ແນະນຳ
The DieHard DH137 is a 10A 12V battery charger designed for use with standard, AGM, and Gel batteries. This device is engineered to monitor and maintain the battery's charge level, automatically resuming charging if the battery's voltage drops. Key features include reverse hook-up protection, multi-stage charging for enhanced precision and safety, and extended battery life. It comes equipped with 50 Amp clamps suitable for both top-mount and side-mount battery posts.
ຂໍ້ມູນຄວາມປອດໄພທີ່ສໍາຄັນ
ອ່ານ ແລະເຂົ້າໃຈຄຳເຕືອນຄວາມປອດໄພທັງໝົດ ແລະຄຳແນະນຳກ່ອນນຳໃຊ້ຜະລິດຕະພັນນີ້ສະເໝີ. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ໄຟຟ້າຊ໊ອກ, ໄຟໄຫມ້, ຫຼືບາດເຈັບສາຫັດ.
- ໃຊ້ພຽງແຕ່ໃນພື້ນທີ່ລະບາຍອາກາດໄດ້ດີ.
- ໃສ່ເຄື່ອງປ້ອງກັນຕາແລະເຄື່ອງປ້ອງກັນເມື່ອເຮັດວຽກກັບແບັດເຕີຣີ.
- ຮັກສາໃຫ້ໄກຈາກເດັກນ້ອຍ.
- ຢ່າເຮັດໃຫ້ເຄື່ອງສາກຖືກtoົນຕົກຫຼືໃນສະພາບທີ່ຊຸ່ມ.
- Ensure the charger is disconnected from the power supply before making or breaking connections to the battery.
- Avoid dropping metal tools onto the battery. This could short-circuit the battery or other electrical parts, which may cause an explosion.
- This charger is not intended for use as a power supply.
ສິນຄ້າເກີນview
Figure 1: The DieHard DH137 10 Amp Battery Charger, showcasing its main unit and the red and black 50 Amp clamps.
ຮູບທີ 2: ເປັນມຸມ view of the DieHard DH137 charger, highlighting its compact design and integrated handle.
The DieHard DH137 features a robust casing with a clear control panel. The panel includes LED indicators for charging status, battery maintenance, reverse hook-up, and bad battery detection. A prominent START/STOP button controls the charging process. The unit is equipped with heavy-duty 50 Amp clamps for secure connection to battery terminals.
- ຕົວຊີ້ວັດ LED: Provide visual feedback on the charging status (Charging, Charged/Maintaining, Clamps Reversed, Bad Battery).
- ປຸ່ມ START/STOP: Initiates and terminates the charging cycle.
- 50 Amp Clamps: ທົນທານ clamps for connecting to battery posts.
- ພອດ USB: For charging small electronic devices (2.1A MAX).
ຕັ້ງຄ່າ
Before connecting the charger, ensure the battery terminals are clean and free of corrosion. Position the charger on a stable, non-flammable surface away from the battery to allow for proper ventilation.
- Verify the battery type (Standard, AGM, Gel) matches the charger's capabilities.
- Ensure the charger's AC power cord is unplugged from the electrical outlet.
- ເຊື່ອມຕໍ່ສີແດງບວກ (+) clamp ໄປຫາສະຖານີຫມໍ້ໄຟບວກ (+).
- ເຊື່ອມຕໍ່ທາງລົບສີດໍາ (-) clamp to the negative (-) battery terminal. If connecting to a vehicle, connect the negative clamp to the vehicle chassis or engine block, away from the battery and fuel line.
- Confirm all connections are secure.
ຄໍາແນະນໍາການດໍາເນີນງານ
Figure 3: The DieHard DH137 charger positioned on the engine bay of a vehicle, ready for connection.
Figure 4: A user connecting the red positive clamp of the DieHard DH137 to the positive terminal of a car battery.
The DieHard DH137 features fully automatic, microprocessor-controlled charging. Once connected, it will assess the battery and begin the appropriate charging stage.
- ເຊື່ອມຕໍ່ກັບພະລັງງານ: Plug the charger's AC power cord into a standard 120V AC electrical wall outlet.
- ເລີ່ມການສາກໄຟ: ກົດ ເລີ່ມ/ຢຸດ button. The charger will begin its diagnostic and charging cycle.
- ຕິດຕາມສະຖານະ: Observe the LED indicators:
- Solid green LED: Indicates the battery is fully charged and in maintenance mode.
- Solid yellow LED: Indicates charging is in progress.
- Flashing red LED: Indicates reverse hook-up. Disconnect and re-connect clamps ຢ່າງຖືກຕ້ອງ.
- Solid red LED: Indicates a bad battery.
- Multi-Stage ການສາກໄຟ: The charger automatically progresses through various stages (desulfation, bulk charge, absorption, float) to optimize battery performance and longevity.
- Reverse Hook-up Protection: ຖ້າ clamps are connected incorrectly, the charger will not operate and the red LED will flash, preventing damage to the battery or charger.
- ການສາກ USB: To use the USB port, plug your device into the USB port. The USB ON/OFF and Battery Status LED will illuminate. When finished, press the button to turn off the USB.
- ສໍາເລັດ: Once the green LED is solid, the battery is fully charged. You may leave the charger connected for long-term maintenance.
- ກຳລັງຕັດການເຊື່ອມຕໍ່: First, unplug the AC power cord from the outlet. Then, disconnect the negative (-) clamp, ຕາມດ້ວຍ cl ບວກ (+)amp.
ໝາຍເຫດສຳຄັນ:
- The charger will automatically monitor and maintain the battery when fully charged, resuming continuous charging if the battery becomes discharged.
- This unit is a battery charger/maintainer, not a jump starter. It is designed for charging over time, not for instant starting of a dead battery.
ບໍາລຸງຮັກສາ
Proper maintenance ensures the longevity and optimal performance of your DieHard DH137 battery charger.
- ທໍາຄວາມສະອາດ: Disconnect the charger from all power sources and batteries before cleaning. Wipe the case and clamps with a dry cloth. Do not use solvents or abrasive cleaners.
- ການເກັບຮັກສາ: Store the charger in a cool, dry place when not in use. Ensure the clamps are clean and not touching each other.
- ການດູແລສາຍໄຟ: Inspect the AC power cord and battery cables for any damage (cuts, fraying, exposed wires) before each use. Do not use the charger if any cables are damaged.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ເຄື່ອງສາກບໍ່ເປີດ. | ບໍ່ມີໄຟ AC; faulty outlet; ຄວາມຜິດພາດພາຍໃນ. | Check AC outlet; ensure charger is properly plugged in. If problem persists, contact support. |
| Flashing red LED (Clamps Reversed). | ຫມໍ້ໄຟ clamps ຖືກເຊື່ອມຕໍ່ບໍ່ຖືກຕ້ອງ. | Disconnect AC power, then disconnect clamps. Re-connect red clamp ເປັນບວກ (+) ແລະ cl ສີດໍາamp ເປັນລົບ (-). |
| Solid red LED (Bad Battery). | Battery is severely sulfated, short-circuited, or damaged. | The charger cannot charge this battery. Have the battery professionally tested or replaced. |
| Charger not reaching full charge (green LED). | Battery is very large, deeply discharged, or has internal issues. | Allow more time for charging. If it never reaches full charge, the battery may be compromised. |
ຂໍ້ມູນຈໍາເພາະ
- ຍີ່ຫໍ້: DieHard
- ຕົວແບບ: DH137
- ຜົນໄດ້ຮັບ Voltage: 12 ໂວນ
- ກຳລັງສາກໄຟ Ampອາຍຸ: 10 Amp
- ປະເພດຫມໍ້ໄຟທີ່ເຂົ້າກັນໄດ້: Standard, AGM, Gel
- ນ້ໍາຫນັກລາຍການ: 1.6 ອອນ
- ຂະໜາດຜະລິດຕະພັນ: 8.75 x 4.75 x 9.5 ນິ້ວ
- ຜູ້ຜະລິດ: ບໍລິສັດໄຟຟ້າ Schumacher
- ຄຸນສົມບັດ: ຫຼາຍ stage charging, Reverse hook-up protection, LED indicators, USB charging port.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For detailed warranty information, please refer to the warranty card included with your product or visit the official DieHard webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້ສໍາລັບການຮຽກຮ້ອງການຮັບປະກັນໃດໆ.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Schumacher Electric Corp. customer service. Contact details can typically be found in the product packaging or on the manufacturer's webເວັບໄຊ.
Note: The provided JSON data includes information about optional protection plans (2-Year Protection Plan, 3-Year Protection Plan, Complete Protect) which are separate from the manufacturer's standard product warranty. Please consult the terms and conditions of these plans for details.
