AKO 372920

AKO Sun Power S 250 Solar Fence Energizer

ຄູ່ມືຜູ້ໃຊ້

ແນະນຳ

The AKO Sun Power S 250 is a highly efficient, compact solar fence energizer designed for reliable operation in various agricultural settings. This device is ideal for managing paddocks and small fences, particularly those without dense vegetation, ensuring the safety and containment of your animals.

Equipped with intelligent battery management, the Sun Power S 250 offers extended autonomy, capable of operating for up to two weeks without direct sunlight. It also features deep discharge protection, indicated by a red flashing light when battery voltage drops below 11.2 V, safeguarding the battery's lifespan.

AKO Sun Power S 250 Solar Fence Energizer front view

ຮູບ 1: ດ້ານຫນ້າ view of the AKO Sun Power S 250 Solar Fence Energizer, showcasing its integrated solar panel and robust green casing.

ຕັ້ງຄ່າ

Proper setup is crucial for the optimal performance of your AKO Sun Power S 250. Follow these steps to ensure effective operation:

  1. ການຈັດວາງ: Choose a location for the energizer that receives maximum direct sunlight throughout the day. Avoid shaded areas from trees, buildings, or dense vegetation. The solar panel should face south (in the Northern Hemisphere) for best results.
  2. ການຕິດຕັ້ງ: The energizer can be mounted on a fence post or a dedicated stand. Ensure it is securely fastened to prevent movement or damage from wind or animals.
  3. ການຕໍ່ດິນ: Connect the energizer's ground terminal (usually marked with a ground symbol or "EARTH") to a suitable ground rod. The ground rod should be driven deep into moist soil, away from other electrical grounds. A good ground system is essential for effective fence performance.
  4. ການເຊື່ອມຕໍ່ຮົ້ວ: Connect the energizer's fence terminal (usually marked with a lightning bolt or "FENCE") to your electric fence line. Use insulated wire designed for electric fences to prevent energy loss.
  5. ການເຊື່ອມຕໍ່ຫມໍ້ໄຟ: Ensure the internal 12V battery is properly connected. The intelligent battery management system will optimize charging from the solar panel.
AKO Sun Power S 250 mounted on a fence post with horses in the background

Figure 2: The AKO Sun Power S 250 installed on a wooden fence post, demonstrating its use in a pasture with horses. The solar panel is clearly visible, positioned to capture sunlight.

AKO Sun Power S 250 mounted on a fence post with electric fence tape

ຮູບທີ 3: A ໃກ້ຊິດ view of the AKO Sun Power S 250 attached to a fence post, with white electric fence tape extending from it. This illustrates a typical installation scenario for small fences.

ຄໍາແນະນໍາການດໍາເນີນງານ

Once properly set up, the AKO Sun Power S 250 operates largely autonomously. Here are key operational aspects:

ຫລັງ view of AKO Sun Power S 250 showing battery compartment and terminals

ຮູບ 4: ດ້ານຫລັງ view of the AKO Sun Power S 250, showing the battery compartment, power switch, and connection terminals for fence and ground wires. This view is essential for understanding wiring and controls.

ບໍາລຸງຮັກສາ

Regular maintenance ensures the longevity and efficiency of your solar fence energizer:

ການແກ້ໄຂບັນຫາ

If your AKO Sun Power S 250 is not performing as expected, consider the following common issues and solutions:

ບັນຫາສາເຫດທີ່ເປັນໄປໄດ້ການແກ້ໄຂ
No fence pulse / Weak pulse
  • ຫມໍ້ໄຟຕ່ໍາ voltage
  • ດິນບໍ່ດີ
  • Fence shorting out (vegetation, broken insulators)
  • ການເຊື່ອມຕໍ່ວ່າງ
  • Ensure solar panel is clean and receiving direct sunlight. Allow time for battery to charge.
  • Check ground rod connection and ensure it's in moist soil. Add more ground rods if necessary.
  • Inspect fence line for vegetation touching wires or damaged insulators. Clear vegetation and repair insulators.
  • Tighten all connections at the energizer and along the fence line.
Red light flashing (low battery indicator)
  • ແສງແດດບໍ່ພຽງພໍສຳລັບການສາກໄຟ
  • Excessive fence load (short circuit)
  • ແບັດເຕີຣີໃກ້ຈະໝົດອາຍຸແລ້ວ
  • Relocate energizer to a sunnier spot or clear obstructions.
  • Check fence for shorts.
  • Consider replacing the 12V battery if it no longer holds a charge.
Energizer not turning on
  • ປິດພະລັງງານຖືກປິດແລ້ວ
  • ແບັດເຕີຣີໝົດແລ້ວ
  • ຄວາມຜິດພາຍໃນ
  • ໃຫ້ແນ່ໃຈວ່າສະວິດໄຟຢູ່ໃນຕຳແໜ່ງ "ເປີດ".
  • Allow unit to charge in direct sunlight for at least 24-48 hours.
  • If issues persist after charging and checking connections, contact customer support.

ຂໍ້ມູນຈໍາເພາະ

ຄຸນສົມບັດລາຍລະອຽດ
ໝາຍເລກຕົວແບບ372920
ຍີ່ຫໍ້AKO
ແຫຼ່ງພະລັງງານ12V Solar Powered
Maximum Fence Length (without vegetation)ເຖິງ 3 ກິໂລແມັດ
ການຄຸ້ມຄອງຫມໍ້ໄຟIntelligent battery management with deep discharge protection
ຕົວຊີ້ວັດແບັດເຕີຣີຕໍ່າRed flashing light at <11.2 V
ຂະໜາດແພັກເກັດ31 x 25 x 17 cm
ນ້ໍາຫນັກລາຍການ3.91 ກິ​ໂລກ​ຣາມ
ຜູ້ຜະລິດAlbert Kerbl GmbH

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For specific warranty details and customer support, please refer to the documentation provided with your purchase or visit the official AKO website. Warranty terms typically cover manufacturing defects and vary by region and retailer.

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact AKO customer service or your authorized dealer. Keep your purchase receipt and model number (372920) handy when contacting support.

Note: Information regarding spare parts availability was not provided in the product data. Please consult the manufacturer for details.

ເອກະສານທີ່ກ່ຽວຂ້ອງ - 372920

ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ AKO-55624 ແລະ AKO-55724
ຄູ່​ມື​ການ​ນໍາ​ໃຊ້​ທີ່​ສົມ​ບູນ​ແບບ​ສໍາ​ລັບ AKO Gas Leak Detection ລະ​ບົບ​ເຕືອນ​ໄພ​, ກວມ​ເອົາ AKO-55624 ແລະ AKO-55724​. ປະກອບມີລາຍລະອຽດອຸປະກອນ, ການຕິດຕັ້ງ, ການຕັ້ງຄ່າ, ການດໍາເນີນງານ, ຂໍ້ມູນສະເພາະດ້ານວິຊາການ, ແລະອຸປະກອນເສີມ.
ກ່ອນview ຄູ່ມືການໃຊ້ Usuario Transmisor de Gas V3 AKO-575xxx
ຄູ່ມື de usuario detallado para el Transmisor de Gas V3 AKO-575xxx de AKO Electromecánica. Cubre instalación, funcionamiento, configuración, mantenimiento, especificaciones técnicas y accesorios.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງສົ່ງອາຍແກັສ AKO-575xxx
ຄູ່ມືຜູ້ໃຊ້ທີ່ຄົບຖ້ວນສຳລັບເຄື່ອງສົ່ງສັນຍານອາຍແກັສ AKO-575xxx, ເຊິ່ງກວມເອົາການຕິດຕັ້ງ, ການດຳເນີນງານ, ການຕັ້ງຄ່າ, ການບຳລຸງຮັກສາ, ລາຍລະອຽດດ້ານເຕັກນິກ ແລະ ການແກ້ໄຂບັນຫາ.
ກ່ອນview ຄູ່ມືຜູ້ໃຊ້ AKO V3 Transmitter
ຄູ່​ມື​ການ​ນໍາ​ໃຊ້​ສໍາ​ລັບ AKO V3 Gas Transmitter (ແບບ AKO-575xxx), ລາຍ​ລະ​ອຽດ​ການ​ຕິດ​ຕັ້ງ, ການ​ດໍາ​ເນີນ​ງານ, ການ​ຕັ້ງ​ຄ່າ, ແລະ​ສະ​ເພາະ​ດ້ານ​ວິ​ຊາ​ການ​ສໍາ​ລັບ​ການ​ກວດ​ສອບ​ອາຍ​ແກ​ັ​ສ​ທີ່​ຖືກ​ຕ້ອງ. ລວມມີຂໍ້ມູນການເຊື່ອມໂຍງຄລາວ NB-IoT.
ກ່ອນview AKO-555244 Alarm Centre User Manual - Trapped Person, Gas, Temperature Monitoring
Comprehensive user manual for the AKO-555244 Alarm Centre, detailing installation, operation, programming, and technical specifications for monitoring trapped persons, gas, and temperature.
ກ່ອນview AKO-575xxx Gasgeber V3 Benutzerhandbuch
Umfassendes Benutzerhandbuch für den AKO-575xxx Gasgeber V3 von AKO. Enthält detaillierte Anleitungen zu ການຕິດຕັ້ງ, ໂຄງສ້າງ, Betrieb, Wartung und technischen Daten für professionalelle Anwendungen.