Cisco WS-C2960-48TT-L Catalyst 2960 48-Port Managed Fast Ethernet Switch User Manual

ແນະນຳ

This manual provides instructions for the Cisco WS-C2960-48TT-L Catalyst 2960 48-Port Managed Fast Ethernet Switch. It covers installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

ຂໍ້ມູນຄວາມປອດໄພ

Always follow local and national electrical codes. Ensure proper grounding. Do not operate the switch in wet or excessively humid environments. Disconnect power before cleaning or servicing. Refer to official Cisco documentation for detailed safety guidelines.

ຕັ້ງຄ່າ

1. ການຫຸ້ມຫໍ່

Carefully remove the switch from its packaging. Verify all components are present: the switch unit, power cord, and any included mounting hardware.

2. ການຕິດຕັ້ງທາງດ້ານຮ່າງກາຍ

The Cisco Catalyst 2960 switch is designed for rack-mounting.

Secure the switch in a standard 19-inch equipment rack using the provided rack-mount brackets and screws. Ensure adequate ventilation around the unit.

3. ການເຊື່ອມຕໍ່ພະລັງງານ

ເຊື່ອມຕໍ່ສາຍໄຟເຂົ້າກັບຊ່ອງສຽບໄຟ AC ຢູ່ດ້ານຫຼັງຂອງສະວິດ ແລະ ຈາກນັ້ນເຂົ້າກັບປລັກໄຟຟ້າທີ່ມີສາຍດິນ.

4. ການເຊື່ອມຕໍ່ເຄືອຂ່າຍ

Connect Fast Ethernet devices (computers, servers, other network devices) to the 48 10/100 RJ45 ports on the front panel using standard Ethernet cables.

Utilize the 2 dual-purpose uplink ports for Gigabit copper or fiber connections to connect to your core network or other switches.

For initial configuration, connect a console cable to the console port and a computer running terminal emulation software.

ຮູບພາບ: ທາງຫນ້າ view of the Cisco WS-C2960-48TT-L Catalyst 2960 switch, showing the 48 Fast Ethernet ports and uplink ports.

ປະຕິບັດການ Switch

1. ເປີດເຄື່ອງ

After connecting power, the switch will automatically power on. Observe the system LED indicators for status.

2. ຕົວຊີ້ວັດ LED

• ລະບົບ LED: Green indicates normal operation. Amber indicates a system fault.
• LED ສະຖານະພອດ: Green indicates a link. Blinking green indicates activity. Off indicates no link.

3. Basic Configuration (Cisco IOS)

The switch runs Cisco IOS software. Initial configuration typically involves setting up IP addresses, VLANs, and basic security. This is usually done via the console port or a web interface (if enabled). Refer to the Cisco documentation for detailed IOS configuration guides.

The switch supports Layer 2 switching with static Layer 3 routing capabilities, VLANs, Quality of Service (QoS), and various security features.

ບໍາລຸງຮັກສາ

1. ທໍາຄວາມສະອາດ

Keep the switch clean and free from dust. Use a soft, dry cloth for external cleaning. Do not use liquid cleaners.

2. ອັບເດດເຟີມແວ

ກວດສອບ Cisco ຢ່າງເປັນທາງການເປັນໄລຍະ website for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features. Follow Cisco's instructions for firmware upgrade procedures.

3. ເງື່ອນໄຂສິ່ງແວດລ້ອມ

Ensure the operating environment maintains a temperature below 40 degrees Celsius and appropriate humidity levels to prevent overheating and component damage.

ການແກ້ໄຂບັນຫາ

1. ບໍ່ມີພະລັງງານ

• ກວດສອບໃຫ້ແນ່ໃຈວ່າສາຍໄຟໄດ້ເຊື່ອມຕໍ່ກັບທັງສະວິດ ແລະ ປລັກໄຟຟ້າຢ່າງແໜ້ນໜາແລ້ວ.
• ກວດເບິ່ງປລັກສຽບໄຟກັບອຸປະກອນອື່ນເພື່ອຮັບປະກັນວ່າມັນສາມາດໃຊ້ໄດ້.
• If the System LED is off, contact support.

2. No Network Connectivity on a Port

• Check the cable connection between the device and the switch port.
• Ensure the device connected to the port is powered on and functioning correctly.
• Observe the Port Status LED. If it's off, try a different cable or port.
• Verify the port configuration in the switch's IOS settings.

3. Slow Network Performance

• ກວດສອບການຈະລາຈອນເຄືອຂ່າຍ ຫຼື ການວົນຊ້ຳຫຼາຍເກີນໄປ.
• ຮັບປະກັນວ່າສາຍໄຟທັງໝົດຢູ່ໃນສະພາບດີ ແລະ ເຊື່ອມຕໍ່ຢ່າງຖືກຕ້ອງ.
• Review QoS settings if configured.

ຂໍ້ມູນຈໍາເພາະ

ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

This product is sold as an Amazon Renewed item. Renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee if not satisfied with the purchase.

For specific technical support, refer to the official Cisco support resources and documentation available on their website. For issues related to your Amazon Renewed purchase, please contact Amazon customer service or the seller, Global Phone Supply.