ສິນຄ້າເກີນview
The Cisco 562 Headset is a wireless DECT 6.0 stereo headset designed for professional use, offering clear audio and comfortable wear. It features an over-the-head, binaural design with supra-aural ear placement and a uni-directional electret condenser microphone. This manual provides essential information for setting up, operating, and maintaining your headset.
Image: Cisco 562 Wireless DECT Headset with its charging base. The headset is gray and black, featuring an adjustable headband and a microphone boom. The charging base has LED indicators for battery status.
ຕັ້ງຄ່າ
1. ການສາກຫູຟັງ
Place the Cisco 562 Headset onto its charging base. Ensure the headset is properly seated for charging. The LED indicators on the base will illuminate to show the charging status. A fully charged headset will display all indicators lit.
2. ການປັບຊຸດຫູຟັງ
The headset features an adjustable headband for a comfortable fit. Extend or retract the headband as needed. The microphone boom is also adjustable and can be positioned for optimal voice pickup.
ຄໍາແນະນໍາການດໍາເນີນງານ
ການຄວບຄຸມປະລິມານ
Locate the volume control buttons on the headset earcup. Press the '+' button to increase volume and the '-' button to decrease volume.
ຟັງຊັນປິດສຽງ
A dedicated mute button is available on the headset for quickly muting or unmuting your microphone during calls.
ຮັບ/ສາຍໂທ
Use the call control button on the headset to answer incoming calls or end active calls.
ສະດວກສະບາຍແລະເຫມາະ
The headset is designed for extended wear with comfortable ear cushions and an adjustable fit. Ensure the headset is positioned correctly on your head for maximum comfort and sound isolation.
ບໍາລຸງຮັກສາ
To ensure the longevity and optimal performance of your Cisco 562 Headset, follow these general maintenance guidelines:
- Keep the headset and charging base clean using a soft, dry cloth.
- ຫຼີກເວັ້ນການເປີດຫູຟັງກັບອຸນຫະພູມທີ່ຮຸນແຮງ, ຄວາມຊຸ່ມຊື່ນ, ຫຼືແສງແດດໂດຍກົງ.
- Store the headset on its charging base when not in use to maintain battery health.
- ຢ່າພະຍາຍາມຖອດ ຫຼື ສ້ອມແປງຊຸດຫູຟັງດ້ວຍຕົນເອງ, ເພາະມັນອາດຈະເຮັດໃຫ້ການຮັບປະກັນເປັນໂມຄະ.
ການແກ້ໄຂບັນຫາ
If you encounter issues with your Cisco 562 Headset, consider the following general troubleshooting steps:
- ບໍ່ມີສຽງ: Ensure the headset is powered on and properly connected to your device. Check volume settings on both the headset and the connected device.
- ໄມໂຄຣໂຟນບໍ່ເຮັດວຽກ: Verify the microphone is not muted. Check microphone settings on your connected device.
- ບັນຫາການເຊື່ອມຕໍ່: Ensure the headset is within the wireless operating range (up to 300 ft). Re-pair the headset with your device if necessary.
- ບັນຫາຄຸນນະພາບການໂທ: For call quality problems, ensure your connected device's software and the headset's firmware are up to date. Refer to Cisco's official support resources for advanced diagnostics.
ຂໍ້ມູນຈໍາເພາະ
| ຍີ່ຫໍ້ | ຊິສໂກ |
| ຕົວແບບ | 562 |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | ໄຮ້ສາຍ (DECT 6.0) |
| ໄລຍະການໃຊ້ງານໄຮ້ສາຍ | 300 ຟຸດ |
| ໂໝດສຽງ | ສະເຕຣິໂອ |
| ການຕອບສະໜອງຄວາມຖີ່ສູງສຸດ | 48 kHz |
| ການຈັດວາງຫູ | On Ear (Supra-aural) |
| ປັດໄຈແບບຟອມ | Over-The-Head, Binaural |
| ປະເພດໄມໂຄຣໂຟນ | Uni-Directional, Electret, Condenser |
| impedance | 90 ໂອມ |
| ສີ | ດຳ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For detailed warranty information, technical support, and additional resources, please refer to the documentation included with your product or visit the official Cisco support website. Specific warranty terms and support options may vary by region and product registration.
ທ່ານສາມາດໄປຢ້ຽມຢາມໄດ້ Cisco Store ສໍາລັບຂໍ້ມູນເພີ່ມເຕີມຜະລິດຕະພັນ.