ANYCUBIC Wash and Cure 3.0 Station Instruction Manual

1. ບົດແນະນຳ

The ANYCUBIC Wash and Cure 3.0 is an upgraded 2-in-1 wash and cure station designed for resin 3D printer models. It features a larger cleaning capacity, innovative gooseneck lights for uniform curing, a dual-layer design for IPA saving, and quiet, simple operation. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

• Always wear protective gloves and eye protection when handling resin or cleaning solutions.
• Ensure adequate ventilation in your workspace to avoid inhaling resin fumes.
• ຮັກສາອຸປະກອນໃຫ້ຫ່າງຈາກເດັກນ້ອຍ ແລະສັດລ້ຽງ.
• ຢ່າໃຫ້ອຸປະກອນຖືກແສງແດດໂດຍກົງຫຼືອຸນຫະພູມສູງ.
• Use only recommended cleaning solutions (e.g., Isopropyl Alcohol - IPA) and follow their safety guidelines.
• Never operate the curing function without the UV-blocking top cover in place.
• ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະທໍາຄວາມສະອາດຫຼືດໍາເນີນການບໍາລຸງຮັກສາ.

3. ສິ່ງທີ່ຢູ່ໃນກ່ອງ

Upon unboxing your ANYCUBIC Wash and Cure 3.0, please verify that all components are present:

• Wash and Cure Machine Unit
• Washing Bucket (4L capacity)
• ຕູ້ເອກະສານລ້າງ
• Rack Bar (4 pcs)
• Curing Table
• Gooseneck Light
• ຊຸດກະແຈ Hex
• ຄູ່ມືຜູ້ໃຊ້
• Power Adapter

ຮູບທີ 3.1: All components included in the ANYCUBIC Wash and Cure 3.0 package.

4. ຄູ່ມືການຕິດຕັ້ງ

1. ແກະກ່ອງ: ເອົາສ່ວນປະກອບທັງຫມົດອອກຈາກການຫຸ້ມຫໍ່ຢ່າງລະມັດລະວັງ.
2. ການຈັດວາງ: Place the main unit on a stable, level surface in a well-ventilated area.
3. ການເຊື່ອມຕໍ່ພະລັງງານ: Connect the power adapter to the unit and then to a power outlet.
4. Gooseneck Light Installation: Insert the gooseneck light into its designated port on the main unit.
5. Washing Bucket Preparation:
   • For washing, place the washing basket inside the washing bucket.
   • Fill the washing bucket with your chosen cleaning solution (e.g., IPA) up to the appropriate level, ensuring it covers the models to be cleaned.
6. Curing Table Preparation: For curing, ensure the curing table is placed on the rotating platform.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1. Washing Mode

1. Prepare Models: Remove printed models from the build plate. For models still on the build plate, use the hanging cleaning mode. For detached models, place them in the washing basket.
2. Place Washing Bucket: Position the washing bucket with the models and cleaning solution onto the main unit's platform. Ensure the UV-blocking cover is in place.
3. ເລືອກໂໝດຊັກ: Press the "Wash" button on the control panel.
4. ຕັ້ງເວລາ: Use the rotary knob to set the desired washing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
5. ເລີ່ມການລ້າງ: Press the Start/Stop button to begin the washing cycle. The internal propeller will agitate the cleaning solution.
6. ສໍາເລັດ: The machine will beep when the cycle is complete. Carefully remove the models and allow them to dry.

ຮູບທີ 5.1: Dual cleaning modes for models on a build plate (hanging) or detached (basket).

5.2. Curing Mode

1. Place Models: After washing and drying, place the models on the curing table.
2. Position Curing Table: Place the curing table with models onto the main unit's rotating platform. Ensure the UV-blocking cover is in place.
3. Select Cure Mode: Press the "Cure" button on the control panel.
4. ຕັ້ງເວລາ: Use the rotary knob to set the desired curing time (typically 1-30 minutes, refer to resin manufacturer guidelines).
5. Activate Gooseneck Light (Optional): Press the "FlexiCure" button to activate the gooseneck light for targeted curing of complex areas.
6. ເລີ່ມ​ຕົ້ນ​ການ​ປິ່ນ​ປົວ​: Press the Start/Stop button to begin the curing cycle. The platform will rotate, and UV lights will activate.
7. ສໍາເລັດ: The machine will beep when the cycle is complete. Remove the fully cured models.

ຮູບທີ 5.2: The gooseneck light provides localized strengthening and uniform curing for intricate details on 3D models.

6. ບໍາລຸງຮັກສາ

• Cleaning the Washing Bucket: Regularly clean the washing bucket and basket to prevent resin buildup. Dispose of used cleaning solution responsibly according to local regulations.
• ທໍາ​ຄວາມ​ສະ​ອາດ​ຫນ່ວຍ​ບໍ​ລິ​ການ​: Wipe down the exterior of the unit with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• UV Light Maintenance: Keep the UV lights and gooseneck light clean and free of dust or resin residue to ensure optimal curing performance.
• ການເກັບຮັກສາ: When not in use, store the unit in a cool, dry place away from direct sunlight.

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

ຮູບທີ 8.1: Detailed comparison of Wash and Cure 3 and Wash and Cure 3 Plus specifications.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information, technical support, or service inquiries, please refer to the official ANYCUBIC webເວັບໄຊ ຫຼືຕິດຕໍ່ບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າໂດຍກົງ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.

ທ່ານສາມາດໄປຢ້ຽມຢາມໄດ້ ANYCUBIC Official Store ສໍາລັບຜະລິດຕະພັນເພີ່ມເຕີມແລະຊັບພະຍາກອນສະຫນັບສະຫນູນ.