະນຳ

Thank you for choosing the MOUNTUP Single Computer Monitor Stand. This full motion gas spring desk monitor arm is designed to enhance your workspace ergonomics by providing flexible positioning for your monitor. It is compatible with most flat and curved computer monitors from 17 to 32 inches, supporting a maximum weight of 17.6 lbs. This manual will guide you through the installation, operation, and maintenance of your new monitor mount.

2. ຂໍ້ມູນຄວາມປອດໄພ

Please read and understand all instructions before installation and use. Failure to do so may result in personal injury or property damage. If you have any questions, please contact MOUNTUP customer support.

• ບໍ່ເກີນຄວາມອາດສາມາດນ້ໍາຫນັກສູງສຸດຂອງ 17.6 lbs (8 kg).
• ໃຫ້ແນ່ໃຈວ່າໜ້າໂຕະມີຄວາມໝັ້ນຄົງ ແລະ ແຂງແຮງພຽງພໍທີ່ຈະຮອງຮັບນ້ຳໜັກລວມຂອງຕົວຍຶດ ແລະ ຈໍພາບ.
• Always keep the arm in a horizontal position during gas spring tension adjustment to prevent injury or damage.
• Use all provided hardware and follow the installation steps precisely.
• ຮັກສາເດັກນ້ອຍ ແລະສັດລ້ຽງໄວ້ໄກໃນລະຫວ່າງການຕິດຕັ້ງ.

3. ລາຍການບັນຈຸ

ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ ແລະບໍ່ມີຄວາມເສຍຫາຍກ່ອນທີ່ຈະເລີ່ມການຕິດຕັ້ງ.

Figure 3.1: Key features and compatibility of the MOUNTUP monitor mount.

ຊຸດຄວນປະກອບມີ:

• Monitor Arm Assembly (Upper and Lower Arms)
• Desk Pole
• C-Clamp ຖານ
• ອົງປະກອບພື້ນຖານ Grommet
• ແຜ່ນ VESA
• All necessary screws, washers, and Allen keys
• ຄູ່ມືການສອນ

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Choose between C-Clamp or Grommet mounting based on your desk type and preference.

Figure 4.1: The monitor mount offers both C-Clamp ແລະຕົວເລືອກການຕິດຕັ້ງ Grommet.

4.1 C-Clamp ການຕິດຕັ້ງ

1. ຄັດຕິດ C-clamp base to the desk pole using the provided screws and Allen key.
2. Position the assembled clamp and pole on the edge of your desk.
3. ແຫນ້ນ C-clamp ໝຸນຈົນກວ່າຕົວຍຶດຈະຖືກຍຶດຕິດກັບໂຕະຢ່າງແໜ້ນໜາ. ຮັບປະກັນວ່າມັນໝັ້ນຄົງ ແລະ ບໍ່ສັ່ນ.

4.2 Grommet Installation

1. ຖອດ C-clamp by removing the screw and plate.
2. Insert the desk pole through the grommet hole in your desk.
3. Secure the pole from underneath the desk using the grommet base plate and tightening knob.

4.3 Attaching VESA Plate to Monitor

1. ຄ່ອຍໆວາງຈໍພາບຂອງທ່ານໃຫ້ຫງາຍໜ້າລົງເທິງພື້ນຜິວທີ່ອ່ອນນຸ້ມ ແລະ ສະອາດ.
2. Align the VESA plate with the mounting holes on the back of your monitor (75x75mm or 100x100mm).
3. Secure the VESA plate to the monitor using the appropriate screws. Do not overtighten.

4.4 Attaching Monitor to Arm

1. Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
2. Ensure the monitor is fully seated and then tighten the security bolt to prevent accidental detachment.

4.5 ການຈັດການສາຍ

Route your monitor cables through the integrated cable management clips on the arm and pole to maintain a tidy workspace.

Figure 4.2: Effective cable management keeps your desk organized.

4.6 ຄູ່ມືວິດີໂອການຕິດຕັ້ງ

Video 4.1: A detailed installation guide for the MOUNTUP Single Monitor Mount (MU0025).

5. ການດໍາເນີນງານແລະການປັບຕົວ

The MOUNTUP monitor arm offers full motion capabilities for optimal viewສະດວກສະບາຍ.

Figure 5.1: The monitor arm provides extensive adjustability for ergonomic positioning.

5.1 Gas Spring Tension Adjustment

Adjust the gas spring tension to match your monitor's weight for smooth and stable positioning. Keep the arm in a horizontal position during adjustment.

Figure 5.2: Adjusting the gas spring tension for optimal monitor support.

• If the arm shoots up: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• If the arm falls down: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

5.2 ການປັບຕົວອຽງ

The monitor can tilt +90° (up) and -45° (down) to reduce glare and optimize viewມຸມ.

• Loosen the tilting bolt on the VESA plate.
• Position the screen to your desired angle.
• Retighten the tilting bolt to fix the angle.

5.3 ການໝຸນ ແລະ ການໝຸນ

The arm allows for extensive swivel and 360° rotation for landscape or portrait orientation.

Figure 5.3: Achieve perfect viewing angles with 360-degree rotation.

• Lower Arm Swivel: ±135°
• Upper Arm Swivel: ±180°
• Screen Swivel: ±90°
• Screen Rotation: 360°

5.4 Adjustment Video Guide

Video 5.1: Guide to Gas Spring Tension & Tilting Adjustment for MOUNTUP Monitor Mount (MU0025).

Video 5.2: Demonstration of the MOUNTUP Single Monitor Desk Mount (MU0025) functions.

6. ບໍາລຸງຮັກສາ

ການບໍາລຸງຮັກສາເປັນປົກກະຕິຮັບປະກັນອາຍຸຍືນແລະການປະຕິບັດທີ່ດີທີ່ສຸດຂອງ mount ຈໍພາບຂອງທ່ານ.

• ທໍາຄວາມສະອາດ: ເຊັດ mount ກັບອ່ອນ, damp ຜ້າ. ຫຼີກລ້ຽງການເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍທີ່ອາດຈະທໍາລາຍການສໍາເລັດຮູບ.
• ການກວດກາ: ກວດສອບສະກູ ແລະ ຈຸດເຊື່ອມຕໍ່ທັງໝົດເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນແໜ້ນ ແລະ ແໜ້ນດີ. ຂັນໃຫ້ແໜ້ນຄືນຖ້າຈຳເປັນ.
• ອາຍແກັສ Spring: ຖ້າຄວາມຕຶງຂອງສະປິງແກັສຮູ້ສຶກວ່າຜິດປົກກະຕິ, ໃຫ້ອ້າງອີງໃສ່ພາກທີ 5.1 ສຳລັບຄຳແນະນຳໃນການປັບ.

7. ການແກ້ໄຂບັນຫາ

ຖ້າ​ຫາກ​ທ່ານ​ພົບ​ບັນ​ຫາ​ໃດ​ຫນຶ່ງ​, ເບິ່ງ​ບັນ​ຫາ​ທົ່ວ​ໄປ​ດັ່ງ​ຕໍ່​ໄປ​ນີ້​ແລະ​ການ​ແກ້​ໄຂ​:

• Monitor arm falls down or shoots up: This indicates incorrect gas spring tension. Refer to Section 5.1 for proper adjustment based on your monitor's weight.
• Monitor tilts forward or backward unexpectedly: The tilting bolt may be loose. Refer to Section 5.2 to loosen, adjust, and retighten the tilting bolt.
• ການຕິດຕັ້ງຮູ້ສຶກບໍ່ໝັ້ນຄົງ ຫຼື ສັ່ນຄອນ: ຮັບປະກັນ C-clamp or grommet base is securely tightened to the desk. Check all connection points on the arm and VESA plate.
• Difficulty moving the arm: The tension might be too high for a lighter monitor, or the joints might need lubrication (though typically not required for gas spring arms). Ensure no cables are snagged.

ຖ້າບັນຫາຍັງຄົງຢູ່, ກະລຸນາຕິດຕໍ່ຝ່າຍຊ່ວຍເຫຼືອລູກຄ້າ.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

All MOUNTUP monitor mounts are backed by 3-year support. Our friendly customer support team is available to answer any questions within 12 hours. For assistance, please visit the official MOUNTUP website or contact us directly through your purchase platform.