Hoover ONEPWR Cordless FloorMate Jet Hard Floor Cleaner BH55210A Instruction Manual

1. ຜະລິດຕະພັນເກີນview

The Hoover ONEPWR Cordless FloorMate Jet is a versatile hard floor cleaner designed for efficient cleaning of sealed hard surfaces. This wet vacuum allows you to vacuum and wash your floors simultaneously, offering a streamlined cleaning routine without the need for a power cord. It is suitable for sealed hardwoods, tile, laminate, and refreshing area rugs. The microfiber brush roll gently washes and scrubs to loosen debris, contributing to faster drying times compared to conventional cleaning methods.

Figure 1: Hoover ONEPWR Cordless FloorMate Jet Hard Floor Cleaner.

ຄຸນ​ນະ​ສົມ​ບັດ​ທີ່​ສໍາ​ຄັນ​:

• 2-in-1 ທໍາຄວາມສະອາດ: Vacuums and washes hard floors in one step.
• ຄວາມສະດວກສະບາຍໄຮ້ສາຍ: Powered by a removable and rechargeable ONEPWR 4.0 Ah Battery, offering up to 25 minutes of runtime.
• ການເຮັດຄວາມສະອາດຫຼາຍດ້ານ: Effective on sealed hardwoods, tile, laminate, and area rugs.
• Microfiber Brush Roll: Designed to gently wash, scrub, and aid in faster floor drying.
• ການດູດທີ່ມີອໍານາດ: Efficiently picks up both wet and dry messes.

2. ການຕິດຕັ້ງແລະການປະກອບ

Before first use, ensure all components are present and the battery is fully charged.

2.1 ການສາກແບັດເຕີຣີ

1. Remove the ONEPWR 4.0 Ah Battery from the unit.
2. Connect the battery to the provided charger.
3. Plug the charger into a standard electrical outlet. Allow the battery to charge completely before initial use.

2.2 ການຕື່ມໃສ່ຖັງນໍ້າສະອາດ

1. Locate the clean water tank on the unit.
2. Remove the tank and open the fill cap.
3. Fill the tank with clean water up to the indicated "WATER" line.
4. Add the recommended amount of Hoover cleaning solution (8oz solution included) up to the "SOLUTION" line.
5. Securely close the fill cap and reinsert the tank into the unit.

Figure 2: Clean water tank removed for filling.

3. ຄໍາແນະນໍາການດໍາເນີນງານ

The Hoover ONEPWR Cordless FloorMate Jet is designed for ease of use on various hard floor types.

3.1 ການເປີດເຄື່ອງ ແລະ ການເລືອກໂໝດ

1. Insert the charged ONEPWR battery into its compartment.
2. ກົດປຸ່ມພະລັງງານເພື່ອເປີດຫນ່ວຍບໍລິການ.
3. Select the appropriate cleaning mode for your floor type (e.g., hard floor, area rug) if available.

3.2 Cleaning Hard Floors

1. Gently recline the cleaner to engage the brush roll.
2. Press the "SprayClean" solution control trigger located on the handle to dispense cleaning solution onto the floor.
3. Move the cleaner forward and backward over the area to be cleaned. The unit will vacuum up debris and dirty solution while scrubbing the floor.
4. For heavily soiled areas, you may need to make multiple passes or hold the solution trigger longer.

Figure 3: Cleaning sealed hard floors with the FloorMate Jet.

3.3 Refreshing Area Rugs

The FloorMate Jet can also refresh low-pile area rugs. Ensure the rug is suitable for wet cleaning before proceeding.

1. Select the appropriate mode for area rugs if available.
2. Proceed with cleaning as described for hard floors, using less solution if desired.

Figure 4: Refreshing an area rug with the FloorMate Jet.

4. ບໍາລຸງຮັກສາ

Regular maintenance ensures optimal performance and longevity of your FloorMate Jet.

4.1 ການລ້າງ ແລະທໍາຄວາມສະອາດຖັງນໍ້າເປື້ອນ

1. After each use, turn off the unit and remove the dirty water tank.
2. Carefully empty the dirty water and debris into a sink or toilet.
3. ລ້າງຖັງນ້ໍາເປື້ອນຢ່າງລະອຽດດ້ວຍນ້ໍາສະອາດ.
4. Remove and rinse the filter located on top of the dirty water tank. Allow it to air dry completely before reassembling.
5. Reattach the filter and reinsert the clean dirty water tank into the unit.

Figure 5: Dirty water tank removed for cleaning.

4.2 ການເຮັດຄວາມສະອາດມ້ວນແປງ

1. Ensure the unit is off and the dirty water tank is removed.
2. Open the brush roll cover (refer to diagram in your physical manual for exact location).
3. Remove the microfiber brush roll.
4. Rinse the brush roll under running water to remove any hair or debris.
5. Place the clean brush roll in the provided storage tray to air dry.
6. Once dry, reinsert the brush roll and close the cover.

Figure 6: Brush roll removed for cleaning and storage tray.

5. ການແກ້ໄຂບັນຫາ

If you encounter issues with your Hoover FloorMate Jet, refer to the following common troubleshooting steps:

• ໜ່ວຍ​ງານ​ບໍ່​ເປີດ: Ensure the ONEPWR battery is fully charged and correctly inserted.
• ບໍ່ມີການແກ້ໄຂການແຈກຢາຍ: Check if the clean water tank is filled correctly and securely in place. Ensure the solution trigger is being pressed.
• ການດູດຊຶມບໍ່ດີ: Empty and clean the dirty water tank and its filter. Ensure the brush roll is free of obstructions and properly installed.
• Streaking on Floor: Clean the brush roll thoroughly. Ensure you are using the correct Hoover cleaning solution and not over-saturating the floor.

For further assistance, please contact Hoover customer support.

6. ຂໍ້ມູນຈໍາເພາະ

7. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

For detailed warranty information, product registration, or to purchase replacement parts and accessories, please visit the official Hoover website or contact Hoover customer service directly. Keep your proof of purchase for warranty claims.

Hoover Customer Service: Refer to your product packaging or the official Hoover webເວັບໄຊສໍາລັບຂໍ້ມູນຕິດຕໍ່ໃນປະຈຸບັນຫຼາຍທີ່ສຸດ.