ແນະນຳ
The Maxspect Jump Gyre 4K Flow Pump with Controller is designed to create natural, wave-like water movement in your aquarium. This manual provides detailed instructions for the safe and efficient operation, setup, and maintenance of your Gyre 4K pump system. Please read this manual thoroughly before installation and use.
ຂໍ້ມູນຄວາມປອດໄພ
- Always disconnect power to the pump and controller before performing any maintenance or cleaning.
- ໃຫ້ແນ່ໃຈວ່າມືຂອງທ່ານແຫ້ງເມື່ອຈັບອຸປະກອນໄຟຟ້າ.
- ຢ່າໃຊ້ປ້ຳໃນຂະນະທີ່ເປີດນ້ຳ. ການເປີດປ້ຳແຫ້ງສາມາດເຮັດໃຫ້ເກີດຄວາມເສຍຫາຍໄດ້.
- ຜະລິດຕະພັນນີ້ຖືກອອກແບບມາສຳລັບການນຳໃຊ້ໃນຕູ້ປາພາຍໃນອາຄານເທົ່ານັ້ນ.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
- Inspect the power cord and connections regularly for any signs of damage. Do not use if damaged.
ເນື້ອໃນຊຸດ
ກວດສອບວ່າອົງປະກອບທັງໝົດມີຢູ່ໃນຊຸດ:
- Maxspect Jump Gyre 4K Flow Pump
- Gyre 4K Controller
- ຫນ່ວຍບໍລິການສະຫນອງພະລັງງານ
- ພູແມ່ເຫຼັກ
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ສິນຄ້າເກີນview
The Maxspect Jump Gyre 4K Flow Pump consists of the main pump unit and a separate controller. The pump unit features a unique cross-flow design to generate broad, laminar flow, while the controller allows for precise adjustment of flow patterns and intensity.
Figure 1: Maxspect Jump Gyre 4K Flow Pump. This image displays the main pump unit, characterized by its black cylindrical body with visible orange internal impellers, and the attached magnetic mounting bracket.
ອົງປະກອບທີ່ສໍາຄັນ:
- ໜ່ວຍສູບນ້ຳ: Houses the motor and impellers responsible for water movement.
- ພູແມ່ເຫຼັກ: Secures the pump to the aquarium glass, allowing for easy positioning.
- ຕົວຄວບຄຸມ: External unit with buttons and a display for programming and adjusting pump settings.
- ການສະຫນອງພະລັງງານ: Converts AC power to DC power for safe operation.
ຕັ້ງຄ່າ
- ການຕິດຕັ້ງ Pump:
Select a suitable location in your aquarium for optimal water flow. The pump should be fully submerged. Place the pump unit inside the aquarium and align the external magnetic mount on the outside of the glass, directly opposite the internal magnet. Ensure a secure grip.
- ການເຊື່ອມຕໍ່ຕົວຄວບຄຸມ:
Connect the cable from the pump unit to the designated port on the Gyre 4K Controller. Ensure the connection is firm.
- ກຳລັງເຊື່ອມຕໍ່:
Connect the power supply unit to the controller, then plug the power supply into a GFCI (Ground Fault Circuit Interrupter) protected electrical outlet. The controller display should illuminate.
- ການທົດສອບເບື້ອງຕົ້ນ:
Once powered, the pump should briefly start. Observe for any unusual noises or vibrations. If issues arise, refer to the Troubleshooting section.
ຄໍາແນະນໍາການດໍາເນີນງານ
The Gyre 4K Controller allows for various flow patterns and intensity adjustments. Familiarize yourself with the controller's buttons and display.
ຟັງຊັນຄວບຄຸມ:
- ປຸ່ມໂໝດ: Cycles through different flow modes (e.g., Constant, Pulse, Random, Gyre).
- +/- ປຸ່ມ: Adjust flow intensity or parameter values within a selected mode.
- ປຸ່ມໂໝດຟີດ: Temporarily pauses the pump for feeding, typically for 10 minutes. Press again to resume normal operation.
- ປຸ່ມລັອກ: Locks the current settings to prevent accidental changes.
Programming Flow Patterns:
Refer to the controller's specific display indicators for detailed programming. Generally, you will select a mode, then use the +/- buttons to fine-tune its characteristics (e.g., pulse frequency, gyre direction changes).
ໝາຍເຫດ: For advanced programming and specific mode details, consult the comprehensive digital manual available on the Maxspect website, as controller interfaces can vary slightly between firmware versions.
ບໍາລຸງຮັກສາ
Regular maintenance ensures optimal performance and longevity of your Maxspect Gyre 4K pump.
- ກວດປະຈຳອາທິດ:
Visually inspect the pump for any debris accumulation on the impellers or grates. Ensure the power cord is not kinked or damaged.
- ທໍາຄວາມສະອາດປະຈໍາເດືອນ:
ຂັ້ນຕອນທີ 1: Disconnect the pump from power. Remove the pump unit from the aquarium.
ຂັ້ນຕອນທີ 2: Carefully disassemble the pump by twisting and pulling apart the housing components. Remove the impellers and their shafts.
ຂັ້ນຕອນທີ 3: Soak all disassembled parts (except the motor block) in a solution of white vinegar and water (1:1 ratio) for several hours or overnight to dissolve calcium deposits and algae.
ຂັ້ນຕອນທີ 4: Use a soft brush or pipe cleaner to gently scrub away any remaining debris from the impellers, shafts, and pump housing. Rinse thoroughly with fresh water.
ຂັ້ນຕອນທີ 5: Reassemble the pump, ensuring all parts are correctly aligned and securely fitted. Reinstall in the aquarium and reconnect power.
- ການທົດແທນໃບພັດ:
If the pump exhibits persistent noise, reduced flow, or irregular operation after cleaning, the impellers may be worn and require replacement. Contact Maxspect support or an authorized dealer for genuine replacement parts.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ປັ໊ມບໍ່ແລ່ນ | No power; loose connection; motor blockage. | Check power outlet and connections. Disconnect power, inspect impellers for obstructions, clean if necessary. |
| ການໄຫຼອ່ອນ ຫຼື ບໍ່ສະໝໍ່າສະເໝີ | Impellers or housing clogged with algae/calcium; worn impellers. | Perform thorough cleaning as per Maintenance section. If issue persists, consider replacing impellers. |
| ສິ່ງລົບກວນ / ການສັ່ນສະເທືອນຫຼາຍເກີນໄປ | Debris in impeller chamber; worn impeller shaft/bearings; improper mounting. | Clean pump thoroughly. Check for proper alignment during reassembly. Ensure magnetic mount is secure. Replace worn parts if needed. |
| Controller display off/unresponsive | No power to controller; faulty power supply. | Verify power outlet. Check all cable connections. Test power supply if possible. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact Maxspect customer support.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນລັກສະນະ | ມູນຄ່າ |
|---|---|
| ຍີ່ຫໍ້ | Maxspect |
| ໝາຍເລກຕົວແບບ | MJ-GF4K |
| ອັດຕາການໄຫຼສູງສຸດ | 3962 Gallons ຕໍ່ນາທີ |
| ວັດtage | 45 ວັດ |
| ສະບັບtage | 220 ໂວນ (AC) |
| ຂະໜາດສິນຄ້າ (L x W x H) | 12.25" x 3.5" x 1.72" |
| ນ້ໍາຫນັກລາຍການ | 4.6 ປອນ (2.09 ກິໂລກຣາມ) |
| ວັດສະດຸ | ພາດສະຕິກ |
| ແຫຼ່ງພະລັງງານ | DC Powered, Mains Powered |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Maxspect products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Maxspect webເວັບໄຊ. ໂດຍທົ່ວໄປແລ້ວການຮັບປະກັນແມ່ນໃຊ້ກັບຂໍ້ບົກພ່ອງໃນການຜະລິດ ແລະອາດຈະແຕກຕ່າງກັນໄປຕາມພາກພື້ນ.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Maxspect customer service through their official website or your authorized dealer. When contacting support, please have your product model number (MJ-GF4K) and purchase date available.
ການປະຕິເສດຄວາມຮັບຜິດຊອບ: This manual provides general guidance. Maxspect reserves the right to make changes to product specifications and features without prior notice. Always refer to the latest information available from the manufacturer.
