YuanLey YS082G-P 10-Port PoE Switch User Manual

1. ບົດແນະນຳ

This manual provides detailed instructions for the YuanLey YS082G-P 10-Port PoE Switch. This unmanaged network switch is designed for various applications, offering 8 Power over Ethernet (PoE+) ports and 2 Gigabit uplink ports for efficient network connectivity and power delivery.

ຮູບພາບ 1.1: ດ້ານຫນ້າ view of the YuanLey YS082G-P 10-Port PoE Switch.

2. ຄຸນນະສົມບັດທີ່ສໍາຄັນ

• ການຕັ້ງຄ່າພອດ: Features 8 PoE ports (10/100Mbps) and 2 Gigabit uplink Ethernet ports (1000Mbps) for high-bandwidth connections.
• ເປີດໄຟຜ່ານອີເທີເນັດ (PoE+): Supports IEEE 802.3af/at standards with a maximum total power budget of 120W, delivering up to 30W per port.
• ສຽບ ແລະ ຫຼິ້ນ: Unmanaged switch design allows for automatic device detection and requires no configuration for easy setup.
• ຂະຫຍາຍຟັງຊັນ: Enables single PoE ports to support transmission distances up to 250m at 10Mbps when activated.
• ຮອງຮັບ VLAN: Ports 1-8 support VLAN isolation to reduce network congestion and enhance security.
• ການອອກແບບທົນທານ: Constructed with a metal case for bilateral heat dissipation, fanless operation for quiet performance, and 4KV lightning protection.
• ອຸນຫະພູມການດໍາເນີນງານກວ້າງ: Designed to operate reliably in environments ranging from -10°C to +55°C.

Image 2.1: Port configuration showing 8 PoE ports (10/100Mbps) and 2 Gigabit uplink ports (1000Mbps).

Image 2.2: Diagram illustrating the One Key VLAN function, isolating ports 1-8 while allowing communication with uplink ports.

Image 2.3: Comparison of Extend Mode (250m, 10Mbps) and Default Mode (100m, 100Mbps) for PoE transmission.

ຮູບພາບ 2.4: ຫຼາຍກວ່າview of the switch's unmanaged features including metal case, plug and play, 4KV lightning protection, and 12 Gbps switching capacity.

Image 2.5: Illustration of the switch's fanless design and wide operating temperature range (-10°C to +55°C).

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​:

• YuanLey YS082G-P 10-Port PoE Switch
• ສາຍໄຟ
• Mounting Brackets (for rackmount or wall mount)
• screws ສໍາລັບ mounting
• ຄູ່ມືເລີ່ມຕົ້ນດ່ວນ

4. ຄໍາແນະນໍາການຕິດຕັ້ງ

The YuanLey YS082G-P is a plug-and-play unmanaged switch, requiring minimal setup.

1. ເຊື່ອມຕໍ່ພະລັງງານ: Plug the provided power cord into the AC IN port on the back of the switch and then into a standard electrical outlet. The Power LED on the front panel should illuminate.
2. ເຊື່ອມຕໍ່ Uplink: Connect your router or main network device to one of the two Gigabit uplink ports (ports 9 or 10) using a standard Ethernet cable.
3. ເຊື່ອມຕໍ່ອຸປະກອນ PoE: Connect your PoE-compatible devices (e.g., IP cameras, wireless access points, IP phones) to any of the 8 PoE ports (ports 1-8) using Ethernet cables. The switch will automatically detect and power these devices.
4. ການຕິດຕັ້ງ (ທາງເລືອກ): Use the included mounting brackets and screws to install the switch in a 19-inch rack or mount it on a wall.

Image 4.2: Visual guide for the simple plug-and-play setup process: Connect to Power, Connect Devices, and Enjoy.

Image 4.3: Illustration of the rackmount design and included brackets for installation.

5. ຮູບແບບການເຮັດວຽກ

The switch features a mode switch on the front panel to select between Default and Extend modes.

• ໂໝດເລີ່ມຕົ້ນ: In this mode, all ports operate at their standard speeds (10/100Mbps for PoE ports, 1000Mbps for uplink ports) with a maximum transmission distance of 100 meters.
• ຂະຫຍາຍໂໝດ: When the switch is set to Extend mode, PoE ports 1-8 can transmit data and power up to 250 meters, but the speed for these ports will be reduced to 10Mbps. This mode is ideal for long-distance deployments of devices like IP cameras where higher bandwidth is not critical.
• VLAN Functionality: The switch supports VLAN isolation on ports 1-8. When enabled, these ports are isolated from each other but can still communicate with the uplink ports (9-10). This helps in segmenting the network, reducing broadcast storms, and improving overall network security and performance.

Image 5.1: The physical switch for selecting between Default and Extend modes.

Image 5.2: Diagram illustrating the functionality of One Key VLAN and the Extend mode for longer PoE distances.

6. ບໍາລຸງຮັກສາ

To ensure optimal performance and longevity of your YuanLey PoE Switch:

• Keep the device in a well-ventilated area to prevent overheating. The fanless design relies on natural convection.
• Regularly inspect cables for damage and ensure secure connections.
• Clean the exterior of the switch with a soft, dry cloth. Avoid using liquid cleaners or aerosols.
• ຮັບປະກັນວ່າແຫຼ່ງພະລັງງານມີຄວາມໝັ້ນຄົງ ແລະ ຢູ່ໃນລະດັບແຮງດັນທີ່ກຳນົດໄວ້tage ຊ່ວງ (AC 100-240V).

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For any questions, technical assistance, or warranty inquiries, please contact YuanLey official support. Refer to the product packaging or the official YuanLey webເວັບໄຊສໍາລັບຂໍ້ມູນຕິດຕໍ່ໃນປະຈຸບັນຫຼາຍທີ່ສຸດ.