ແນະນຳ
This manual provides comprehensive instructions for the KeylessOption Keyless Entry Remote Starter Car Key Fob. This remote is designed as a replacement for aftermarket Viper alarm and remote start systems. Ensure your original remote's FCC ID matches EZSDEI7141 for compatibility.
ຮູບພາບ: ທາງຫນ້າ view of the KeylessOption Key Fob, displaying the lock, unlock, AUX, and star buttons.
ການຕັ້ງຄ່າແລະການດໍາເນີນໂຄງການ
Programming this remote requires locating the Viper system's control button, often found near the rearview mirror, under the dashboard, or in other discreet locations depending on the installation. Refer to your vehicle's specific Viper system manual or consult a professional if you cannot locate it.
ຂັ້ນຕອນການຂຽນໂປຣແກຣມ:
- Open the driver's side door of your vehicle.
- Insert the key into the ignition and turn it to the ON position. Do not start the engine.
- Locate the Viper system's control button (often a small button with a blue LED indicator).
- ກົດປຸ່ມຄວບຄຸມ ເຈັດເທື່ອ. ສຸດ eighth press, hold the button down until the car chirps.
- While still holding the control button, press the ລັອກ button on your new KeylessOption remote. The car should chirp again to confirm successful programming.
- ປ່ອຍປຸ່ມຄວບຄຸມ.
- ຫັນປຸ່ມຈຸດລະເບີດໄປທີ່ ປິດ ຕໍາແຫນ່ງແລະເອົາມັນອອກ.
- Close the driver's side door.
- Test the remote's functions (Lock, Unlock, etc.) to ensure proper operation.
If you are programming multiple remotes, repeat steps 4 and 5 for each additional remote before turning the key off in step 6.
ວິດີໂອ: ສະຫຼຸບໂດຍຫຍໍ້view of KeylessOption Key Fob Remotes for Viper systems.
ຄໍາແນະນໍາການດໍາເນີນງານ
Once programmed, your KeylessOption remote provides convenient control over your vehicle's aftermarket alarm and remote start system. The remote features four distinct buttons:
- ປຸ່ມລັອກ: Press to lock your vehicle's doors and arm the alarm system.
- ປຸ່ມປົດລັອກ: Press to unlock your vehicle's doors and disarm the alarm system.
- ປຸ່ມ AUX: This button typically controls auxiliary functions, such as opening the trunk or activating a remote start feature, depending on your Viper system's configuration. Refer to your Viper system's manual for specific AUX button functionality.
- Panic Button (*): Press and hold this button to activate the vehicle's panic alarm. Press again to deactivate.
ຮູບພາບ: ມຸມ view of the KeylessOption Key Fob, highlighting its ergonomic design.
ບໍາລຸງຮັກສາ
ການປ່ຽນແບັດເຕີຣີ:
If your remote's range decreases or it stops responding, the battery may need replacement. The KeylessOption remote uses a standard coin cell battery (e.g., CR2032, check inside the remote for exact type). To replace:
- Carefully separate the two halves of the remote casinໂດຍໃຊ້ໄຂຄວງຫົວແບນຂະໜາດນ້ອຍ ຫຼື ເຄື່ອງມືງັດ.
- Remove the old battery. Note its orientation (+/- sides).
- Insert the new battery with the correct orientation.
- ກົດປຸ່ມ c ເພື່ອປິດຣີໂໝດasing ກັບຄືນຮ່ວມກັນຢ່າງປອດໄພ.
ຮູບພາບ: ກັບຄືນໄປບ່ອນ view of the KeylessOption Key Fob, indicating where the casing can be opened for battery access.
ການແກ້ໄຂບັນຫາ
- ໄລຍະໄກບໍ່ຕອບສະໜອງ: Ensure the battery is fresh and correctly installed. Re-attempt the programming steps carefully. Verify the FCC ID on your original remote matches EZSDEI7141.
- ຂອບເຂດຈໍາກັດ: Replace the battery. Ensure there are no obstructions between the remote and the vehicle's antenna.
- Vehicle not chirping during programming: Double-check that the ignition is in the ON position (not ACC or START). Confirm you are pressing the Viper control button the correct number of times and holding it on the last press until a chirp is heard.
ຂໍ້ມູນຈໍາເພາະ
| ຍີ່ຫໍ້ | KeylessOption |
| ໝາຍເລກຕົວແບບ | EZSDEI7141 474V |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | Viper Aftermarket Alarm System |
| FCC ID | EZSDEI7141 |
| ຈໍານວນປຸ່ມ | 4 (Lock, Unlock, Aux, Panic) |
| ນ້ໍາຫນັກລາຍການ | 0.634 ອອນ |
| ຂະໜາດແພັກເກັດ | 6.77 x 4.65 x 0.47 ນິ້ວ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Each KeylessOption remote includes a warranty card. KeylessOption is an automotive remote company dedicated to providing reliable replacement automotive products. For further assistance or warranty claims, please refer to the contact information provided on your warranty card or visit the official KeylessOption webເວັບໄຊ.
Image: KeylessOption Warranty Card, included with each purchase.
