ແນະນຳ
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
ຂໍ້ມູນຄວາມປອດໄພ
ປະຕິບັດຕາມຄວາມລະມັດລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ສະເໝີໃນລະຫວ່າງການຕິດຕັ້ງ ແລະນຳໃຊ້:
- ຄວາມອາດສາມາດນ້ໍາຫນັກ: ຢ່າຮັບນ້ຳໜັກເກີນ 88 ປອນ (40 ກິໂລກຣາມ). ການບັນທຸກນ້ຳໜັກເກີນອາດເຮັດໃຫ້ເກີດການບາດເຈັບສາຫັດ ຫຼື ຄວາມເສຍຫາຍຕໍ່ຊັບສິນ.
- ໂຄງສ້າງກຳແພງ: ໃຫ້ແນ່ໃຈວ່າໜ້າຜິວຕິດຕັ້ງ (ຝາ) ສາມາດຮອງຮັບນ້ຳໜັກລວມຂອງຕົວຍຶດ ແລະ ໂທລະພາບໄດ້ຢ່າງປອດໄພ.
- UL ລາຍຊື່: ຜະລິດຕະພັນນີ້ໄດ້ຮັບການຈົດທະບຽນ UL, ຊີ້ບອກວ່າມັນຕອບສະໜອງມາດຕະຖານຄວາມປອດໄພສະເພາະ.
- ການຊ່ວຍເຫຼືອດ້ານວິຊາຊີບ: ຖ້າທ່ານບໍ່ແນ່ໃຈກ່ຽວກັບສ່ວນໃດສ່ວນໜຶ່ງຂອງຂະບວນການຕິດຕັ້ງ, ໃຫ້ປຶກສາຜູ້ຊ່ຽວຊານທີ່ມີຄຸນວຸດທິ.
- ເດັກນ້ອຍ: ໃຫ້ເດັກນ້ອຍຢູ່ຫ່າງຈາກພື້ນທີ່ຕິດຕັ້ງໃນລະຫວ່າງການຕັ້ງຄ່າ.
- ເຄື່ອງມື: Use appropriate tools and follow all instructions for their safe operation.
ເນື້ອໃນຊຸດ
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- ແຜ່ນຕິດຝາ
- ຂາຕັ້ງໂທລະທັດ (2 ອັນ)
- ສະກູໂທລະທັດຕ່າງໆ (M4, M6, M8)
- Spacers ແລະ Washers
- Lag Bolts and Concrete Anchors (for specific wall types)
- ລະດັບຟອງ
- ປະແຈ
- ແມ່ແບບການຕິດຕັ້ງ
ຂໍ້ມູນຈໍາເພາະ
| ໝາຍເລກຕົວແບບ | 28XTu2564 |
| ຍີ່ຫໍ້ | mountUP |
| ຄວາມເຂົ້າກັນໄດ້ຂອງຂະ ໜາດ ໂທລະທັດ | 26 ຫາ 65 ນິ້ວ |
| ຄວາມອາດສາມາດນ້ໍາຫນັກ | 88 lbs (40 ກິໂລ) |
| ຄວາມເຂົ້າກັນໄດ້ຂອງ VESA | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| ຄວາມເຂົ້າກັນໄດ້ຂອງປະເພດຝາ | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| ມຸມອຽງ | +5° / -13° |
| ມຸມຫມຸນ | ±45° (Maximum swivel angle depends on TV size) |
| ການປັບລະດັບ | ±3° (Post-installation) |
| ໄລຍະທາງຝາ | 3" ຫາ 15.7" |
| ວັດສະດຸ | ເຫຼັກໂລຫະປະສົມ |
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
ການກວດສອບການຕິດຕັ້ງກ່ອນ
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- ກວດສອບຮູບແບບ VESA ຂອງໂທລະພາບ: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- ກວດສອບປະເພດຝາຜະໜັງ: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. ຢ່າຕິດຕັ້ງໃສ່ drywall ຢ່າງດຽວ.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
ຂັ້ນຕອນການຕິດຕັ້ງ
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
ຮູບ 3: ເກີນview of the 3-Step Easy Installation Process.
ຂັ້ນຕອນທີ 1: ຄັດຕິດວົງເລັບໃສ່ໂທລະພາບ
- ຄ່ອຍໆວາງໂທລະທັດຂອງທ່ານໃຫ້ຫງາຍໜ້າລົງເທິງພື້ນຜິວທີ່ອ່ອນ ແລະ ສະອາດ ເພື່ອປ້ອງກັນຄວາມເສຍຫາຍຕໍ່ໜ້າຈໍ.
- ຈັດຕຳແໜ່ງຂາຕັ້ງໂທລະພາບໃຫ້ກົງກັບຮູຕິດຕັ້ງຢູ່ດ້ານຫຼັງຂອງໂທລະພາບຂອງທ່ານ.
- ເລືອກສະກູ, ແຜ່ນຮອງ ແລະ ຕົວກັ້ນທີ່ເໝາະສົມຈາກຊຸດຮາດແວທີ່ພໍດີກັບຮູຕິດຕັ້ງຂອງໂທລະພາບຂອງທ່ານ.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
ຂັ້ນຕອນທີ 2: ຕິດແຜ່ນຝາກັບຝາ
- Determine the desired height and location for your TV.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Step 3: Hang and Secure TV to Wall Plate
- ດ້ວຍການຊ່ວຍເຫຼືອ, ຍົກໂທລະທັດຂຶ້ນຢ່າງລະມັດລະວັງພ້ອມກັບຂາຍຶດທີ່ຕິດມາ ແລະ ຕິດພວກມັນໃສ່ແຜ່ນຕິດຝາ.
- ໃຫ້ແນ່ໃຈວ່າໂທລະພາບຖືກຕິດຕັ້ງໄວ້ຢ່າງແໜ້ນໜາຢູ່ເທິງແຜ່ນຕິດຝາ.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
ຄໍາແນະນໍາການດໍາເນີນງານ
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewມຸມ.
ປັບ Viewໃນມຸມ
- ອຽງ: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewສະດວກສະບາຍ.
- ໝູນ: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewຖ່າຍຈາກພື້ນທີ່ຕ່າງໆຂອງຫ້ອງ.
- ສ່ວນຂະຫຍາຍ: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- ການປັບລະດັບ: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
ບໍາລຸງຮັກສາ
ການບຳລຸງຮັກສາເປັນປະຈຳຊ່ວຍຮັບປະກັນອາຍຸການໃຊ້ງານທີ່ຍາວນານ ແລະ ປອດໄພຂອງຕົວຍຶດຝາໂທລະພາບຂອງທ່ານ.
- ທໍາຄວາມສະອາດ: ເຊັດຕົວຍຶດດ້ວຍຜ້າອ່ອນໆແລະແຫ້ງເພື່ອເອົາຝຸ່ນອອກ. ຫຼີກລ່ຽງການໃຊ້ນໍ້າຢາທໍາຄວາມສະອາດທີ່ມີສີຂັດ ຫຼື ຕົວລະລາຍ.
- ກວດສອບເປັນໄລຍະ: ກວດເບິ່ງທຸກໆສະກູແລະສະລັອດເປັນໄລຍະເພື່ອຮັບປະກັນວ່າພວກມັນແຫນ້ນແຫນ້ນ. ເຄັ່ງຄັດຄືນໃໝ່ຖ້າຈຳເປັນ.
- ການເຄື່ອນໄຫວ: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
ການແກ້ໄຂບັນຫາ
ຖ້າທ່ານພົບບັນຫາໃນລະຫວ່າງ ຫຼື ຫຼັງຈາກການຕິດຕັ້ງ, ໃຫ້ພິຈາລະນາວິທີແກ້ໄຂທົ່ວໄປຕໍ່ໄປນີ້:
- ໂທລະພາບບໍ່ແມ່ນລະດັບ: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- ພູເຂົາຮູ້ສຶກວ່າງ: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- ການປັບຄວາມຫຍຸ້ງຍາກ: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- ຊິ້ນສ່ວນທີ່ຂາດຫາຍໄປ: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
MOUNTUP TV wall mount series are backed by a ແຜນການປົກປ້ອງ 3 ປີ. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual:
