1. ບົດແນະນຳ
This manual provides essential information for the safe and efficient operation of your Behringer NX6000D Power Amplifier. Please read it thoroughly before use and retain it for future reference. The NX6000D is a high-performance, ultra-lightweight 6000-Watt Class-D power amplifier with integrated DSP and 24-bit/96 kHz converters, designed for professional audio applications.
2. ຄໍາແນະນໍາຄວາມປອດໄພທີ່ສໍາຄັນ
- ແຫຼ່ງພະລັງງານ: Connect the unit only to an AC power outlet of the correct voltage as specified on the rear panel.
- ການລະບາຍອາກາດ: ຮັບປະກັນການລະບາຍອາກາດທີ່ພຽງພໍ. ຫ້າມປິດຊ່ອງລະບາຍອາກາດ.
- ນ້ໍາແລະຄວາມຊຸ່ມ: ຫ້າມໃຫ້ອຸປະກອນນີ້ຖືກຝົນ ຫຼື ຄວາມຊຸ່ມຊື່ນ. ຫ້າມວາງວັດຖຸທີ່ເຕັມໄປດ້ວຍຂອງແຫຼວໄວ້ເທິງອຸປະກອນ.
- ການບໍລິການ: ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບພະນັກງານບໍລິການທີ່ມີຄຸນວຸດທິ. ຢ່າພະຍາຍາມໃຫ້ບໍລິການຜະລິດຕະພັນນີ້ຕົວທ່ານເອງ.
- ສາຍໄຟ: Use only high-quality, shielded cables for all audio connections to prevent interference.
- ການຕໍ່ດິນ: ຜະລິດຕະພັນນີ້ຕ້ອງໄດ້ຮັບການຮາກຖານ.
- ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດດ້ວຍຜ້າແຫ້ງເທົ່ານັ້ນ.
3. ຄູ່ມືການຕິດຕັ້ງ
3.1 ການຫຸ້ມຫໍ່ແລະການກວດກາ
ລະມັດລະວັງ unpack ໄດ້ amplifier and inspect it for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 ການຈັດວາງ
The NX6000D is designed for rack mounting. Ensure sufficient space around the unit for proper airflow. Avoid placing it near heat sources or in direct sunlight.
3.3 ການເຊື່ອມຕໍ່
- ການເຊື່ອມຕໍ່ພະລັງງານ: ເຊື່ອມຕໍ່ສາຍໄຟ AC ທີ່ສະໜອງໃຫ້ເຂົ້າກັບ amplifier's power inlet and then to a suitable grounded power outlet.
- ການເຊື່ອມຕໍ່ຂາເຂົ້າ: Use balanced XLR or 1/4" TRS cables to connect your audio source (mixer, preamplifier) to the INPUT A and INPUT B jacks on the rear panel.
- ການເຊື່ອມຕໍ່ຜົນໄດ້ຮັບ: Connect your loudspeakers to the SPEAKON output connectors (OUTPUT A and OUTPUT B) on the rear panel. Ensure correct polarity and impedance matching. The amplifier supports 4-ohm and 8-ohm loads.
Figure 1: Front panel of the Behringer NX6000D Power Amplifier, showing controls and display.
ຮູບທີ 2: ມຸມ view of the Behringer NX6000D Power Amplifier, highlighting its compact design.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
4.1 ການເປີດ/ປິດ
Press the POWER button on the front panel to turn the unit on. The display will illuminate. To power off, press the POWER button again.
4.2 ແຜງຄວບຄຸມດ້ານໜ້າ
- Level Controls (CH A, CH B): Adjust the output level for each channel.
- SIGNAL/LIMIT/PROTECT LEDs: Indicate signal presence, limiting activity, and protection mode.
- ຈໍ LCD: Shows current settings, DSP parameters, and status.
- ປຸ່ມຕັ້ງຄ່າ: Accesses the main setup menu.
- PROCESS Button: Accesses DSP processing parameters.
- ປຸ່ມຕົວເຂົ້າລະຫັດ: Navigates menus and adjusts parameter values.
- ປຸ່ມອອກ: Returns to the previous menu or main screen.
4.3 DSP Functionality
The integrated DSP allows for advanced audio processing. Press the PROCESS button to enter the DSP menu. Here you can configure:
- ຊັກຊ້າ: Adjust signal delay for speaker alignment.
- ປະເພດ: Set crossover frequencies and filter types (e.g., Butterworth, Linkwitz-Riley, Bessel) up to 48 dB/octave.
- EQ: Utilize 8 parametric and 2 dynamic equalizer bands for precise frequency shaping.
- ການປະມວນຜົນແບບໄດນາມິກ: Apply compression or limiting to control dynamic range.
- ການຕັ້ງຄ່າຄວາມປອດໄພ: Lock settings to prevent unauthorized changes.
Use the Encoder Knob to navigate and adjust parameters. Press the Encoder Knob to confirm selections. Refer to the full digital manual (available on the Behringer website) for detailed DSP operation.
5. ບໍາລຸງຮັກສາ
- ທໍາຄວາມສະອາດ: Disconnect the power cord before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- ການລະບາຍອາກາດ: ກວດສອບເປັນປະຈຳວ່າຊ່ອງລະບາຍອາກາດບໍ່ມີຝຸ່ນ ແລະ ສິ່ງເສດເຫຼືອ.
- ການເຊື່ອມຕໍ່ສາຍ: ກວດເບິ່ງການເຊື່ອມຕໍ່ສາຍທັງໝົດເປັນໄລຍະໆເພື່ອຄວາມສອດຄ່ອງທີ່ປອດໄພ ແລະ ອາການສວມໃສ່.
- ການເກັບຮັກສາ: ຖ້າເກັບຮັກສາອຸປະກອນໄວ້ເປັນເວລາດົນ, ໃຫ້ແນ່ໃຈວ່າມັນຢູ່ໃນສະພາບແວດລ້ອມແຫ້ງ ແລະ ບໍ່ມີຝຸ່ນ.
6. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີພະລັງງານ | Power cord disconnected; faulty outlet; internal fuse. | Check power cord connection; try a different outlet; contact service if fuse is suspected. |
| ບໍ່ມີສຽງອອກ | Input/output cables incorrect; level controls too low; protection mode active. | Verify all cable connections; increase level controls; check PROTECT LED (if lit, power cycle unit). |
| ສຽງບິດເບືອນ | Input signal too high; speaker impedance mismatch; faulty speaker. | Reduce input signal level; verify speaker impedance matches amplifier; test with different speakers. |
| ຫົວໜ່ວຍຮ້ອນເກີນໄປ | ລະບາຍອາກາດອຸດຕັນ; ມີການໂຫຼດຫຼາຍເກີນໄປ. | Ensure clear airflow around the unit; reduce output level or load. |
7. ຂໍ້ກໍານົດດ້ານວິຊາການ
- ພະລັງງານອອກ: 2 x 3000 Watts into 4 Ohms, 2 x 1600 Watts into 8 Ohms
- ນ້ຳໜັກ: Less than 13.2 lbs / 6.0 kg
- ຂະໜາດ (H x W x D): ປະມານ 3.7 x 19.02 x 12.44 ນິ້ວ (94 x 483 x 316 ມມ)
- DSP: High-performance DSP with 24-bit/96 kHz converters
- DSP Features: Delay, Crossover (3 filter types, up to 48 dB/octave), EQ (8 parametric, 2 dynamic), Dynamics Processing
- ຕົວເຊື່ອມຕໍ່ເຂົ້າ: 2 x XLR/TRS combo jacks
- Output Connectors: 2 x SpeakON connectors
- ການສະຫນອງພະລັງງານ: Ultra-efficient switch-mode power supply
- ຄວາມເຢັນ: Revolutionary cool-running high-density Class-D technology
- ວັດສະດຸ: ໂລຫະ
- ສີ: ດຳ
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For detailed warranty information, please refer to the Behringer warranty program available on their official website. Behringer products are typically covered by a limited warranty against defects in materials and workmanship.
8.1 ສະຫນັບສະຫນູນດ້ານວິຊາການ
If you encounter issues not covered in the troubleshooting section or require further assistance, please visit the official Behringer support website or contact their customer service. You may need your product's serial number for support inquiries.
Behringer ຢ່າງເປັນທາງການ Webເວັບໄຊ: www.behringer.com
