Refoss Garage Door Opener Remote User Manual

1. ບົດແນະນຳ

Thank you for choosing the Refoss Garage Door Opener Remote. This remote control is designed to provide convenient and reliable access to your garage. It is compatible with specific Liftmaster, Chamberlain, and Craftsman garage door openers that utilize an Orange or Red learn button and operate on a 390MHz frequency. Please read this manual carefully before installation and programming to ensure proper operation.

Image 1.1: The Refoss Garage Door Opener Remote, featuring three control buttons.

2. ຄວາມເຂົ້າກັນໄດ້

This Refoss remote control is specifically designed for garage door openers manufactured between 1997 and 2005 that feature an ສີສົ້ມ or ສີແດງ learn button. It operates on the Security+ 390MHz frequency.

ສຳຄັນ: ກ່ອນທີ່ຈະຊື້asing or attempting to program, verify that your garage door opener has an Orange or Red learn button. This remote is not compatible with garage door openers that have Purple, Yellow, Green, or other colored learn buttons, or with newer Liftmaster MyQ type openers.

ຮູບແບບທີ່ເຂົ້າກັນໄດ້ລວມມີ:

• Liftmaster Openers: 1245R/1255R, 1265R, 2220, 2245/2255, 2265, 2280, 2500, 2575, 2585, 2595.
• Liftmaster/Craftsman Remote Models: 91LM, 92LM, 94LM, 96LM, 970LM, 971LM, 972LM, 973LM, 973W, 974LM, 139.53680, 139.53681, 139.53684, 00953680000, 00953681000.
• Chamberlain Remote Models: 950CB, 953CB, 956CB.

Image 2.1: A compatibility chart detailing various garage door opener brands and their corresponding learn button types or frequencies. This remote is compatible with Chamberlain Orange Button 1997-2005 390MHz systems.

3. ເນື້ອໃນຊຸດ

Upon opening your Refoss Garage Door Opener Remote package, you should find the following items:

• 1 x Refoss Garage Door Remote Control
• 1 x ຄລິບປ້ອງກັນກະຈົກໜ້າ
• 1 x ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)

ໝາຍເຫດ: A CR2032 battery is required for operation and is typically not included in the package. Please ensure you have one available for initial setup.

4. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ

4.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

1. ຊອກຫາຊ່ອງໃສ່ຫມໍ້ໄຟຢູ່ດ້ານຫຼັງຂອງການຄວບຄຸມໄລຍະໄກ.
2. Using a small screwdriver or coin, gently open the battery compartment cover.
3. Insert one CR2032 battery, ensuring the positive (+) side faces up.
4. ປ່ຽນຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟໃຫ້ປອດໄພ.

4.2 Attaching the Visor Clip

The included visor clip allows you to conveniently attach the remote control to your vehicle's sun visor.

1. Slide the visor clip into the designated slot on the back of the remote control until it clicks into place.
2. Attach the remote control to your car's sun visor for easy access.

5. ຄຳແນະນຳການໃຊ້ງານ (ການຂຽນໂປຣແກຣມ)

The Refoss remote control features three buttons, allowing you to control up to three different garage door openers. Follow these steps to program your remote:

1. Locate the Learn Button on Your Garage Door Opener: This button is typically found on the back or side panel of the garage door opener motor unit, usually near the antenna wire. Ensure it is an ສີສົ້ມ or ສີແດງ ປຸ່ມ.
2. Press and Release the Learn Button: Press and immediately release the learn button on your garage door opener. The LED indicator on the opener will light up, indicating it is in programming mode. You will have approximately 30 seconds to complete the next step.
3. Press the Desired Button on Your Refoss Remote: Within 30 seconds of pressing the learn button on the opener, press and hold the button on your Refoss remote control that you wish to program.
4. Release the Remote Button: Release the button on the Refoss remote when the garage door opener's light flashes or you hear a click. This indicates successful programming.
5. ທົດສອບໄລຍະໄກ: Press the programmed button on your Refoss remote control. The garage door should activate.
6. Program Additional Doors (Optional): To program additional garage doors, repeat steps 1-5 for each door, using a different button on your Refoss remote for each opener.

If you encounter difficulties during programming, please refer to the Troubleshooting section or contact customer support.

6. ບໍາລຸງຮັກສາ

6.1 ການທົດແທນຫມໍ້ໄຟ

If the remote control's range decreases or the LED indicator does not light up when a button is pressed, it may be time to replace the battery.

1. ປະຕິບັດຕາມຂັ້ນຕອນໃນພາກ 4.1 ເພື່ອເປີດຊ່ອງໃສ່ຫມໍ້ໄຟ.
2. ເອົາແບັດ CR2032 ເກົ່າອອກ.
3. ໃສ່ແບັດ CR2032 ໃໝ່ ໂດຍໃຫ້ດ້ານບວກ (+) ຫັນໜ້າຂຶ້ນ.
4. ປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.

ຖິ້ມແບັດເຕີລີ່ເກົ່າຕາມລະບຽບການທ້ອງຖິ່ນ.

6.2 ການທໍາຄວາມສະອາດ

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the remote's finish or internal components.

7. ການແກ້ໄຂບັນຫາ

• Remote does not work after programming:
  • Ensure your garage door opener has an Orange or Red learn button.
  • Verify the battery is correctly installed and not depleted.
  • Repeat the programming steps carefully, ensuring you press the learn button on the opener and then the remote button within the 30-second window.
  • Try programming a different button on the remote.
• ໄລຍະໄກບໍ່ດີ:
  • ປ່ຽນແບັດເຕີລີ່ CR2032 ໃໝ່.
  • ໃຫ້ແນ່ໃຈວ່າບໍ່ມີສິ່ງກີດຂວາງລະຫວ່າງທາງໄກ ແລະເສົາອາກາດຂອງປະຕູບ່ອນຈອດລົດ.
  • Check if the garage door opener's antenna is hanging freely and not obstructed.
• Remote accidentally opens/closes the door:
  • Reprogram the remote to ensure it's properly synced.
  • If the issue persists, consider clearing all remote codes from your garage door opener and reprogramming only the desired remotes. Consult your garage door opener's manual for instructions on clearing codes.

8. ຂໍ້ມູນຈໍາເພາະ

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

Refoss is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided, we offer dedicated customer support to assist you with any questions or issues you may encounter.

If you have any questions regarding the Refoss Garage Door Opener Remote, its compatibility, installation, or programming, please do not hesitate to contact our support team.

ອີເມວຊ່ວຍເຫຼືອລູກຄ້າ: support@refoss.net

Our support team aims to resolve your problem within 24 hours.