1. ບົດແນະນຳ
Thank you for choosing the YOSE POWER 36V 10.4Ah Ebike Battery. This manual provides essential information for the safe and efficient use, installation, operation, and maintenance of your new battery. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Figure 1.1: YOSE POWER 36V 10.4Ah Ebike Battery
This image shows the main product, a black rectangular ebike battery with a power indicator and switch on one end.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
To prevent injury, damage to the product, or property damage, always observe the following safety precautions:
- ການເກັບຮັກສາ: Store the battery in a cool, dry place. Do not expose the product to fire, water, or excessive moisture.
- ອຸນຫະພູມ: Avoid extreme temperatures. Do not charge or use the battery in direct sunlight or in very hot or cold environments.
- ຜົນກະທົບ: Protect the battery from physical impact and drops. The battery features drop protection, but severe impacts can still cause damage.
- ການຖອດອອກໄດ້: Do not attempt to disassemble, open, or service the battery pack. This can lead to electric shock, fire, or explosion.
- ການສາກໄຟ: Use only the charger provided or a charger specifically approved by YOSE POWER for this battery. Overcharging or using an incompatible charger can be dangerous.
- ວົງຈອນສັ້ນ: ຫຼີກເວັ້ນການວົງຈອນສັ້ນຂອງສະຖານີຫມໍ້ໄຟ.
- ເດັກນ້ອຍ: ຮັກສາແບັດເຕີຣີໃຫ້ໄກຈາກເດັກນ້ອຍ.
- ການຖິ້ມຂີ້ເຫຍື້ອ: Dispose of the battery according to local regulations. Do not dispose of it in household waste or fire.
3. ຜະລິດຕະພັນເກີນview
The YOSE POWER Ebike Battery is designed for reliable performance and durability. It features an intelligent Battery Management System (BMS) to protect against overcharge, over-discharge, overcurrent, and short circuits.
3.1. ເນື້ອໃນຊຸດ
ເມື່ອເປີດແພັກເກັດ, ໃຫ້ແນ່ໃຈວ່າທຸກລາຍການມີຢູ່:
- YOSE POWER Ebike Battery Pack (36V 10.4Ah)
- Battery Charger (42V 2A)
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ຮູບທີ 3.1: ເນື້ອໃນຊຸດ
This image displays the battery pack, the charger, and the user manual, which are included in the product package.
3.2. ຄຸນນະສົມບັດທີ່ສໍາຄັນແລະອົງປະກອບ
Figure 3.2: Battery Dimensions and Key Features
This diagram illustrates the battery's dimensions (318mm x 126mm x 44mm) and highlights its core features: BMS protection, drop protection, waterproof/dustproof design, 1000+ cycle life, 36V voltage, 10.4Ah capacity, 2.8kg weight, 385Wh energy, 6 hours charge time, and compatibility with up to 36V 500W motors.
ຮູບທີ 3.3: ການອອກແບບກັນນ້ຳ
This image shows the battery being splashed with water, demonstrating its waterproof capability.
Figure 3.4: Internal Battery Cells
ໃກ້ຊິດ view of the individual lithium-ion battery cells, highlighting the quality of the internal components.
4. ຕັ້ງຄ່າ
4.1. ການສາກໄຟເບື້ອງຕົ້ນ
Before first use, fully charge the battery. Connect the charger to the battery's charge socket and then plug the charger into a power outlet. The charger's indicator light will show the charging status. Once fully charged, disconnect the charger.
4.2. Installation on E-bike
This battery is designed for compatibility with various e-bikes, including Mifa, Rehberg, Zündapp, and Ansmann systems. Ensure the battery dimensions (318x126x44 mm) are suitable for your e-bike's battery compartment before installation. Refer to your e-bike's manual for specific installation instructions.
Figure 4.1: Battery Compatibility Check
This image provides a visual guide for checking battery length (318mm vs 245mm) and top section height (113mm vs 43mm) to ensure proper fit and compatibility with your e-bike.
5. ຄໍາແນະນໍາການດໍາເນີນງານ
5.1. ເປີດ / ປິດພະລັງງານ
To turn the battery on or off, press the power switch located on the side of the battery. Ensure the battery is switched on before operating your e-bike.
Figure 5.1: Power Switch and Discharge Socket
This image shows a close-up of the battery's power switch (circular button) and the discharge socket, which connects the battery to the e-bike's motor. The discharge socket specifications are also detailed: Standard Current: 10A, Max. Continuous Current: 20A, Protect Current: 50A, End Voltage: 28V.
5.2. ການກວດສອບລະດັບຫມໍ້ໄຟ
The battery is equipped with a power indicator light. Press the dedicated button next to the indicator lights to visually check the battery's charge level. When fully charged, it displays 1 red light and 3 green lights. When only the last red light appears, the battery charge is low and requires recharging.
Figure 5.2: Battery Level Indicator and Charge Socket
ຮູບພາບນີ້ສະແດງໃຫ້ເຫັນພາບໃກ້ໆ views of the battery's power level indicator lights and the charge socket. It explains how to check the battery level and notes that the charge current for this socket should not exceed 5 amps.
5.3. ການສາກແບັດເຕີຣີ
Connect the 42V 2A charger to the battery's charge socket. The charge current for this socket should not exceed 5 amps. A full charge typically takes approximately 6 hours. Always ensure the charger is disconnected once charging is complete.
6. ບໍາລຸງຮັກສາ
Proper maintenance ensures the longevity and performance of your battery:
- ການສາກໄຟປົກກະຕິ: Even if not in regular use, charge the battery at least once every three months to maintain cell health.
- ທໍາຄວາມສະອາດ: Keep the battery and its terminals clean and dry. Use a soft, dry cloth to wipe off any dust or dirt.
- ການເກັບຮັກສາ: For long-term storage, store the battery in a cool, dry place, ideally at around 50% charge. Avoid storing in extreme temperatures.
- ຫຼີກເວັ້ນການໄຫຼເລິກ: Do not allow the battery to fully discharge frequently, as this can reduce its lifespan. Recharge promptly when the low battery indicator appears.
7. ການແກ້ໄຂບັນຫາ
If you encounter issues with your YOSE POWER Ebike Battery, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ແບັດເຕີຣີບໍ່ໄດ້ສາກ | Charger not connected properly; Charger faulty; Battery deeply discharged; Power outlet issue. | Ensure secure connections. Test charger with another device if possible. Try a different power outlet. If deeply discharged, leave connected for a longer period. If problem persists, contact support. |
| Battery not powering e-bike | Battery switched off; Battery discharged; Loose connection to e-bike; E-bike system issue. | Ensure battery is switched on. Check battery level and recharge if necessary. Verify secure connection between battery and e-bike. Consult e-bike manual for system troubleshooting. |
| ໄຟຕົວຊີ້ວັດຫມໍ້ໄຟບໍ່ເຮັດວຽກ | Button not pressed; Battery completely discharged; Internal fault. | Press the indicator button firmly. Charge the battery. If still unresponsive after charging, contact support. |
If the issue persists after attempting these solutions, please contact YOSE POWER customer support for further assistance.
8. ຂໍ້ມູນຈໍາເພາະ
Detailed technical specifications for the YOSE POWER 36V 10.4Ah Ebike Battery:
| ຂໍ້ມູນຈໍາເພາະ | ມູນຄ່າ |
|---|---|
| ໝາຍເລກຕົວແບບ | AE36V10.4Ah |
| ປະເພດຫມໍ້ໄຟ | ລິດທຽມ-ໄອອອນ |
| ປະລິມານນາມtage | 36 ໂວນ |
| ຄວາມອາດສາມາດ | 10.4 Ah (10,400 mAh) |
| ພະລັງງານ | 385 ວ |
| ປັດຈຸບັນການປ່ອຍນ້ໍາຢ່າງຕໍ່ເນື່ອງ | 20A |
| Protect Current | 50A |
| End Voltage | 28V |
| Recommended Motor Power | 250W / 350W / 500W |
| Charger Output | 42V 2A |
| ເວລາສາກໄຟ | ປະມານ. 6 ຊົ່ວໂມງ |
| ຂະໜາດ (L x W x H) | 318 x 126 x 44 ມມ (12.5 x 4.9 x 1.7 ນິ້ວ) |
| ນ້ຳໜັກ | 2.8 ກິໂລ (6.17 ປອນ) |
| ວົງຈອນຊີວິດ | 1000+ ຮອບວຽນ |
| ຄຸນນະສົມບັດພິເສດ | Lightweight, BMS Protection, Drop Protection, Waterproof, Dustproof |
| ການຢັ້ງຢືນ | CE, ROHS, UN38.3 |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
YOSE POWER stands behind the quality of its products.
- ການຮັບປະກັນຫມໍ້ໄຟ: 18 ເດືອນນັບຈາກວັນທີຊື້.
- Charger Warranty: 12 ເດືອນນັບຈາກວັນທີຊື້.
- ນະໂຍບາຍການສົ່ງຄືນ: 30 days no-reason return from the date of purchase.
All batteries undergo QC testing before leaving the factory to ensure quality. If your battery is outside the warranty period, technical support and accessory purchases are still available.
For technical assistance, warranty claims, or any other inquiries, please contact YOSE POWER customer support through the retailer or official webເວັບໄຊ.
