1. ບົດແນະນຳ
The LAUNCH CRP239 is an intelligent and networkable automotive diagnostic tool designed for passenger cars. It offers comprehensive OBD II full functionality and rapid testing capabilities for four major vehicle systems: Engine, Automatic Transmission (A/T), Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS). Additionally, the CRP239 includes advanced reset functions such as Oil Reset, Steering Angle Reset, Brake-Pad Reset, Battery Matching, Throttle Adaptation, and Diesel Particulate Filter (DPF) Regeneration, catering to the needs of professional technicians and DIY enthusiasts.
2. ຂໍ້ມູນຄວາມປອດໄພ
Always observe the following safety precautions when operating the LAUNCH CRP239:
- Ensure the vehicle's ignition is off before connecting or disconnecting the diagnostic tool.
- ຢ່າໃຊ້ເຄື່ອງມືໃນສະພາບທີ່ປຽກ ຫຼື ໃກ້ກັບຂອງແຫຼວໄວໄຟ ຫຼື ອາຍແກັສ.
- ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນຕົວທີ່ເໝາະສົມ, ເຊັ່ນ: ແວ່ນຕານິລະໄພ, ເມື່ອເຮັດວຽກຢູ່ໃນຍານພາຫະນະ.
- Refer to the vehicle's service manual for specific diagnostic procedures and safety warnings.
- Keep the tool away from strong magnetic fields.
- Only use the provided cables and accessories.
3. ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນຊຸດ:
- LAUNCH CRP239 Main Unit
- OBD II ສາຍວິນິດໄສ
- ສາຍ USB
- ຄູ່ມືຜູ້ໃຊ້
- ກະເປົາຖື
Figure 3.1: Contents of the LAUNCH CRP239 package, showing the diagnostic tool, cables, and storage case.
4. ຜະລິດຕະພັນເກີນview
The LAUNCH CRP239 features a robust design with a 5.0-inch 720p touch screen for intuitive navigation. It includes physical buttons for common operations and a durable rubber exterior for protection.
ຮູບ 4.1: ດ້ານຫນ້າ view of the LAUNCH CRP239, highlighting the touch screen display and navigation buttons.
4.1. ສ່ວນປະກອບ
- ໜ້າຈໍສຳຜັດ 5.0 ນິ້ວ: High-resolution display for clear data presentation and touch input.
- ປຸ່ມນຳທາງ: Directional pad, OK button, and Return button for menu navigation.
- ຕົວເຊື່ອມຕໍ່ OBD II: Standard 16-pin connector for vehicle communication.
- ພອດ USB: For connecting to a computer for updates or data transfer.
- ຕົວຊີ້ບອກພະລັງງານ: LED light indicating power status.
5. ຕັ້ງຄ່າ
Follow these steps for initial setup of your LAUNCH CRP239:
- ສາກອຸປະກອນ: Connect the CRP239 to a power source using the provided USB cable to ensure the internal 4000mAh lithium-polymer battery is fully charged before first use.
- ເປີດ: ກົດປຸ່ມເປີດປິດຄ້າງໄວ້ເພື່ອເປີດອຸປະກອນ.
- ການເລືອກພາສາ: On the initial setup screen, select your preferred language. The device supports multilingual operation.
- ການເຊື່ອມຕໍ່ Wi-Fi: Navigate to the 'Settings' menu and select 'Wi-Fi'. Connect to an available wireless network to enable online updates and diagnostic report sharing.
- ອັບເດດຊອບແວ: It is recommended to perform a software update immediately after connecting to Wi-Fi to ensure you have the latest features and vehicle coverage. Navigate to the 'Update' section and follow the on-screen prompts.
Figure 5.1: The LAUNCH CRP239 with its diagnostic cable connected, ready for vehicle communication.
6. ຄໍາແນະນໍາການດໍາເນີນງານ
The LAUNCH CRP239 provides a comprehensive suite of diagnostic functions. Below are instructions for common operations.
6.1. ການເຊື່ອມຕໍ່ກັບຍານພາຫະນະ
- Locate the vehicle's 16-pin OBD II diagnostic port (usually under the dashboard).
- ໃຫ້ແນ່ໃຈວ່າລະບົບຈູດໄຟຂອງຍານພາຫະນະປິດຢູ່.
- Connect the OBD II diagnostic cable to the vehicle's OBD II port and to the CRP239.
- Turn the vehicle's ignition to the ON position (engine off). The CRP239 will power on automatically.
6.2. ເມນູຫຼັກນໍາທາງ
From the main menu, you can access various functions:
Figure 6.1: The main menu interface of the LAUNCH CRP239, providing access to all primary functions.
- ການວິນິດໄສ: For full system diagnostics (Engine, A/T, ABS, SRS).
- ຂ້ອຍ/ຊາຍ: Readiness status for emissions.
- OBD II: Standard OBD II functions (read/clear DTCs, live data, freeze frame, O2 sensor test, etc.).
- ຕັ້ງຄ່າ ໃໝ່: Access various maintenance reset functions.
- ຫມໍ້ໄຟ Voltage: Displays real-time vehicle battery voltage.
- ອັບເດດ: For software and firmware updates via Wi-Fi.
- ຂໍ້ມູນ: Review saved diagnostic data and reports.
- ການຕັ້ງຄ່າ: Configure device settings such as language, Wi-Fi, and display.
6.3. Performing a Diagnostic Scan
- ຈາກເມນູຫລັກ, ເລືອກ "ການວິນິດໄສ".
- The tool will attempt to automatically identify the vehicle via VIN scan. If unsuccessful, you may need to manually select the vehicle make, model, and year.
- Choose the system you wish to diagnose (e.g., Engine, Transmission, ABS, SRS).
- ເລືອກ "Read Fault Codes" ກັບ view Diagnostic Trouble Codes (DTCs).
- ເລືອກ "Clear Fault Codes" to erase DTCs after repairs have been made. Caution: Clearing codes without addressing the underlying issue will result in the codes reappearing.
- ເລືອກ "Read Data Stream" ກັບ view live sensor data.
6.4. Using Reset Functions
The CRP239 supports several common maintenance reset functions:
- ຣີເຊັດນ້ຳມັນ: Resets the oil life reminder after an oil change.
- ການຕັ້ງຄ່າມຸມພວງມາໄລຄືນໃໝ່: Resets the steering angle sensor after alignment or component replacement.
- Brake-Pad Reset (EPB): ຕັ້ງຄ່າລະບົບເບກຈອດລົດແບບອີເລັກໂທຣນິກຄືນໃໝ່ຫຼັງຈາກປ່ຽນຜ້າເບກ.
- Battery Matching (BMS): Registers a new battery with the vehicle's Battery Management System.
- Throttle Adaptation: ຮຽນຮູ້ຕຳແໜ່ງຂອງຕົວຄັນເລັ່ງຄືນໃໝ່ຫຼັງຈາກທຳຄວາມສະອາດ ຫຼື ປ່ຽນແທນ.
- DPF Regeneration: ເລີ່ມຕົ້ນຂະບວນການຟື້ນຟູຕົວກອງອະນຸພາກກາຊວນ.
To use a reset function, select "Reset" from the main menu, then choose the desired function and follow the on-screen instructions.
6.5. ການປັບປຸງຊອບແວ
The CRP239 supports one-click Wi-Fi updates for software and vehicle coverage, ensuring you always have the latest diagnostic capabilities.
- ໃຫ້ແນ່ໃຈວ່າອຸປະກອນເຊື່ອມຕໍ່ກັບເຄືອຂ່າຍ Wi-Fi ທີ່ໝັ້ນຄົງ.
- ຈາກເມນູຫລັກ, ເລືອກ "ອັບເດດ".
- The device will check for available updates. Select the updates you wish to install and confirm.
- Allow the update process to complete without interruption. The device may restart during this process.
Figure 6.2: The update screen on the LAUNCH CRP239, showing available software updates for various vehicle brands.
6.6. Diagnostic Report Generation
The CRP239 can automatically generate diagnostic reports, which can be shared via email.
- After completing a diagnostic session, the tool will prompt you to generate a report.
- Confirm to generate the report.
- ທ່ອງໄປຫາ "Data" ເມນູເພື່ອ view saved reports.
- Select a report and choose the option to share via email. Ensure your Wi-Fi is connected and email settings are configured in the 'Settings' menu.
7. ບໍາລຸງຮັກສາ
Proper maintenance ensures the longevity and optimal performance of your LAUNCH CRP239:
- ທໍາຄວາມສະອາດ: ໃຊ້ຜ້າປຽກແຫ້ງເພື່ອເຮັດຄວາມສະອາດອຸປະກອນ. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ການເກັບຮັກສາ: Store the device in its carrying case in a cool, dry place when not in use. Avoid extreme temperatures.
- ການດູແລຫມໍ້ໄຟ: Charge the battery regularly, even if the device is not in frequent use, to maintain battery health. Avoid fully discharging the battery for extended periods.
- ການກວດສອບສາຍ: Periodically inspect the diagnostic and USB cables for any signs of damage. Replace damaged cables immediately.
8. ການແກ້ໄຂບັນຫາ
This section addresses common issues you might encounter with the LAUNCH CRP239.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ອຸປະກອນບໍ່ເປີດ. | Low battery; faulty connection to vehicle. | Charge the device fully. Ensure the OBD II cable is securely connected to both the CRP239 and the vehicle. Check vehicle's ignition is ON. |
| ບໍ່ສາມາດສື່ສານກັບຍານພາຫະນະໄດ້. | Incorrect vehicle protocol; faulty OBD II port; damaged cable. | Verify vehicle compatibility. Check the vehicle's OBD II port for power. Try a different vehicle or cable if available. Ensure vehicle ignition is ON. |
| ການອັບເດດຊອບແວລົ້ມເຫລວ. | Unstable Wi-Fi connection; insufficient storage. | Ensure a strong and stable Wi-Fi connection. Check available storage space on the device. Restart the update process. |
| ໜ້າຈໍບໍ່ຕອບສະໜອງ. | ຊອບແວ glitch; ຄວາມເສຍຫາຍທາງດ້ານຮ່າງກາຍ. | Perform a soft reset by holding the power button until the device restarts. If the issue persists, contact customer support. |
9. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຕົວແບບ | CRP239 (CREADER PROFESSIONAL 239) |
| ຈໍສະແດງຜົນ | 5.0-inch 720p Touch Screen |
| ແບັດເຕີຣີ | 4000mAh Lithium Polymer ທີ່ສາມາດສາກໄດ້ (ລວມ) |
| ການເຊື່ອມຕໍ່ | OBD II, Wi-Fi, USB |
| ການຄຸ້ມຄອງຍານພາຫະນະ | Domestic, Asian, European vehicles (1996 and newer OBD2) |
| ລະບົບທີ່ຮອງຮັບ | Engine, Automatic Transmission (A/T), ABS, SRS |
| ຫນ້າທີ່ພິເສດ | Oil Reset, Steering Angle Reset, Brake-Pad Reset (EPB), Battery Matching (BMS), Throttle Adaptation, DPF Regeneration |
| ຂະໜາດ | 32.4 x 25.4 x 8 cm (ຊຸດ) |
| ນ້ໍາຫນັກລາຍການ | 560 g |
| ວັດສະດຸພາຍນອກ | ຢາງ |
10. ຂໍ້ມູນການຮັບປະກັນ
The LAUNCH CRP239 comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your product package or visit the official Launch webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.
ທາງເລືອກການຮັບປະກັນແບບຂະຫຍາຍອາດຈະສາມາດໃຊ້ໄດ້ຈາກຜູ້ໃຫ້ບໍລິການພາກສ່ວນທີສາມ. ຕົວຢ່າງample, ການຮັບປະກັນຂະຫຍາຍ 1 ປີແລະ 2 ປີໂດຍ Salama Care ແມ່ນສະເຫນີໃຫ້ຜະລິດຕະພັນນີ້.
11. ສະຫນັບສະຫນູນ
For technical assistance, product inquiries, or support, please contact Launch customer service through their official website or the contact information provided in your product documentation. Ensure you have your product model number (CRP239) and serial number ready when contacting support.
ສໍາລັບຊັບພະຍາກອນເພີ່ມເຕີມ, ໄປຢ້ຽມຢາມ Launch Official Webເວັບໄຊ.
