ແນະນຳ
Welcome to your Satco S11540 LED bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED light bulb. Please read these instructions carefully before use and retain them for future reference.
This LED bulb is designed to provide efficient and warm illumination. It features 9.5 Watts of power consumption, a 2700K warm white color temperature, a GU24 twist-and-lock base, and operates at 120 Volts. It is intended for indoor use only.
Image: The Satco S11540 LED bulb, featuring a frosted finish and a GU24 base. This image illustrates the overall design of the product.
ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ
ເພື່ອຮັບປະກັນການເຮັດວຽກທີ່ປອດໄພ ແລະປ້ອງກັນຄວາມເສຍຫາຍ, ກະລຸນາປະຕິບັດຕາມຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້:
- ປິດພະລັງງານ: Always turn off the power to the fixture at the circuit breaker or fuse box before installing, removing, or cleaning the bulb.
- ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ: This bulb is designed for indoor applications. Do not use it in outdoor fixtures or in areas exposed to moisture unless the fixture is specifically rated for such conditions.
- ສະບັບtage ຄວາມເຂົ້າກັນໄດ້: ຮັບປະກັນ fixture ຂອງ voltage (120V) matches the bulb's voltage.
- ປະເພດພື້ນຖານ: Only use this bulb in fixtures designed for a GU24 base. Forcing it into an incompatible socket can cause damage or electrical hazard.
- ບໍ່ມີການຖອດ: Do not attempt to disassemble, modify, or repair the bulb. This can lead to electric shock, fire, or void the warranty.
- ຄວາມຮ້ອນ: Although LED bulbs run cooler than incandescent bulbs, they still generate some heat. Allow the bulb to cool before handling.
- ການຖິ້ມຂີ້ເຫຍື້ອ: ຖິ້ມຫລອດໄຟຕາມກົດລະບຽບທ້ອງຖິ່ນສໍາລັບສິ່ງເສດເຫຼືອເອເລັກໂຕຣນິກ.
ຄໍາແນະນໍາການຕິດຕັ້ງ
Follow these steps to properly install your Satco S11540 LED bulb:
- ປິດໄຟ: Locate the light fixture's power switch and turn it to the OFF position. For added safety, turn off the power at the circuit breaker or fuse box.
- ເອົາດອກໄຟເກົ່າອອກ (ຖ້າມີ): If replacing an existing bulb, allow it to cool completely. Then, gently twist the old GU24 bulb counter-clockwise to unlock and remove it from the socket.
- ໃສ່ດອກໄຟໃໝ່: Align the two pins of the Satco S11540 LED bulb with the slots in the GU24 socket. Gently push the bulb into the socket and twist clockwise until it locks securely into place. Do not overtighten.
- ຟື້ນຟູພະລັງງານ: ເປີດໄຟຄືນຢູ່ທີ່ເບກເກີ ຫຼື ກ່ອງຟິວ, ຈາກນັ້ນເປີດສະວິດໄຟເພື່ອທົດສອບຫລອດໄຟໃໝ່.
ການດໍາເນີນງານ
Operating your Satco S11540 LED bulb is straightforward:
- ເປີດ: Activate the light switch connected to the fixture to illuminate the bulb.
- ປິດ: ປິດໃຊ້ງານສະວິດໄຟເພື່ອປິດດອກໄຟ.
This bulb is designed for standard on/off functionality. It is not specified as dimmable, so avoid using it with dimmer switches unless explicitly stated otherwise by the manufacturer to prevent damage or malfunction.
ບໍາລຸງຮັກສາ
The Satco S11540 LED bulb requires minimal maintenance to ensure its longevity and performance:
- ທໍາຄວາມສະອາດ: Before cleaning, always turn off the power to the fixture and allow the bulb to cool. Use a soft, dry, lint-free cloth to gently wipe the bulb. Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the bulb's finish or internal components.
- ການທົດແທນ: When the bulb reaches the end of its lifespan, follow the installation instructions in reverse to safely remove and replace it with a new, compatible GU24 LED bulb.
ການແກ້ໄຂບັນຫາ
If you encounter issues with your Satco S11540 LED bulb, refer to the following table for common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| Bulb ບໍ່ສະຫວ່າງ | No power to the fixture; Bulb not properly seated; Bulb has reached end of life | Check power switch and circuit breaker; Ensure bulb is securely twisted into the GU24 socket; Replace bulb if necessary |
| ດອກໄຟ flickers | Loose connection; Incompatible dimmer switch; Voltage ການເຫນັງຕີງ | Ensure bulb is securely seated; Remove any dimmer switches if the bulb is not rated for dimming; Consult an electrician for persistent voltage ບັນຫາ |
| Bulb is too dim or too bright | Incorrect bulb for application; Incompatible dimmer switch | Verify the bulb's specifications (wattage, lumens) match your lighting needs; Ensure no dimmer switch is in use if the bulb is not dimmable |
ຂໍ້ມູນຈໍາເພາະຂອງຜະລິດຕະພັນ
Detailed specifications for the Satco S11540 LED Bulb:
- ຍີ່ຫໍ້: Satco
- ຊື່ຕົວແບບ: S11540
- ປະເພດແສງ: LED
- ວັດtage: 9.5 Watts (Power Consumption)
- ທຽນທຽບເທົ່າ ວັດtage: 60 ວັດ
- ອຸນຫະພູມສີ: 2700 Kelvin (ສີຂາວອົບອຸ່ນ)
- ຄວາມສະຫວ່າງສີຂາວ: 800 Lumens
- Bulb Base: GU24
- ສະບັບtage: 120 ໂວນ
- ສະບັບທີ່ຍອມຮັບtage ຄວາມຖີ່: 100 ຫາ 240 Volts ແລະ 60 Hertz
- ຂະໜາດຮູບຮ່າງຂອງດອກໄຟ: T3
- ຮູບຮ່າງ: Candle(C)
- ວັດສະດຸ: ແກ້ວ
- ສໍາເລັດຮູບ: Frosted
- ການນໍາໃຊ້ພາຍໃນ / ນອກ: ພາຍໃນ
- ຊີວິດສະເລ່ຍ: 2.86 Years (based on 10 hours/day usage)
- ດັດຊະນີການສະແດງສີ (CRI): 80
- ປະສິດທິພາບ: 84.21 lm/W
- ຂະໜາດຜະລິດຕະພັນ: 2.76 x 2.76 x 2.95 ນິ້ວ
- ນ້ໍາຫນັກລາຍການ: 2.88 ອອນ
- ຄຸນນະສົມບັດພິເສດ: ພະລັງງານປະສິດທິພາບ
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
ຂໍ້ມູນການຮັບປະກັນ: This Satco S11540 LED bulb comes with a 5-year limited warranty, based on 10 hours of use per day. Please retain your proof of purchase for warranty claims.
ການຊ່ວຍເຫຼືອລູກຄ້າ: For technical assistance, warranty inquiries, or further information regarding your Satco product, please contact Satco customer service directly. Refer to the official Satco website or product packaging for current contact details.
