ແນະນຳ
The BOYA BY-BM3031 is a broadcast-quality supercardioid condenser shotgun microphone designed to capture clear, high-quality audio. It is suitable for use with DSLRs, camcorders, and audio recorders, making it ideal for videographers, sound designers, and film producers in various indoor and outdoor recording scenarios.
This manual provides detailed instructions on the setup, operation, maintenance, and troubleshooting of your BY-BM3031 microphone to ensure optimal performance and longevity.
ເນື້ອໃນຊຸດ
Upon unboxing your BOYA BY-BM3031, please verify that all the following components are included:
- ໄມໂຄຣໂຟນ BY-BM3031
- ແວ່ນກັນລົມໂຟມ
- Fur Windscreen (Windjammer)
- ກະເປົາຖື
- ຄູ່ມືຜູ້ໃຊ້ (ເອກະສານນີ້)
ຫມາຍເຫດ: ສອງຫມໍ້ໄຟ AA ແມ່ນຕ້ອງການສໍາລັບການດໍາເນີນງານແລະຖືກຂາຍແຍກຕ່າງຫາກ.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ
- ຮູບແບບຂົ້ວໂລກ Supercardioid: Focuses audio capture directly in front of the microphone, reducing side and rear noise.
- Three-level Gain Switch: Provides options for +20 dB boost, 0 dB unity gain, or -10 dB pad to prevent distortion from audio overload.
- Switchable High-Pass Filter (80 Hz): Helps to roll off unwanted low-frequency noise and rumble, such as air conditioning or traffic sounds.
- ຕົວຍຶດຊັອກແບບປະສົມປະສານ: Designed to eliminate vibrations and handling noise, ensuring cleaner audio recordings.
- 1/8" (3.5 mm) Headphone Monitor Jack: Allows real-time audio monitoring directly from the microphone, preventing recording errors.
- ການກໍ່ສ້າງ ABS ທົນທານ: Ensures robust and long-lasting performance.
- ພະລັງງານຫມໍ້ໄຟ: Operates on two AA batteries for portable use.
ຄູ່ມືການຕິດຕັ້ງ
1. ການຕິດຕັ້ງຫມໍ້ໄຟ
The BY-BM3031 requires two AA batteries for operation. Ensure the microphone is turned off before installing or replacing batteries.
- Locate the battery compartment on the underside of the microphone body.
- ເປີດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟ.
- ໃສ່ແບັດເຕີຣີ AA ສອງກ້ອນ, ໂດຍສັງເກດຂົ້ວທີ່ຖືກຕ້ອງ (+/-) ຕາມທີ່ລະບຸໄວ້ພາຍໃນຊ່ອງ.
- ປິດຝາປິດຊ່ອງໃສ່ຫມໍ້ໄຟຢ່າງປອດໄພ.
Image: The battery compartment of the BY-BM3031 microphone, showing the correct orientation for inserting two AA batteries.
2. Attaching to Camera/Device
The microphone features an integrated cold shoe mount with a 1/4"-20 threaded mount for versatile attachment.
- Slide the microphone's cold shoe mount into your camera's hot shoe or cold shoe adapter.
- Tighten the locking wheel on the microphone's mount to secure it in place.
- Alternatively, use the 1/4"-20 thread to mount the microphone onto a tripod, boom pole, or stand.
Image: The BY-BM3031 microphone securely mounted on a DSLR camera, ready for recording.
3. Connecting to Audio Input
The BY-BM3031 comes with an integrated 1/8" (3.5 mm) coiled cable for connecting to your recording device.
- Plug the 3.5 mm connector of the microphone's coiled cable into the microphone input jack of your DSLR, camcorder, or audio recorder.
- Ensure the connection is firm to avoid audio dropouts.
Image: The BY-BM3031 microphone with its integrated coiled 3.5mm cable, ready for connection.
4. Attaching Windscreen
Use the appropriate windscreen based on your recording environment.
- Foam Windscreen: Ideal for indoor use or light wind conditions to reduce plosives and breath noise. Slide it over the microphone capsule.
- Fur Windscreen (Windjammer): Recommended for outdoor use or windy conditions to significantly reduce wind noise. Slide it over the foam windscreen for best results.
ຄໍາແນະນໍາການດໍາເນີນງານ
1. ເປີດ / ປິດພະລັງງານ
Locate the power switch on the microphone body. Slide it to the "ON" position to power on the microphone. Slide it to "OFF" when not in use to conserve battery life.
2. Adjusting Gain Control
The BY-BM3031 features a three-position gain control switch to optimize your audio levels. Adjust this based on the loudness of your sound source and the input sensitivity of your recording device.
- +20 dB: Use this setting for quiet sound sources or when your recording device's input is low. This boosts the microphone's output.
- 0 dB: This is the standard, unity gain setting, suitable for most general recording situations.
- -10 dB: Use this pad setting for very loud sound sources to prevent audio clipping and distortion.
ຮູບພາບ: ໃກ້ຊິດ view of the gain control and high-pass filter switches on the BY-BM3031.
3. Using the High-Pass Filter
The high-pass filter (HPF) helps to eliminate unwanted low-frequency noise. It has two settings:
- ແປ: No filter applied. Use when you want to capture the full frequency range of your audio.
- 80Hz: Activates the high-pass filter at 80 Hz. This is useful for reducing rumble from air conditioners, traffic, or handling noise.
4. ການຕິດຕາມສຽງ
The 3.5 mm headphone jack on the microphone allows you to monitor your audio in real-time. This is crucial for ensuring proper levels and sound quality during recording.
- Plug your headphones into the 3.5 mm headphone jack on the rear panel of the microphone.
- Listen carefully to the audio being recorded. Adjust the gain control and high-pass filter as needed to achieve clear, undistorted sound.
Image: The BY-BM3031 in use during a studio recording session, demonstrating its application.
Image: The BY-BM3031 capturing audio during a musical performance.
Image: The BY-BM3031 used for recording at an event.
Image: The BY-BM3031 capturing audio during a presentation or lecture.
ບໍາລຸງຮັກສາ
Proper maintenance will extend the life and performance of your BY-BM3031 microphone.
- ທໍາຄວາມສະອາດ: Use a soft, dry cloth to wipe the microphone body. Do not use harsh chemicals or abrasive cleaners.
- ການເກັບຮັກສາ: When not in use, store the microphone in its carrying pouch to protect it from dust, moisture, and physical damage.
- ແບັດເຕີຣີ: Remove batteries if the microphone will not be used for an extended period to prevent leakage and damage.
- ຫຼີກເວັ້ນຄວາມຊຸ່ມ: Keep the microphone away from water and high humidity.
- ຈັດການດ້ວຍຄວາມລະມັດລະວັງ: ຫຼີກລ່ຽງການລຸດລົງ ຫຼື ວາງໄມໂຄຣໂຟນຕໍ່ກັບຜົນກະທົບທີ່ຮຸນແຮງ.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີສຽງ ຫຼື ສຽງເບົາຫຼາຍ |
|
|
| Distorted or clipped audio |
|
|
| Excessive background noise/rumble |
|
|
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຍີ່ຫໍ້ | BOYA |
| ຊື່ຕົວແບບ | by-bm3031 |
| ຕົວປະກອບແບບຟອມໄມໂຄຣໂຟນ | ປືນຍິງ |
| ຮູບແບບຂົ້ວໂລກ | ຊຸບເປີຄາດິອອຍ (ທິດທາງດຽວ) |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | ຜູ້ຊ່ວຍ |
| ປະເພດຕົວເຊື່ອມຕໍ່ | Jack ຂະ ໜາດ 3.5 ມມ |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | Camera, Camcorders, Audio Recorders |
| ແຫຼ່ງພະລັງງານ | ສາກແບັດເຕີລີ່ (ຕ້ອງໃຊ້ແບັດ AA 2 ອັນ) |
| ວັດສະດຸ | Acrylonitrile Butadiene Styrene (ABS) |
| ອັດຕາສ່ວນສັນຍານເຖິງສຽງດັງ | 80 dB |
| ລະດັບສຽງ | 10 dB |
| ຂະໜາດສິນຄ້າ (L x W x H) | 8.23 x 4.06 x 1.97 ນິ້ວ |
| ນ້ໍາຫນັກລາຍການ | 5.3 ອອນສ໌ (150 ກຣາມ) |
| ວັນທີທີ່ມີໃຫ້ທໍາອິດ | ວັນທີ 2 ທັນວາ 2018 |
| ໄລຍະເວລາການມີອາໄຫຼ່ຂອງສະຫະພາບເອີຣົບ | 2 ປີ |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
BOYA products are designed and manufactured to high-quality standards. For specific warranty information and support, please refer to the warranty card included with your product or visit the official BOYA webເວັບໄຊ.
Spare parts for this product are available for a duration of 2 years within the EU.
For technical assistance or service inquiries, please contact BOYA customer support through their official channels.
