ຄູ່ມືການໃຊ້ເຄື່ອງສັງເຄາະສຽງເບສແບບອະນາລັອກ Behringer TD-3-SR

1. ບົດແນະນຳ

This manual provides detailed instructions for the setup, operation, and maintenance of your Behringer TD-3-SR Analog Bass Line Synthesizer. Please read this manual thoroughly to ensure proper use and to fully explore the capabilities of your instrument. Keep this manual for future reference.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

• ການສະຫນອງພະລັງງານ: ໃຊ້ພຽງແຕ່ອະແດັບເຕີພະລັງງານທີ່ລະບຸໄວ້. ຮັບປະກັນ voltage ກົງກັບຄວາມຕ້ອງການຂອງພາກພື້ນຂອງທ່ານ.
• ນ​້​ໍ​າ​ແລະ​ຄວາມ​ຊຸ່ມ​: ຢ່າໃຫ້ເຄື່ອງຖືກຝົນ, ຄວາມຊຸ່ມຊື່ນ, ຫຼື ຂອງແຫຼວໃດໆ. ຫຼີກລ່ຽງການວາງວັດຖຸທີ່ເຕັມໄປດ້ວຍຂອງແຫຼວໄວ້ເທິງເຄື່ອງ.
• ການລະບາຍອາກາດ: ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍ. ຫ້າມປິດຊ່ອງລະບາຍອາກາດ.
• ຄວາມຮ້ອນ: ຫ້າມວາງຢູ່ໃກ້ກັບແຫຼ່ງຄວາມຮ້ອນເຊັ່ນ: ລັງສີ, ເຄື່ອງບັນທຶກຄວາມຮ້ອນ, ເຕົາ ຫຼືອຸປະກອນອື່ນໆ (ລວມທັງ. amplifiers) ທີ່ຜະລິດຄວາມຮ້ອນ.
• ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດດ້ວຍຜ້າແຫ້ງເທົ່ານັ້ນ.
• ການບໍລິການ: ຢ່າພະຍາຍາມບໍລິການຜະລິດຕະພັນນີ້ດ້ວຍຕົນເອງ. ອ້າງເຖິງການບໍລິການທັງtoົດໃຫ້ກັບພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ທີ່​ລະ​ບຸ​ໄວ້​ຂ້າງ​ລຸ່ມ​ນີ້​ແມ່ນ​ລວມ​ຢູ່​ໃນ​ຊຸດ​ຂອງ​ທ່ານ​:

• Behringer TD-3-SR Analog Bass Line Synthesizer
• Power Adapter
• ສາຍ USB
• ຄູ່ມືເລີ່ມຕົ້ນດ່ວນ

4. ຜະລິດຕະພັນເກີນview

4.1 ແຜງຄວບຄຸມດ້ານໜ້າ

ຮູບທີ 4.1: The Behringer TD-3-SR Analog Bass Line Synthesizer, showing the complete front panel with all controls and buttons.

The front panel of the TD-3-SR is organized into several sections for intuitive control over sound generation and sequencing:

• ພາກສ່ວນ VCO: Controls for the Voltage Controlled Oscillator, including ປບັ ແລະ WAVEFORM (Sawtooth/Square).
• ພາກສ່ວນ VCF: Controls for the Voltage Controlled Filter, featuring ຕັດ, ຄວາມຮັບຜິດຊອບ, ບໍລິສັດຜະລິດໄຟຟ້າ ENVachinE, ເສື່ອມໂຊມ, ແລະ ACCENT.
• Sequencer Controls: Buttons and switches for pattern programming and playback, including TEMPO, ກຸ່ມຕິດຕາມ / PATTERN, ໂໝດ (Play/Write), ແບບ PITCH, ຟັງຊັນ, ເລີ່ມ/ຢຸດ, ບາ, ຕົວເລືອກ, DEL, INS, CH, ສຳເນົາ, ວາງ, ຂັ້ນຕອນ buttons (1-8, 0, 100, 200), ACCENT, ສະໄລ້, ແລະ Sync.
• Distortion Section: An integrated distortion effect with an ເປີດ/ປິດ ສະຫຼັບ, ໂທນ, ແລະ ລະດັບ ຄວບຄຸມ.
• ການຄວບຄຸມລະດັບສຽງ: A master ປະລິມານ knob for output level adjustment.

ຮູບທີ 4.2: ໃກ້ຊິດ view of the Distortion and Volume sections on the Behringer TD-3-SR, highlighting the ON/OFF switch, TONE, LEVEL, and master VOLUME controls.

4.2 ການເຊື່ອມຕໍ່ແຜງດ້ານຫລັງ

ຮູບທີ 4.3: The rear panel of the Behringer TD-3-SR, displaying all input and output connections for audio, MIDI, USB, and power.

The rear panel provides essential connectivity for integrating the TD-3-SR into your studio or live setup:

• Sync ໃນ: 3.5mm input for external clock synchronization.
• CV ອອກ: 3.5mm output for controlling external analog gear with control voltage.
• ປະຕູອອກ: 3.5mm output for sending gate signals to external analog gear.
• ໂທລະສັບ: ຜົນຜະລິດສະເຕີລິໂອ 3.5mm ສໍາລັບຫູຟັງ.
• ຂາອອກ: 1/4" mono output for connecting to mixers, audio interfaces, or ampຜູ້ຊ່ວຍຊີວິດ.
• MIDI ເຂົ້າ/ອອກ/ຜ່ານ: 5-pin DIN connectors for MIDI communication with other devices.
• USB: USB-B port for MIDI over USB and firmware updates.
• POWER DC INPUT: Connection for the included power adapter (9V DC, 300mA).

5. ຕັ້ງຄ່າ

1. ການເຊື່ອມຕໍ່ພະລັງງານ: ເຊື່ອມຕໍ່ອະແດບເຕີພະລັງງານທີ່ລວມເຂົ້າກັບ ການປ້ອນຂໍ້ມູນພະລັງງານ DC on the rear panel and then to a suitable power outlet.
2. ການເຊື່ອມຕໍ່ສຽງ: ເຊື່ອມ​ຕໍ່ ອອກ jack to your mixer, audio interface, or amplifier using a 1/4" TS cable. For private monitoring, connect headphones to the ໂທລະສັບ jack.
3. ການເຊື່ອມຕໍ່ MIDI/USB (ທາງເລືອກ): If integrating with other MIDI devices, connect MIDI cables to the MIDI IN/OUT/THRU ports. For computer connectivity, use the supplied USB cable to connect the USB port to your computer.
4. ເປີດ: Ensure all connections are secure, then flip the power switch located next to the DC input to the 'ON' position.

6. ການດໍາເນີນງານພື້ນຖານ

6.1 Generating a Basic Sound

1. Turn the master ປະລິມານ knob to a low setting.
2. ກໍານົດ ໂໝດ switch to 'PLAY'.
3. ກົດ ເລີ່ມ/ຢຸດ button to begin playback of a default pattern.
4. ປັບ ປບັ knob in the VCO section to change the pitch.
5. ເລືອກ ກ WAVEFORM (Sawtooth or Square) using the switch in the VCO section.
6. Experiment with the VCF controls: ຕັດ (filter frequency), ຄວາມຮັບຜິດຊອບ (filter emphasis), ບໍລິສັດຜະລິດໄຟຟ້າ ENVachinE (filter modulation depth), ເສື່ອມໂຊມ (envelope decay time), and ACCENT (accent level).
7. Adjust the master ປະລິມານ ໃນລະດັບການຟັງທີ່ສະດວກສະບາຍ.

6.2 Using the Distortion Effect

ຮູບທີ 6.1: The Distortion section, showing the ON/OFF switch and TONE/LEVEL knobs.

The TD-3-SR includes a built-in distortion effect to add grit and character to your bass lines.

1. To activate the distortion, set the ການບິດເບືອນ switch to 'ON'.
2. ປັບ ໂທນ knob to shape the frequency content of the distorted sound.
3. ໃຊ້ ລະດັບ knob to control the intensity of the distortion effect.

7. Sequencer Operation

ຮູບທີ 7.1: Close-up of the sequencer section, showing step buttons, function buttons, and pattern group selector.

The TD-3-SR features a 16-step sequencer for creating and playing bass lines.

7.1 Selecting a Pattern Group

• ໃຊ້ ກຸ່ມຕິດຕາມ / PATTERN rotary switch to select one of the four available pattern groups (I, II, III, IV). Each group contains multiple patterns.

7.2 Entering Write Mode

• To program a pattern, set the ໂໝດ switch to 'WRITE'. The unit will stop playback if it was running.

7.3 Step Entry

1. In 'WRITE' mode, press the ຂັ້ນຕອນ buttons (1-8) to enter notes. Each press advances the sequencer to the next step.
2. ໃຊ້ DEL button to delete the note at the current step.
3. ໃຊ້ INS button to insert a step before the current step.
4. ເພື່ອເພີ່ມ ACCENT or ສະໄລ້ to a step, press the corresponding button while the step is active or immediately after entering a note.

7.4 Playing Patterns

1. ກໍານົດ ໂໝດ switch to 'PLAY'.
2. ກົດ ເລີ່ມ/ຢຸດ button to begin playback of the selected pattern.
3. ປັບ TEMPO knob to change the playback speed.
4. ໄດ້ Sync switch allows internal or external clock synchronization.

8. MIDI ແລະການເຊື່ອມຕໍ່ USB

The TD-3-SR offers comprehensive MIDI and USB connectivity for integration with other musical equipment and computers.

• MIDI ໃນ: Receives MIDI data for controlling the TD-3-SR's notes, parameters, and clock.
• MIDI OUT: Transmits MIDI data generated by the TD-3-SR, including sequencer patterns and knob movements.
• MIDI THRU: Passes through incoming MIDI data from the MIDI IN port to another device.
• USB MIDI: Connect the TD-3-SR to a computer via the USB-B port. This allows for MIDI control from a Digital Audio Workstation (DAW) and enables firmware updates. The TD-3-SR will appear as a standard MIDI device on your computer.

9. ບໍາລຸງຮັກສາ

• ທໍາຄວາມສະອາດ: Use a soft, dry, lint-free cloth to clean the exterior of the unit. Do not use abrasive cleaners, solvents, or waxes.
• ການເກັບຮັກສາ: When not in use for extended periods, store the TD-3-SR in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
• ການອັບເດດເຟີມແວ: ກວດເບິ່ງ Behringer ເປັນໄລຍະ webເວັບໄຊທ໌ສຳລັບການອັບເດດເຟີມແວທີ່ມີຢູ່ເພື່ອຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ການເຂົ້າເຖິງຄຸນສົມບັດໃໝ່ໆ.

10. ການແກ້ໄຂບັນຫາ

• ບໍ່ມີສຽງອອກ:
  • ກວດສອບການເຊື່ອມຕໍ່ພະລັງງານ ແລະ ຮັບປະກັນວ່າເຄື່ອງໄດ້ເປີດຢູ່.
  • Verify audio cables are correctly connected to the ອອກ and your audio system.
  • Ensure the master ປະລິມານ ປຸ່ມຖືກຫມຸນຂຶ້ນ.
  • If using headphones, check the headphone connection and volume.
  • Ensure a pattern is playing and the ໂໝດ switch is set to 'PLAY'.
• Sequencer Not Playing/Responding:
  • ກວດເບິ່ງວ່າ ໂໝດ switch is set to 'PLAY'.
  • ຮັບປະກັນ ເລີ່ມ/ຢຸດ ປຸ່ມໄດ້ຖືກກົດ.
  • If using external sync, verify the external clock source is active and the Sync ສະວິດຖືກຕັ້ງຢ່າງຖືກຕ້ອງ.
• ບັນຫາການຄວບຄຸມ MIDI:
  • Verify MIDI cables are securely connected to the correct MIDI IN / OUT ທ່າເຮືອ.
  • Check MIDI channel settings on both the TD-3-SR and the controlling device.
  • If using USB MIDI, ensure the USB cable is connected and the TD-3-SR is recognized by your computer/DAW.

11. ຂໍ້ມູນຈໍາເພາະ

12. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Behringer products are designed for reliability and performance. This product is covered by a limited warranty. For detailed warranty terms and conditions, product registration, and technical support, please visit the official Behringer webສະຖານທີ່ຫຼືຕິດຕໍ່ຜູ້ຈັດຈໍາຫນ່າຍທ້ອງຖິ່ນຂອງທ່ານ. ຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮ້ອງຂໍການຮັບປະກັນ.