LE Solar Outdoor Motion Sensor Light WL4000 Instruction Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.

ຮູບພາບ 1.1: ຫຼາຍກວ່າview of the LE Solar Outdoor Motion Sensor Light WL4000.

2. ຄຸນລັກສະນະຂອງຜະລິດຕະພັນ

• ມຸມແສງກວ້າງ: Features 3 adjustable heads providing 270° wide lighting coverage.
• ຄວາມສະຫວ່າງສູງ: Delivers 1000 lumens of 6500K daylight illumination.
• ການສາກໄຟແສງອາທິດທີ່ມີປະສິດທິພາບ: Converts sunlight into electricity, charging during the day for night operation.
• PIR Motion ເຊັນເຊີ: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
• ການ​ດໍາ​ເນີນ​ງານ​ອັດ​ຕະ​ໂນ​ມັດ​: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
• ທົນທານ ແລະກັນອາກາດ: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
• ການ​ຕິດ​ຕັ້ງ​ງ່າຍ​ດາຍ​: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.

Image 2.1: Product dimensions and adjustable light heads.

Image 2.2: The 270-degree wide lighting angle.

Image 2.3: Motion sensor detection range and angle.

3. ເນື້ອໃນຊຸດ

• LE Solar Outdoor Motion Sensor Light (WL4000)
• ຮາດແວຕິດຕັ້ງ (ສະກູ ແລະສະມໍຝາ)
• ຄູ່ມືຜູ້ໃຊ້

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Follow these steps for proper installation of your solar light:

1. ເລືອກສະຖານທີ່: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
2. ຕິດຕັ້ງ Lamp ຜູ້ຖື: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
3. ເປີດໃຊ້ແສງ: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
4. ວາງສາຍ: Carefully hang the solar light unit onto the installed lamp ຜູ້ຖື.
5. ປັບ​ຫົວ​ແສງ​: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.

Image 4.1: Step-by-step installation process.

Image 4.2: Fixing the lamp ຜູ້ຖືດ້ວຍ screws.

Image 4.3: Activating the light using the mode switch.

Image 4.4: Hanging the light onto the lamp ຜູ້ຖື.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.

• ການ​ດໍາ​ເນີນ​ງານ​ໃນ​ຕອນ​ກາງ​ຄືນ​: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
• ການ​ດໍາ​ເນີນ​ງານ​ໃນ​ຕອນ​ກາງ​ຄືນ​: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
• ປິດອັດຕະໂນມັດ: The light will automatically turn off approximately 20 seconds after no further motion is detected.

Image 5.1: Solar charging and motion-activated lighting cycle.

6. ບໍາລຸງຮັກສາ

To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:

• ເຮັດຄວາມສະອາດກະດານແສງອາທິດ: ເຊັດແຜງໂຊລາເຊວຢ່າງເປັນປົກກະຕິດ້ວຍການອ່ອນ, ງamp ຜ້າເພື່ອເອົາຝຸ່ນ, ຝຸ່ນ, ແລະສິ່ງເສດເຫຼືອ. ແຜງທີ່ສະອາດຮັບປະກັນການດູດຊຶມແສງແດດຢ່າງມີປະສິດທິພາບແລະການສາກໄຟ.
• ສິ່ງກີດຂວາງທີ່ຈະແຈ້ງ: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
• ກວດ​ສອບ​ການ​ເສຍ​ຫາຍ​: Periodically check the light for any physical damage, loose connections, or signs of wear.
• ຄວາມຕ້ານທານສະພາບອາກາດ: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.

Image 6.1: IP65 waterproof, heat, and frost resistance features.

7. ການແກ້ໄຂບັນຫາ

If your solar light is not functioning as expected, consider the following common issues and solutions:

• ແສງບໍ່ເປີດໃນຕອນກາງຄືນ:
  • ໃຫ້ແນ່ໃຈວ່າສະວິດໄຟຢູ່ໃນຕໍາແຫນ່ງເປີດ.
  • Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
  • Check if the solar panel is dirty or obstructed. Clean it thoroughly.
  • Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
• Light stays on for a short period or is dim:
  • Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
  • The battery may not be fully charged. Ensure optimal sun exposure.
• Motion sensor is not detecting:
  • ໃຫ້ແນ່ໃຈວ່າເຊັນເຊີບໍ່ໄດ້ຂັດຂວາງ.
  • Verify the light is installed within the recommended height range (1.5-3.5 meters).
  • Test the sensor by walking within its detection range.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.