ຄູ່ມືຜູ້ໃຊ້ FUSION FM-S10SB Marine Subwoofer

ແນະນຳ

Thank you for choosing the FUSION FM-S10SB Flush Mount Marine Subwoofer. This 10-inch, 400W subwoofer is engineered for marine environments, featuring a square grille, sealed water-resistant construction, and a polypropylene cone with a rubber surround. It is designed to deliver high-quality bass while withstanding harsh marine conditions, meeting IP65 water and dust resistance standards and complying with ASTM standards for UV stability and salt/fog resistance.

This manual provides essential information for the safe and effective installation, operation, and maintenance of your FUSION marine subwoofer. Please read it thoroughly before installation and keep it for future reference.

ຂໍ້ມູນຄວາມປອດໄພ

Always observe the following safety precautions to prevent injury or damage to the product and vessel:

• ການຕັດການເຊື່ອມຕໍ່ໄຟຟ້າ: Disconnect the vessel's power supply before beginning any installation or wiring.
• ສາຍໄຟທີ່ຖືກຕ້ອງ: Ensure all wiring is correctly connected and insulated to prevent short circuits and electrical hazards. Refer to the wiring diagram in the installation section.
• ການລະບາຍອາກາດ: ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍຮອບຕົວເຄື່ອງຍ່ອຍເພື່ອປ້ອງກັນຄວາມຮ້ອນເກີນ.
• ສະຖານທີ່ຕິດຕັ້ງ: Choose a stable and secure mounting location that can support the weight of the subwoofer and is free from obstructions.
• ການເປີດເຜີຍນ້ໍາ: While the subwoofer is water-resistant (IP65 rated), avoid direct high-pressure water jets or submersion.
• ການຕິດຕັ້ງແບບມືອາຊີບ: If you are unsure about any aspect of the installation, consult a qualified marine electronics installer.
• ລະດັບສຽງ: ການສໍາຜັດກັບລະດັບສຽງສູງເປັນເວລາດົນນານສາມາດເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍຕໍ່ການໄດ້ຍິນ.

ຂໍ້ສະເໜີ 65 ຄຳເຕືອນ: ຜະລິດຕະພັນນີ້ສາມາດເຮັດໃຫ້ທ່ານມີສານເຄມີທີ່ຮູ້ກັນໃນລັດຄາລິຟໍເນຍເພື່ອເຮັດໃຫ້ເກີດມະເຮັງແລະຄວາມຜິດປົກກະຕິການເກີດລູກຫຼືເປັນອັນຕະລາຍຕໍ່ການຈະເລີນພັນອື່ນໆ. ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມໄປທີ່ www.P65 ຂໍ້ຄວນລະວັງ.

ແມ່ນຫຍັງຢູ່ໃນກ່ອງ

ກວດ​ສອບ​ວ່າ​ອົງ​ປະ​ກອບ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ກ່ອນ​ທີ່​ຈະ​ເລີ່ມ​ຕົ້ນ​ການ​ຕິດ​ຕັ້ງ​:

• FUSION FM-S10SB Flush Mount Marine Subwoofer
• Installation Material (screws, mounting template if applicable)
• ເອກະສານຄໍາແນະນໍາ (ຄູ່ມືນີ້)

ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

Proper installation is crucial for optimal performance and longevity of your subwoofer. Follow these steps carefully:

1. ການເລືອກສະຖານທີ່ຕິດຕັ້ງ

Select a flat, stable surface on your vessel that can accommodate the subwoofer's dimensions (9.84 x 5.51 x 5.04 inches) and provide sufficient clearance behind for wiring and air circulation. The subwoofer is designed for flush mounting.

2. ການກະກຽມພື້ນຜິວຕິດຕັ້ງ

1. Using the provided mounting template (if included), mark the cutout area on the chosen surface.
2. Carefully cut the opening using appropriate tools. Ensure the cut is clean and precise to allow for a snug fit.
3. Drill pilot holes for the mounting screws as indicated by the template.

3. Wiring the Subwoofer

The FM-S10SB features a dual 2-ohm voice coil. Ensure your amplifier is compatible with this impedance. Proper wiring is essential for sound quality and to prevent damage to the subwoofer or ampມີຊີວິດຊີວາ.

• ສາຍໄຟຂະໜານ (1 ໂອມ): Connect the positive terminals of both voice coils together, and the negative terminals of both voice coils together. Connect the combined positive to the ampຜົນ​ຜະ​ລິດ​ທາງ​ບວກ​ຂອງ lifier ແລະ​ລົບ​ລວມ​ກັບ​ການ​ amplifier's negative output. This configuration presents a 1-ohm load.
• ຊຸດສາຍໄຟ (4 Ohms): ເຊື່ອມຕໍ່ຂົ້ວບວກຂອງປ່ຽງສຽງໜຶ່ງກັບປ້ຳລົບຂອງປ່ຽງສຽງອື່ນ. ເຊື່ອມຕໍ່ສະຖານີບວກທີ່ຍັງເຫຼືອກັບ ampຜົນ​ຜະ​ລິດ​ທາງ​ບວກ​ຂອງ lifier ແລະ​ປາຍ​ທາງ​ລົບ​ທີ່​ຍັງ​ເຫຼືອ​ທີ່​ຈະ​ໄດ້​ amplifier's negative output. This configuration presents a 4-ohm load.

Use marine-grade wiring of appropriate gauge for your power requirements. Ensure all connections are secure and protected from moisture.

4. ການຕິດຕັ້ງ Subwoofer

1. Carefully insert the subwoofer into the prepared cutout.
2. Secure the subwoofer using the provided mounting screws. Do not overtighten, as this can damage the mounting flange.
3. Ensure the grille is properly aligned and seated.

ຮູບພາບ: ທາງຫນ້າ view of the FUSION FM-S10SB Marine Subwoofer, showcasing its black square grille and flush-mount design. The grille features a dense pattern of small circular perforations for sound output and protection.

ປະຕິບັດການ Subwoofer ໄດ້

The FUSION FM-S10SB subwoofer is a passive component and requires an external amplifier to operate. Once installed and wired correctly, its operation is controlled by your marine audio system's head unit and ampການ​ຕັ້ງ​ຄ່າ lifier​.

• Ampການ​ຕັ້ງ​ຄ່າ lifier​: Adjust the gain, crossover frequency (low-pass filter), and phase settings on your amplifier to optimize the subwoofer's performance with your main speakers. A typical low-pass crossover setting for a subwoofer is between 60Hz and 100Hz.
• ການຄວບຄຸມລະດັບສຽງ: Control the overall system volume through your head unit. Avoid pushing the subwoofer to distortion, which can cause damage.
• ໄລ​ຍະ​ເວ​ລາ​ທີ່​ແຕກ​ຕ່າງ​ກັນ​: Allow a short break-in period (approximately 10-20 hours of normal use) for the subwoofer's suspension to loosen, which can improve its long-term performance.

ບໍາລຸງຮັກສາ

To ensure the longevity and optimal performance of your FUSION marine subwoofer, follow these maintenance guidelines:

• ທໍາຄວາມສະອາດ: Regularly wipe down the grille and surrounding surfaces with a soft, damp ຜ້າ. ສຳລັບຝຸ່ນທີ່ຝັງແໜ້ນ, ໃຫ້ໃຊ້ນ້ຳຢາສະບູອ່ອນໆ ແລະ ລ້າງອອກໃຫ້ສະອາດດ້ວຍນ້ຳສະອາດ. ຫຼີກລ່ຽງນ້ຳຢາທຳຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ.
• ການກວດກາ: Periodically inspect the subwoofer for any signs of wear, corrosion, or damage to the cone, surround, or grille. Check wiring connections for tightness and corrosion.
• ການປົກປ້ອງ UV: While the grille is UV-resistant, prolonged exposure to direct sunlight can still affect its appearance over time. Consider using a cover when the vessel is not in use for extended periods.
• ລະດູໜາວ: If storing your vessel in freezing temperatures, ensure the subwoofer is protected from extreme cold and moisture.

ການແກ້ໄຂບັນຫາ

If you experience issues with your FUSION FM-S10SB subwoofer, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, contact Fusion customer support or a qualified service technician.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ຂໍ້ມູນການຮັບປະກັນ: Your FUSION FM-S10SB Marine Subwoofer comes with a Full Warranty. Please refer to the warranty card included with your product or visit the official Fusion webສະຖານທີ່ສໍາລັບຂໍ້ກໍານົດແລະເງື່ອນໄຂລະອຽດກ່ຽວກັບການຄຸ້ມຄອງການຮັບປະກັນ, ໄລຍະເວລາ, ແລະຂັ້ນຕອນການຮຽກຮ້ອງ.

ການຊ່ວຍເຫຼືອລູກຄ້າ: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Fusion customer support. Contact information can typically be found on the Fusion webສະຖານທີ່ຫຼືຢູ່ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ.

ຊັບພະຍາກອນອອນໄລນ໌: ຢ້ຽມຊົມ Fusion ຢ່າງເປັນທາງການ website for the latest product information, FAQs, and additional support resources.