ຄູ່ມືຜູ້ໃຊ້ເຄື່ອງຄວບຄຸມຊົນລະປະທານພາຍໃນ Galcon / DIG 8006 AC-6 ຫົກສະຖານີ

1. ການແນະນໍາ ແລະຫຼາຍກວ່າview

The Galcon/DIG 8006 AC-6 is a residential indoor irrigation controller designed for efficient management of your watering system. This controller is capable of operating up to six irrigation control valves, in addition to a master valve or pump start relay.

It features a large, easy-to-program LCD screen and four intuitive buttons for comprehensive programming. The 8006 AC-6 offers flexible scheduling options, allowing independent programming for each valve and the ability to operate two valves simultaneously. Programming can be set based on specific days of the week (Daily/Weekly) or in cyclical patterns. Irrigation durations can range from as short as 1 minute to as long as 12 hours.

The controller includes a sensor input for connecting rain sensors or soil moisture sensors, enabling water conservation by preventing irrigation in areas already wet. This sensor input can be assigned to individual valves, providing precise control. Additional features include monthly water budgeting (10% - 190% adjustment), a rain delay function of up to 30 days with auto-restart, and automatic short circuit detection that isolates faulty valves while continuing irrigation for others.

ຮູບ 1.1: ດ້ານຫນ້າ view of the Galcon/DIG 8006 AC-6 controller with its protective cover open, revealing the LCD display, programming buttons, and valve indicators. The cover also displays icons for various functions like Irrigation Cycle, Low Battery, Percentage Setting, and Master Valve.

2. ຂໍ້ມູນຄວາມປອດໄພ

• This controller is designed for ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ. Do not install outdoors or in areas exposed to direct water spray.
• ໃຫ້ແນ່ໃຈວ່າການປິດການສະຫນອງພະລັງງານກ່ອນທີ່ຈະດໍາເນີນການສາຍຫຼືການບໍາລຸງຮັກສາ.
• All electrical connections should be made by a qualified individual and comply with local electrical codes.
• Do not attempt to open or repair the controller yourself. Refer to qualified service personnel.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.

3. ເນື້ອໃນຊຸດ

ກວດ​ສອບ​ວ່າ​ລາຍ​ການ​ທັງ​ຫມົດ​ແມ່ນ​ມີ​ຢູ່​ໃນ​ຊຸດ​:

• Galcon/DIG 8006 AC-6 Irrigation Controller Unit
• Power Adapter (if external) or Power Cord (if internal)
• ຮາດແວຕິດຕັ້ງ (ສະກູ, ສະມໍ)
• ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

4.1 ການຕິດຕັ້ງຕົວຄວບຄຸມ

Choose a suitable indoor location, away from direct sunlight, heat sources, and moisture. Ensure there is adequate space for wiring and access to the display.

1. Mark the desired mounting points on the wall using the controller as a template.
2. ເຈາະຮູທົດລອງຢູ່ບ່ອນທີ່ໝາຍໄວ້.
3. Insert wall anchors (if necessary) into the drilled holes.
4. ຮັບປະກັນຕົວຄວບຄຸມກັບຝາໂດຍໃຊ້ສະກູທີ່ສະຫນອງໃຫ້.

4.2 ການເຊື່ອມຕໍ່ສາຍໄຟຂອງວາວ

The 8006 AC-6 supports up to six irrigation valves and one master valve/pump start relay. Ensure all wiring is done with the power disconnected.

• Connect one wire from each irrigation valve to its corresponding terminal (1-6) on the controller.
• Connect one wire from the master valve/pump start relay to the "MV" (Master Valve) terminal.
• Connect the common wire from all valves to the "C" (Common) terminal on the controller.

4.3 Connecting a Sensor (Optional)

The controller features a sensor input for rain or soil moisture sensors. It requires a ເປີດປົກກະຕິ (NO) rain sensor.

• Connect the two wires from your normally open rain sensor to the dedicated sensor terminals on the controller.
• Refer to your sensor's manual for specific wiring instructions.
• The sensor input can be assigned to individual valves during programming to prevent irrigation in specific areas.

4.4 ການເຊື່ອມຕໍ່ພະລັງງານ

Once all wiring is complete, connect the controller to a standard 120V AC power outlet.

• Plug the power adapter into the controller's power input jack.
• ສຽບອະແດບເຕີໄຟເຂົ້າໄປໃນປລັກສຽບໄຟຟ້າທີ່ມີສາຍດິນ.
• The LCD screen should illuminate, indicating power is supplied.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

5.1 Understanding the Display and Buttons

The LCD screen provides all necessary programming information. The four buttons below the screen are used for navigation and data entry.

• ຈໍ LCD: Shows current time, day, program status, valve indicators (1-6), and programming parameters.
• ປຸ່ມ:
  • Next Step (Leftmost button with square arrow): Moves to the next programming step or option.
  • ປຸ່ມລົບ (-): Decreases a value or moves backward through options.
  • ປຸ່ມບວກ (+): Increases a value or moves forward through options.
  • Changing Mode (Rightmost button with right arrow): Switches between different programming modes (e.g., setting time, programming valves).

5.2 Initial Setup: Setting Current Time and Day

1. ກົດ ປ່ຽນໂໝດ button until the time setting appears on the LCD.
2. ໃຊ້ ບວກ (+) ແລະ ລົບ (-) ປຸ່ມເພື່ອປັບຊົ່ວໂມງ.
3. ກົດ ຂັ້ນຕອນຕໍ່ໄປ ເພື່ອຍ້າຍໄປຫານາທີ, ຈາກນັ້ນປັບດ້ວຍ ບວກ (+) ແລະ ລົບ (-).
4. ກົດ ຂັ້ນຕອນຕໍ່ໄປ to move to the day of the week, then adjust with ບວກ (+) ແລະ ລົບ (-) until the current day is selected.
5. ກົດ ປ່ຽນໂໝດ to exit time/day setting.

5.3 Programming Irrigation Valves

The controller allows independent programming for each of the six valves.

5.3.1 Selecting a Valve

ກົດ ປ່ຽນໂໝດ button until the valve programming screen appears, typically indicated by a flashing valve number (1-6). Use the ຂັ້ນຕອນຕໍ່ໄປ button to cycle through valves 1-6 and the Master Valve (MV).

5.3.2 Setting Irrigation Duration

1. With the desired valve selected, press ຂັ້ນຕອນຕໍ່ໄປ to highlight the duration setting.
2. ໃຊ້ ບວກ (+) ແລະ ລົບ (-) to set the watering duration from 1 minute to 12 hours.

5.3.3 Setting Start Times (Daily/Weekly Programming)

Up to 4 start times can be set per valve when using daily/weekly programming.

1. After setting duration, press ຂັ້ນຕອນຕໍ່ໄປ to move to the first start time.
2. Adjust the hour and minutes using ບວກ (+) ແລະ ລົບ (-).
3. ກົດ ຂັ້ນຕອນຕໍ່ໄປ to move to the next start time, or to the day selection if no more start times are needed.

5.3.4 Selecting Watering Days (Daily/Weekly Programming)

1. After setting start times, press ຂັ້ນຕອນຕໍ່ໄປ to enter day selection mode.
2. The days of the week (M Tu W Th F Sa Su) will be displayed. Use ບວກ (+) or ລົບ (-) to toggle irrigation ON/OFF for each day.
3. ກົດ ຂັ້ນຕອນຕໍ່ໄປ to confirm and move to the next valve or exit programming.

5.3.5 Cyclic Programming

Cyclic programming allows irrigation every X days (e.g., every 3 days). The cycle can be as short as every day or as long as every 30 days.

1. While in valve programming mode, cycle through the day selection options until "Cyclic" or a similar indicator appears.
2. ໃຊ້ ບວກ (+) ແລະ ລົບ (-) to set the number of days in the cycle (e.g., "3" for every 3 days).
3. Set the start time for the cycle.

5.4 Sensor Input Configuration

The sensor input can be configured to affect specific valves.

1. Navigate to the sensor configuration menu (refer to the controller's display for specific icons or text).
2. For each valve (1-6), you can enable or disable the sensor's effect. This allows you to prevent irrigation in areas exposed to rain (e.g., lawn) while allowing it in protected areas (e.g., covered patio).

5.5 Monthly Water Budgeting

Adjust the overall irrigation duration for all active programs from 10% to 190% to account for seasonal changes without reprogramming individual valves.

1. Access the Water Budgeting menu (look for a percentage icon on the display).
2. ໃຊ້ ບວກ (+) ແລະ ລົບ (-) to set the desired percentage. 100% is the programmed duration.

5.6 ຝົນຕົກຊ້າ

Temporarily suspend irrigation for a set period, up to 30 days.

1. Navigate to the Rain Delay function (often indicated by a rain cloud icon).
2. ໃຊ້ ບວກ (+) ແລະ ລົບ (-) to set the number of days for the delay.
3. The controller will automatically resume the programmed schedule after the delay period.

5.7 ການປະຕິບັດຄູ່ມື

The controller supports semi-automatic and manual modes for individual valves or all valves simultaneously.

• Manual Valve Operation: Navigate to the manual mode. Select the desired valve (1-6 or MV) and set a manual run time. The valve will operate for the set duration.
• Manual All Valves: In manual mode, select the option to run all valves sequentially. Each valve will run for its programmed duration.
• To stop manual operation, press the appropriate button (often the "Changing Mode" or "Next Step" button, or a dedicated "OFF" option).

6. ບໍາລຸງຮັກສາ

6.1 ການທໍາຄວາມສະອາດ

ເຊັດດ້ານນອກຂອງຕົວຄວບຄຸມດ້ວຍຄວາມອ່ອນໂຍນ, damp cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the unit.

6.2 Battery Replacement (if applicable)

While the 8006 AC-6 is an AC-powered controller, some models may include a small backup battery (e.g., 9V or coin cell) to retain programming during power outages. If your unit has a battery compartment, replace the battery annually or when a "Low Battery" indicator appears on the display.

1. ຕັດການເຊື່ອມຕໍ່ພະລັງງານກັບຕົວຄວບຄຸມ.
2. Locate the battery compartment (usually on the back or side).
3. Remove the old battery and insert a new one, observing polarity.
4. Close the compartment and reconnect power.

7. ການແກ້ໄຂບັນຫາ

8. ຂໍ້ມູນຈໍາເພາະ

• ຕົວແບບ: Galcon/DIG 8006 AC-6
• ສະຖານີ: 6 (plus Master Valve/Pump Start)
• ການປ້ອນຂໍ້ມູນພະລັງງານ: 120V AC
• ປະເພດການສະແດງ: ຈໍ LCD
• ຕົວເລືອກການຂຽນໂປຼແກຼມ: Daily/Weekly, Cyclic
• ເວລາເລີ່ມຕົ້ນ: Up to 4 per valve (Daily/Weekly)
• ໄລຍະເວລາຊົນລະປະທານ: 1 ນາທີຫາ 12 ຊົ່ວໂມງ
• Cyclic Interval: Every day to every 30 days
• ເຊັນເຊີເຂົ້າ: Yes (for Normally Open sensors like rain or soil moisture)
• Water Budgeting: 10% - 190% adjustment
• ຝົນລ່າຊ້າ: ສູງສຸດ 30 ມື້
• ການກວດຫາຄວາມຜິດ: Automatic short circuit detection
• ອຸນຫະພູມປະຕິບັດການ: 68 ອົງສາຟາເຣນຮາຍ
• UPC: 077985211233
• ຜູ້ຜະລິດ: Galcon

9. ຂໍ້ມູນການຮັບປະກັນ

For detailed warranty information, please refer to the warranty card included with your product or visit the official Galcon webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.

10. ສະຫນັບສະຫນູນ

If you encounter any issues or have questions regarding the Galcon/DIG 8006 AC-6 controller that are not covered in this manual, please contact Galcon or DIG customer support.

• ຊັບພະຍາກອນອອນໄລນ໌: Visit the official Galcon or DIG Corporation website for FAQs, updated manuals, and support contact information. A user review ກ່າວ digcorp.com for technical details and full manual.
• ບໍລິການລູກຄ້າ: ໃຫ້ອ້າງອີງເຖິງລາຍລະອຽດການຕິດຕໍ່ທີ່ໄດ້ລະບຸໄວ້ໃນການຫຸ້ມຫໍ່ຜະລິດຕະພັນ ຫຼື ຂອງຜູ້ຜະລິດ webເວັບໄຊ.