1. ບົດແນະນຳ
ຂອບໃຈສໍາລັບການຊື້asing the lightmaXX Nano PAR FX 3x 4 W LED RGBW. This compact and powerful LED PAR spot is designed for various lighting applications, offering vibrant RGBW color mixing and dynamic strobe effects. This manual provides essential information for safe operation, setup, and maintenance of your device. Please read it thoroughly before use.
Figure 1: lightmaXX Nano PAR FX LED PAR Spot
2. ຄໍາແນະນໍາຄວາມປອດໄພ
To ensure safe operation, please observe the following safety instructions:
- ການສະຫນອງພະລັງງານ: Connect the device only to a grounded power outlet with the correct voltage (230V AC).
- ການລະບາຍອາກາດ: ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍຢູ່ອ້ອມໜ່ວຍ. ຫ້າມປິດຊ່ອງລະບາຍອາກາດ.
- ຄວາມຊຸ່ມ: Do not expose the device to rain or moisture. Do not use it in damp ສະພາບແວດລ້ອມ.
- ອຸນຫະພູມ: Operate the device within the specified temperature range. Avoid extreme heat or cold.
- ການຈັດການ: ຈັດການອຸປະກອນດ້ວຍຄວາມລະມັດລະວັງ. ຫຼີກລ້ຽງການຫຼຸດລົງຫຼືຮັບມັນກັບຜົນກະທົບທີ່ເຂັ້ມແຂງ.
- ບໍາລຸງຮັກສາ: ໃຫ້ສົ່ງຕໍ່ການບໍລິການທັງໝົດໄປຫາພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ. ຢ່າພະຍາຍາມສ້ອມແປງເຄື່ອງດ້ວຍຕົນເອງ.
- ແສງອອກ: Avoid looking directly into the light source, as it can cause eye damage.
3. ຕັ້ງຄ່າ
3.1 ການຈັດວາງທາງດ້ານຮ່າງກາຍ
The lightmaXX Nano PAR FX is designed as a floor spot but can also be mounted using its adjustable bracket. Ensure the mounting surface or location is stable and can support the weight of the fixture. Allow sufficient space around the unit for proper ventilation.
3.2 ການເຊື່ອມຕໍ່
Connect the power cable to a suitable power outlet. For DMX control, connect a DMX cable from your DMX controller to the DMX IN port of the fixture. If linking multiple units, connect a DMX cable from the DMX OUT port of the first fixture to the DMX IN port of the next, and so on.
Figure 2: Rear panel with DMX ports and control display
4. ຄໍາແນະນໍາການດໍາເນີນງານ
4.1 ກະດານຄວບຄຸມ
The rear panel features a digital display and four control buttons: MENU, UP, DOWN, and ENTER. These buttons allow you to navigate through the settings and select various operating modes.
- ເມນູ: ກົດເພື່ອຮອບວຽນຜ່ານຕົວເລືອກເມນູຫຼັກ.
- ຂຶ້ນ: Increases values or moves up in menu options.
- ລົງ: Decreases values or moves down in menu options.
- ຕື່ມ: ຢືນຢັນການເລືອກ ຫຼືໃສ່ເມນູຍ່ອຍ.
4.2 ການຄວບຄຸມໄລຍະໄກ
The lightmaXX Nano PAR FX comes with an infrared (IR) remote control for convenient operation. Ensure there is a clear line of sight between the remote and the fixture's IR receiver.
Figure 3: Product with Remote Control
4.3 ຮູບແບບການໃຊ້ງານ
The fixture offers several built-in operating modes, accessible via the control panel or remote:
- ແບບອັດຕະໂນມັດ: Cycles through pre-programmed light shows automatically.
- ແບບສຽງ: Reacts to music or sound via a built-in microphone.
- ໂໝດໂດດ: Changes colors abruptly.
- ໂໝດຈືດໆ: ການປ່ຽນສີຢ່າງລຽບງ່າຍ.
- ໂໝດ Strobe: Produces a flashing light effect.
4.4 Color Mixing
The Nano PAR FX features RGBW LEDs, allowing for a wide spectrum of colors. You can select individual colors or mix them to create custom hues using the remote control or DMX.
ຮູບທີ 4: ຕົວຢ່າງamples of color outputs
Red Light Output
Green Light Output
4.5 ການດໍາເນີນງານ DMX
For professional control, the Nano PAR FX can be operated via DMX512. Set the DMX address using the control panel. Consult the DMX channel chart (typically found in a separate DMX manual or product sheet) for specific channel assignments for color, dimming, strobe, and mode control.
5. ບໍາລຸງຮັກສາ
5.1 ການທໍາຄວາມສະອາດ
Regular cleaning helps maintain optimal performance and extends the lifespan of your fixture.
- ຕັດການເຊື່ອມຕໍ່ໄຟກ່ອນທີ່ຈະທໍາຄວາມສະອາດ.
- ໃຊ້ຜ້າອ່ອນໆທີ່ບໍ່ມີຂົນເຊັດດ້ານນອກ.
- For lenses, use a specialized lens cleaner and a soft cloth to avoid scratches.
- ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
5.2 ການເກັບຮັກສາ
ເມື່ອບໍ່ໄດ້ໃຊ້, ໃຫ້ເກັບຮັກສາອຸປະກອນດັ່ງກ່າວໄວ້ໃນສະພາບແວດລ້ອມທີ່ແຫ້ງ, ບໍ່ມີຂີ້ຝຸ່ນ, ດີກວ່າຢູ່ໃນການຫຸ້ມຫໍ່ຕົ້ນສະບັບຂອງມັນຫຼືກໍລະນີປ້ອງກັນ.
6. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີພະລັງງານ | ສາຍໄຟຖືກຕັດຂາດ; ບໍ່ມີໄຟຟ້າຈາກປລັກສຽບ; ຟິວມີບັນຫາ. | Check power cable connection; test outlet; replace fuse if necessary. |
| ບໍ່ມີຜົນຜະລິດແສງສະຫວ່າງ | Fixture in standby; incorrect mode selected; DMX signal issue. | Check power and mode settings; verify DMX connection and address. |
| ການຄວບຄຸມໄລຍະໄກບໍ່ເຮັດວຽກ | Battery low/dead; IR receiver blocked; too far from fixture. | Replace battery; ensure clear line of sight; move closer to fixture. |
| DMX control issues | ທີ່ຢູ່ DMX ບໍ່ຖືກຕ້ອງ; ສາຍ DMX ຜິດປົກກະຕິ; ບັນຫາຕົວຄວບຄຸມ DMX. | Verify DMX address; test DMX cable; check DMX controller. |
7. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຍີ່ຫໍ້ | lightmaXX |
| ຜູ້ຜະລິດ | lightmaXX |
| ໝາຍເລກຕົວແບບ | LIG0015652-000 |
| ຂະໜາດສິນຄ້າ (L x W x H) | 12.9 x 12.9 x 12.8 cm |
| ນ້ໍາຫນັກລາຍການ | 620 ກຣາມ |
| ແບບ | ທັນສະໄຫມ |
| ສີ | Black (fixture), RGBW (light output) |
| Watts ສູງສຸດ | 20 ວັດ |
| ສະບັບtage | 230 ໂວນ (AC) |
| ປະເພດດອກໄຟ | ໄດໂອດປ່ອຍແສງ (LED) |
| ປະເພດແຫຼ່ງແສງ | Diode électroluminescente (LED) |
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This product is subject to the standard return policy of 30 days from the date of purchase. For technical support, service, or warranty inquiries, please contact your retailer or the lightmaXX customer service department. Please have your model number (LIG0015652-000) and proof of purchase ready when contacting support.
