1. ບົດແນະນຳ
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.
2. ຂໍ້ມູນຄວາມປອດໄພ
- ອ່ານຄໍາແນະນໍາທັງຫມົດຢ່າງລະອຽດກ່ອນທີ່ຈະຕິດຕັ້ງແລະການດໍາເນີນງານ.
- Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
- ໃຫ້ແນ່ໃຈວ່າອຸປະກອນຖືກຕິດຕັ້ງຢູ່ໃນສະຖານທີ່ທີ່ໝັ້ນຄົງເພື່ອປ້ອງກັນການຕົກໂດຍບັງເອີນ.
- Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
- ຮັກສາອຸປະກອນໃຫ້ໄກຈາກເດັກນ້ອຍ.
3. ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນຊຸດ:
- 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
- ວົງເລັບ 1x
- 1x Set of Screws and Wall Plugs
- 1x Battery (Alkaline)
- 1x Quick Start Guide (this manual)
4. ຜະລິດຕະພັນເກີນview
The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.
ຮູບທີ 1: ດ້ານໜ້າ view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.
ອົງປະກອບທີ່ສໍາຄັນ:
- ເລນ PIR: Detects infrared radiation from moving bodies.
- ຕົວຊີ້ວັດ LED: Provides status feedback (e.g., detection, low battery).
- ຊ່ອງໃສ່ຫມໍ້ໄຟ: Houses the power source.
- ຈຸດເຊື່ອມຕໍ່: For secure installation on a wall.
- Tampສະຫຼັບ er: Triggers an alarm if the sensor cover is opened.
5. ຕັ້ງຄ່າ
5.1. ການຕິດຕັ້ງຫມໍ້ໄຟ
- Open the sensor's front cover by gently prying it open from the bottom notch.
- Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
- Close the front cover, ensuring it clicks securely into place.
5.2. ການຕິດຕັ້ງເຊັນເຊີ
The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.
- Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
- ໃຊ້ຕົວຍຶດຕິດເປັນແມ່ແບບເພື່ອຫມາຍຕໍາແຫນ່ງ screw ເທິງຝາ.
- ເຈາະຮູໃສ່ຕໍາແໜ່ງທີ່ໝາຍໄວ້ ແລະໃສ່ປລັກສຽບໃສ່ຝາ.
- ຍຶດເຂັມຍຶດຕິດໃສ່ຝາດ້ວຍສະກູທີ່ໃຫ້ໄວ້.
- Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.
5.3. Pairing with a Security System
Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:
- Putting your security system into "pairing" or "enrollment" mode.
- Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
- Confirming successful pairing through the system's interface or LED indicators.
6. ປະຕິບັດການເຊັນເຊີ
6.1. Detection Principle
The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.
6.2. ສະຖານະຕົວຊີ້ວັດ LED
- Brief Flash: Indicates motion detection.
- Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
- ບໍ່ມີແສງ: Normal standby mode, or battery is completely depleted.
6.3. Detection Range and Coverage
The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view ແທນທີ່ຈະໄປຫາມັນໂດຍກົງ.
7. ບໍາລຸງຮັກສາ
7.1. ທໍາຄວາມສະອາດ
Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.
7.2. ການທົດແທນຫມໍ້ໄຟ
When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.
7.3. ກວດກາເປັນປົກກະຕິ
Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.
8. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຊັນເຊີບໍ່ກວດຈັບການເຄື່ອນໄຫວ. |
|
|
| ສັນຍານເຕືອນທີ່ບໍ່ຖືກຕ້ອງ. |
|
|
| LED indicator flashing continuously. | ແບັດເຕີຣີຕໍ່າ. | ປ່ຽນແບັດ. |
| Sensor not communicating with the security system. |
|
|
9. ຂໍ້ມູນຈໍາເພາະ
- ຍີ່ຫໍ້: Intelbras
- ຕົວແບບ: IVP2000SF
- ແຫຼ່ງພະລັງງານ: ພະລັງງານຫມໍ້ໄຟ
- ປະເພດຫມໍ້ໄຟ: ດ່າງ
- ປະເພດການຕິດຕັ້ງ: ຕິດຝາ
- ອຸປະກອນທີ່ເຂົ້າກັນໄດ້: Intelbras security systems and smart home hubs
- ຂະໜາດຜະລິດຕະພັນ: ຂະໜາດປະມານ 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 ນິ້ວ)
- ວິທີການກວດຫາ: Passive Infrared (PIR)
- ໄລຍະການກວດຫາ: ສູງເຖິງ 12 ແມັດ (39 ຟຸດ)
- ມຸມກວດຫາ: ປະມານ 90 ອົງສາ
- ສະພາບແວດລ້ອມການດໍາເນີນງານ: ໃຊ້ພາຍໃນເຮືອນເທົ່ານັ້ນ
10. ຂໍ້ມູນການຮັບປະກັນ
Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webຫຼື ຕິດຕໍ່ຝ່າຍສະໜັບສະໜູນລູກຄ້າຂອງເຂົາເຈົ້າ. ເກັບຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານໄວ້ເພື່ອການຮຽກຮ້ອງການຮັບປະກັນ.
11. ສະຫນັບສະຫນູນ
If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:
- Webເວັບໄຊ: Visit the official Intelbras webເວັບໄຊສໍາລັບຊັບພະຍາກອນສະຫນັບສະຫນູນ, FAQs, ແລະຂໍ້ມູນການຕິດຕໍ່.
- ໂທລະສັບ: Refer to the contact section on the Intelbras webສະຖານທີ່ສໍາລັບຕົວເລກສະຫນັບສະຫນູນທ້ອງຖິ່ນ.
