ຫົວ LED ANSMANN HD70Bamp ຄູ່ມືຜູ້ໃຊ້

1. ບົດແນະນຳ

Thank you for choosing the ANSMANN HD70B LED Headlamp. This manual provides essential information for the safe and efficient use of your headlamp. Please read it thoroughly before operation and retain it for future reference.

The ANSMANN HD70B is a versatile and lightweight lighting solution, designed for various activities such as camping, emergencies, work, reading, boating, sports, and cycling. Its robust, splash-proof (IP44) casing ensures durability in diverse environments. Constructed from durable ABS plastic, the headlamp weighs only 66g (including battery), providing optimal comfort for extended wear. The adjustable elastic headband ensures a secure and comfortable fit for both children and adults. The lamp's tilt angle can be adjusted up to 45° for precise illumination.

ເນື້ອໃນຊຸດ:

• 1 x ANSMANN HD70B LED Headlamp (ແບບ 1600-0260)
• 1 x AA Mignon Battery
• 1 x ຄູ່ມືຜູ້ໃຊ້

2. ຄໍາແນະນໍາຄວາມປອດໄພ

• ຢ່າເບິ່ງໂດຍກົງເຂົ້າໄປໃນ beam ແສງສະຫວ່າງ LED.
• ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
• ຢ່າຜະສົມແບດເຕີຣີເກົ່າແລະໃຫມ່, ຫຼືແບດເຕີລີ່ປະເພດຕ່າງໆ.
• ເອົາແບັດເຕີລີອອກຖ້າຫົວamp ຈະບໍ່ຖືກນໍາໃຊ້ເປັນເວລາດົນນານເພື່ອປ້ອງກັນການຮົ່ວໄຫຼ.
• ຖິ້ມແບດເຕີລີ່ຕາມກົດລະບຽບທ້ອງຖິ່ນ.
• ຫົວamp is IP44 splash-proof; do not immerse it in water.

3. ຕັ້ງຄ່າ

3.1 ການຕິດຕັ້ງຫມໍ້ໄຟ

1. Locate the battery compartment on the back of the headlamp ໜ່ວຍ.
2. Carefully open the battery compartment cover. This typically involves sliding a latch or gently prying open a tab. If you encounter resistance, ensure no screws are present and apply gentle, even pressure.
3. Insert one AA Mignon battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. ປິດຝາປິດຊ່ອງໃສ່ແບັດໄວ້ຢ່າງປອດໄພຈົນກວ່າມັນຈະກົດໃສ່ບ່ອນ.

Figure 1: The ANSMANN HD70B LED Headlamp. The battery compartment is located on the rear of the main light unit.

3.2 ການປັບສາຍແອວ

The elastic headband is adjustable to fit various head sizes. Slide the buckles on either side of the headband to achieve a comfortable and secure fit.

3.3 ການປັບມຸມອຽງ

ຫົວamp unit can be tilted up to 45° to direct the light beam precisely where needed. Gently push or pull the light unit to adjust its angle.

Figure 2: The headlamp features a 45° swivel joint for adjustable light direction.

4. ການດໍາເນີນງານ

ຫົວamp is operated via a single button located on the top of the unit.

4.1 Powering On/Off and Switching Modes

• ກົດທຳອິດ: Activates the Main LED at 100% power (65 lumens). This mode provides a strong, long-range beam.
• ກົດທີສອງ: Switches to Main LED at 25% power (16 lumens). This mode offers extended battery life with sufficient illumination for close-range tasks.
• ກົດທີສາມ: Activates the Auxiliary LEDs (12 lumens). This mode provides a wider, softer light for peripheral vision and close-up work.
• ຂ່າວ​ທີ​ສີ່​: ຫັນຫົວamp ປິດ.

ຫົວamp is also dimmable, allowing for fine-tuning of light output within each mode by holding the button (specific dimming instructions may vary slightly; refer to practical use).

Figure 3: The headlamp is IP44 splash-proof and features a powerful LED.

5. ບໍາລຸງຮັກສາ

5.1 ການທໍາຄວາມສະອາດ

ເຊັດຫົວamp ມີອ່ອນ, damp cloth. Do not use abrasive cleaners or solvents. Ensure the battery compartment is dry before closing.

5.2 ການທົດແທນຫມໍ້ໄຟ

When the light output becomes dim or the headlamp stops functioning, replace the AA battery following the instructions in Section 3.1. Always use a fresh, high-quality AA battery.

5.3 ການເກັບຮັກສາ

ເກັບຮັກສາຫົວamp in a cool, dry place. If storing for an extended period, remove the battery to prevent potential leakage and damage to the device.

6. ການແກ້ໄຂບັນຫາ

• ຫົວamp ບໍ່ເປີດ:
  • ກວດສອບວ່າແບັດເຕີຣີຖືກໃສ່ຢ່າງຖືກຕ້ອງດ້ວຍຂົ້ວທີ່ຖືກຕ້ອງຫຼືບໍ່.
  • Ensure the battery compartment cover is fully closed.
  • ປ່ຽນແບັດໃໝ່.
• Difficulty opening the battery compartment:
  • Ensure you are not forcing it. Look for a small latch or a designated sliding area. Some compartments require a firm but gentle slide or a slight prying motion with a fingernail or small, flat tool at a specific point. Refer to any diagrams on the product packaging if available.
• ຜົນ​ຜະ​ລິດ​ແສງ​ສະ​ຫວ່າງ​:
  • The battery may be low. Replace it with a fresh AA battery.
  • ຮັບປະກັນຫົວamp is not in a lower power mode (e.g., Main LED 25% or Auxiliary LEDs). Cycle through the modes to check.

7. ຂໍ້ມູນຈໍາເພາະ

8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ANSMANN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official ANSMANN webເວັບໄຊ. ກະລຸນາຮັກສາຫຼັກຖານການຊື້ຂອງທ່ານສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.