ແນະນຳ
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw. Please read these instructions carefully before using the tool to ensure safe and optimal performance. This tool is designed for cutting wood and similar materials.
ຄໍາແນະນໍາຄວາມປອດໄພ
ຄຳເຕືອນຄວາມປອດໄພຂອງເຄື່ອງມືໄຟຟ້າທົ່ວໄປ:
- ຄວາມປອດໄພໃນພື້ນທີ່ເຮັດວຽກ: Keep the work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- ຄວາມປອດໄພທາງໄຟຟ້າ: ຫຼີກເວັ້ນການສໍາຜັດກັບຮ່າງກາຍກັບພື້ນດິນຫຼືຫນ້າດິນເຊັ່ນ: ທໍ່, radiators, ຂອບເຂດ, ແລະຕູ້ເຢັນ. ມີຄວາມສ່ຽງສູງຕໍ່ການເກີດໄຟຟ້າຊັອດ ຖ້າຮ່າງກາຍຂອງເຈົ້າຖືກດິນ ຫຼືດິນ.
- ຄວາມປອດໄພສ່ວນຕົວ: Always wear appropriate personal protective equipment (PPE) including eye protection, hearing protection, and a dust mask. Stay alert, watch what you are doing, and use common sense when operating a power tool.
- ການນໍາໃຊ້ ແລະການດູແລເຄື່ອງມືພະລັງງານ: Ensure the switch is in the off-position before connecting to the battery pack, picking up, or carrying the tool. Disconnect the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Use the correct power tool for your application. Do not force the power tool.
- ບໍາລຸງຮັກສາ: ຮັກສາເຄື່ອງມືໄຟຟ້າ ແລະອຸປະກອນເສີມ. ກວດເບິ່ງຄວາມຜິດປົກກະຕິຫຼືການຜູກມັດຂອງຊິ້ນສ່ວນເຄື່ອນທີ່, ການແຕກຫັກຂອງຊິ້ນສ່ວນ, ແລະເງື່ອນໄຂອື່ນໆທີ່ອາດຈະສົ່ງຜົນກະທົບຕໍ່ການເຮັດວຽກຂອງເຄື່ອງມືໄຟຟ້າ.
Specific Circular Saw Safety Warnings:
- ຮັກສາມືຢູ່ຫ່າງຈາກພື້ນທີ່ຕັດແລະແຜ່ນໃບ. ຢ່າໄປຮອດໃຕ້ແຜ່ນວຽກ.
- ປັບຄວາມເລິກຂອງການຕັດ to the thickness of the workpiece.
- Never hold the workpiece in your hands or across your leg while cutting. Secure the workpiece to a stable platform.
- Check the lower guard for proper closing before each use. Do not operate the saw if the lower guard does not move freely and close instantly.
- Always use blades of the correct size and shape for the arbor hole.
- ຢ່າໃຊ້ເຄື່ອງຊັກຜ້າໃບ ຫຼືລູກກອດທີ່ເສຍຫາຍ ຫຼືບໍ່ຖືກຕ້ອງ.
ສິນຄ້າເກີນview
Familiarize yourself with the components of your Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw before operation.
Image: The Einhell TE-CS 18/165-1 Li-Solo Cordless Circular Saw, showcasing its red and grey housing, ergonomic handle, blade guard, and robust base plate. The saw blade is clearly visible, highlighting the tool's design for portability and ease of use.
ອົງປະກອບທີ່ສໍາຄັນ:
- ມືຈັບຫຼັກ: Ergonomic grip for primary control and operation.
- ມືຈັບຕົວຊ່ວຍ: Provides additional stability and control during cutting.
- ປຸ່ມເປີດ/ປິດ: ເປີດໃຊ້ ແລະປິດໃຊ້ງານມໍເຕີ.
- Spindle Lock: Button used to lock the spindle for safe and easy saw blade changes.
- Blade Guard: Retractable guard that protects the user from the rotating blade.
- Base Plate (Saw Table): The flat surface that rests on the workpiece, guiding the saw during cuts.
- ລີເວີການປັບຄວາມເລິກ: Mechanism for setting the desired cutting depth.
- ລີເວີການປັບຕົວ Bevel: Mechanism for setting the desired cutting angle for bevel cuts.
- Saw Blade: The cutting accessory, typically a 165mm diameter blade with a 20mm arbor hole.
- Dust Extraction Adapter: Port for connecting a dust collection system to minimize sawdust.
- ຊ່ອງສຽບແບັດເຕີຣີ: Slot for inserting the Einhell Power X-Change 18V battery pack (battery not included).
ຕັ້ງຄ່າ
1. ການຕິດຕັ້ງຫມໍ້ໄຟ
Ensure the tool is switched off before installing or removing the battery pack.
- Align the battery pack with the receptacle on the tool.
- ເລື່ອນຊຸດແບັດເຕີຣີເຂົ້າໄປໃນບ່ອນສຽບຈົນກວ່າມັນຈະເຂົ້າທີ່ຢ່າງແໜ້ນໜາ.
- ເພື່ອເອົາອອກ, ໃຫ້ກົດປຸ່ມປ່ອຍໃສ່ຊຸດຫມໍ້ໄຟແລ້ວເລື່ອນອອກ.
2. ການຕິດຕັ້ງແຜ່ນໃບຄ້າຍຄື
Always disconnect the battery pack before changing the saw blade to prevent accidental startup.
- ກົດປຸ່ມລັອກ spindle ຄ້າງໄວ້ເພື່ອປ້ອງກັນບໍ່ໃຫ້ແຜ່ນໃບຫມຸນ.
- Use the provided wrench to loosen the blade retaining screw by turning it clockwise (this is a left-hand thread).
- ເອົາແຜ່ນຕັດນອກອອກແລະໃບເຫັນເກົ່າ.
- Clean the inner flange and the blade mounting area thoroughly.
- Place the new saw blade onto the inner flange, ensuring the rotation direction arrow on the blade matches the arrow on the saw's housing.
- Replace the outer flange and tighten the blade retaining screw counter-clockwise (left-hand thread) firmly with the wrench while holding the spindle lock.
3. ການປັບຄວາມເລິກຂອງການຕັດ
The cutting depth should be set so that the blade teeth protrude slightly below the workpiece, typically by about 2-3 mm, for efficient cutting and reduced kickback.
- ຖອດ lever ປັບຄວາມເລິກ.
- Move the base plate up or down to achieve the desired cutting depth, using the depth scale as a guide.
- ບີບຕົວປັບຄວາມເລິກໃຫ້ແໜ້ນເພື່ອລັອກການຕັ້ງຄ່າ.
4. ການປັບມຸມ Bevel
The saw can make bevel cuts up to 45 degrees for angled cuts.
- ຖອດລີເວີການປັບຕົວອອກ.
- ອຽງເລື່ອຍໄປຫາມຸມທີ່ຕ້ອງການ, ທີ່ລະບຸໄວ້ໃນລະດັບມຸມອຽງ.
- Tighten the bevel adjustment lever securely to lock the angle.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ການເລີ່ມຕົ້ນແລະການຢຸດເຊົາ
- To start the saw, first press the safety lock-off button (if present), then squeeze the trigger switch.
- To stop the saw, simply release the trigger switch. The blade will come to a stop.
2. ການເຮັດຕັດ
- Secure the workpiece firmly with clamps ເພື່ອປ້ອງກັນການເຄື່ອນໄຫວໃນລະຫວ່າງການຕັດ.
- Position the saw on the workpiece with the front of the base plate resting on the material. Ensure the blade is not touching the workpiece before starting the saw.
- ເລີ່ມເລື່ອຍ ແລະ ປ່ອຍໃຫ້ໃບມີດເຮັດວຽກໄດ້ເຕັມຄວາມໄວກ່ອນທີ່ຈະໃຊ້ງານກັບວັດສະດຸ.
- Slowly guide the saw through the workpiece, maintaining a steady, even pressure. Do not force the saw, as this can lead to kickback or damage to the tool/blade.
- After completing the cut, release the trigger switch and allow the blade to stop completely before lifting the saw from the workpiece.
3. ການດູດຝຸ່ນ
For a cleaner work environment and improved visibility, connect a suitable dust extraction system (e.g., a shop vacuum) to the dust extraction adapter on the saw.
ບໍາລຸງຮັກສາ
ທໍາຄວາມສະອາດ
Regularly clean the ventilation slots and the saw blade area to prevent dust buildup, which can affect performance and motor life. Use a soft brush or compressed air. Do not use water or solvents, as these can damage the tool's electrical components or plastic parts.
ການດູແລແຜ່ນໃບຄ້າຍຄື
Inspect the saw blade regularly for sharpness, cracks, or missing teeth. A dull or damaged blade can cause binding, kickback, and poor cut quality. Replace dull or damaged blades immediately with a suitable replacement blade (165mm diameter, 20mm arbor hole).
ການເກັບຮັກສາ
Store the saw in a dry, secure place, out of reach of children. Always remove the battery pack before storing the tool for extended periods.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Saw ບໍ່ເລີ່ມຕົ້ນ | Battery not charged or improperly installed; safety lock-off not engaged. | Charge battery, ensure proper installation, press safety lock-off before trigger. |
| Saw cuts slowly or binds | Dull or incorrect blade; incorrect cutting depth; forcing the saw; workpiece not secured. | Replace blade, adjust depth, reduce feed pressure, secure workpiece firmly. |
| ການສັ່ນສະເທືອນຫຼາຍເກີນໄປ | Damaged or unbalanced blade; loose components; worn bearings. | Inspect/replace blade, check for loose screws and tighten, contact service if bearings are suspected. |
| ຄຸນນະພາບການຕັດທີ່ບໍ່ດີ (ຂອບຫຍາບ, ມີຮອຍແຕກ) | Dull blade; incorrect blade type for material; too fast feed rate. | Replace blade, use appropriate blade for material, reduce feed rate. |
ຂໍ້ມູນຈໍາເພາະ
- ຕົວແບບ: Einhell TE-CS 18/165-1 Li-Solo
- ສະບັບtage: 18 V (Battery Operated)
- ຄວາມໄວບໍ່ມີການໂຫຼດ: 4,200 ນທ⁻¹
- ເສັ້ນຜ່າສູນກາງຂອງແຜ່ນໃບຄ້າຍຄື: 165 ມມ
- Arbor Hole Diameter: 20 ມມ
- ຄວາມເລິກຂອງການຕັດສູງສຸດ (90°): ປະມານ 54 ມມ
- ຄວາມເລິກຂອງການຕັດສູງສຸດ (45°): ປະມານ 35 ມມ
- ນ້ໍາຫນັກລາຍການ: 2.72 ກິໂລ (ບໍ່ມີຫມໍ້ໄຟ)
- ວັດສະດຸແຜ່ນ: ເຫຼັກຄວາມໄວສູງ
- ຈໍານວນແຂ້ວ: 24
- ຄຸນນະສົມບັດພິເສດ: ການດໍາເນີນງານໄຮ້ສາຍ
- ອົງປະກອບລວມ: Saw Blade
- ໝາຍເຫດ: Battery and charger are not included and must be purchased separately as part of the Einhell Power X-Change system.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This Einhell product comes with a limited warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Einhell website. For technical support, service, or to inquire about replacement parts, please contact Einhell customer service through their official channels.
