1. ບົດແນະນຳ
Thank you for choosing the lightmaXX Vega 3-Way PRO Beam/WASH/FX Moving Head Scanner. This versatile lighting fixture is designed for professional stage, event, and club applications, offering dynamic beam, wash, and special effect capabilities. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. ຄໍາແນະນໍາຄວາມປອດໄພ
Please read and understand all safety instructions before installing or operating this device. Failure to comply with these instructions may result in electric shock, fire, or personal injury.
- ອຸປະກອນນີ້ແມ່ນສໍາລັບການນໍາໃຊ້ມືອາຊີບເທົ່ານັ້ນ.
- ຮັບປະກັນການສະຫນອງພະລັງງານ voltage ກົງກັບ voltage ໄດ້ລະບຸໄວ້ໃນຫນ່ວຍງານ.
- ເຊື່ອມຕໍ່ອຸປະກອນກັບປລັກສຽບໄຟທີ່ມີຮາກຖານຢູ່ສະເໝີ.
- Disconnect from mains power before any service, cleaning, or maintenance.
- ຢ່າເຮັດວຽກອຸປະກອນຖ້າສາຍໄຟເສຍຫາຍ.
- ຫຼີກເວັ້ນການສໍາຜັດກັບຕາໂດຍກົງກັບແຫຼ່ງແສງສະຫວ່າງ.
- Ensure adequate ventilation around the unit to prevent overheating. Maintain a minimum distance of 0.5 meters from flammable materials.
- Mount the device securely using appropriate clamps ແລະສາຍຄວາມປອດໄພ.
- ຫ້າມເປີດທີ່ຢູ່ອາໄສ; ບໍ່ມີສ່ວນທີ່ຜູ້ໃຊ້ບໍລິການພາຍໃນ. ອ້າງອີງການບໍລິການທັງໝົດໃຫ້ກັບບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
- Keep the device away from rain, moisture, and extreme temperatures.
3. ຜະລິດຕະພັນເກີນview
The lightmaXX Vega 3-Way PRO is a hybrid moving head fixture designed to deliver powerful and versatile lighting effects. It combines beam, wash, and special effect functionalities in one compact unit.
ຮູບ 3.1: ດ້ານຫນ້າ view of the lightmaXX Vega 3-Way PRO, displaying red light output.
ຮູບ 3.2: ດ້ານຫນ້າ view of the lightmaXX Vega 3-Way PRO with lights off, showing the lens array.
3.1 ແຜງຄວບຄຸມ ແລະ ການເຊື່ອມຕໍ່
The rear of the unit features the control panel and various input/output connections for power and DMX control.
Figure 3.3: Close-up of the control panel and connection ports.
ຮູບ 3.4: ດ້ານຫລັງ view of the lightmaXX Vega 3-Way PRO, showing DMX In/Out, Power In/Out, and fuse.
- DMX ເຂົ້າ/ອອກ: ຕົວເຊື່ອມຕໍ່ XLR 3-pin ສຳລັບການປ້ອນຂໍ້ມູນ ແລະ ຜົນຜະລິດສັນຍານ DMX.
- ພະລັງງານເຂົ້າ/ອອກ: PowerCon compatible connectors for mains power input and daisy-chaining power to other units.
- FUSE: Fuse holder for circuit protection.
- ປຸ່ມເປີດ/ປິດ: ສະຫຼັບພະລັງງານຕົ້ນຕໍສໍາລັບຫນ່ວຍບໍລິການ.
- ຈໍສະແດງຜົນ: LCD screen for menu navigation and settings.
- ປຸ່ມຄວບຄຸມ: UP, DOWN, ESC, ENTER for navigating the menu and adjusting settings.
- DMX/Run Indicators: LEDs indicating DMX signal presence and auto-run mode.
4. ຕັ້ງຄ່າ
4.1 ການຕິດຕັ້ງ
The lightmaXX Vega 3-Way PRO can be mounted in various orientations (floor, truss, wall) using appropriate mounting hardware (not included). Always ensure the mounting surface or truss is capable of supporting the weight of the fixture and any additional equipment.
- Use a safety cable (not included) attached to the designated safety point on the fixture to prevent accidental drops.
- Ensure the fixture is securely fastened and balanced.
- Allow sufficient space around the fixture for ventilation and movement.
4.2 ການເຊື່ອມຕໍ່ພະລັງງານ
Connect the provided power cable to the POWER IN connector on the fixture and then to a suitable grounded power outlet. The unit supports daisy-chaining power to other fixtures using the POWER OUT connector, but ensure the total current draw does not exceed the circuit breaker's rating.
4.3 ການເຊື່ອມຕໍ່ DMX
To control the fixture via DMX, connect a DMX controller to the DMX IN port using a 3-pin XLR cable. If connecting multiple DMX fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next. The last fixture in the chain should have a DMX terminator connected to its DMX OUT port to prevent signal reflection.
5. ການເຮັດວຽກ
5.1 ແຜງຄວບຄຸມການນໍາທາງ
Use the control buttons to navigate the menu and adjust settings:
- ຂຶ້ນລົງ: Scroll through menu options or increase/decrease values.
- ຕື່ມ: ເລືອກຕົວເລືອກ ຫຼືຢືນຢັນການຕັ້ງຄ່າ.
- ESC: Go back to the previous menu or cancel an action.
5.2 ການຕັ້ງຄ່າທີ່ຢູ່ DMX
To control the fixture with a DMX controller, you must set a unique DMX start address for each unit. Refer to the DMX channel chart in your DMX controller's manual for channel assignments.
- ກົດ ປ້ອນ ເພື່ອເຂົ້າເຖິງເມນູຫຼັກ.
- Navigate to the 'DMX Address' or 'Address Set' option using ຂຶ້ນ/ລົງ.
- ກົດ ປ້ອນ ເພື່ອເລືອກ.
- ໃຊ້ ຂຶ້ນ/ລົງ to set the desired DMX start address.
- ກົດ ປ້ອນ to confirm and save the address.
5.3 ຮູບແບບການໃຊ້ງານ
The lightmaXX Vega 3-Way PRO typically offers several operating modes:
- ໂໝດ DMX: Full control over all functions via a DMX controller.
- ໂໝດແລ່ນອັດຕະໂນມັດ: Pre-programmed internal light shows that run automatically. Select 'Auto Run' from the menu and choose a program.
- ໂໝດນຳໃຊ້ສຽງ: The fixture reacts to sound via its built-in microphone. Select 'Sound Active' from the menu.
- ຮູບແບບແມ່ບົດ/ສໍາລອງ: Link multiple units together. Set one unit as 'Master' and others as 'Slave'. The slave units will mirror the master's actions.
6. ບໍາລຸງຮັກສາ
Regular maintenance ensures the longevity and optimal performance of your lightmaXX Vega 3-Way PRO.
- ທໍາຄວາມສະອາດ: Periodically clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and cool before cleaning.
- ການລະບາຍອາກາດ: Keep ventilation openings clear of dust and debris. Use compressed air to gently clear vents if necessary.
- ການທົດແທນຟິວ: If the unit does not power on, check the fuse. Disconnect power, unscrew the fuse holder, and replace with a fuse of the exact same type and rating (refer to specifications).
- ການກວດກາ: ກວດກາສາຍໄຟ, ສາຍ DMX, ແລະ ຮາດແວຕິດຕັ້ງເປັນປະຈຳເພື່ອຊອກຫາຮ່ອງຮອຍຂອງການສວມໃສ່ ຫຼື ຄວາມເສຍຫາຍ. ປ່ຽນສ່ວນປະກອບທີ່ເສຍຫາຍທັນທີ.
7. ການແກ້ໄຂບັນຫາ
If you encounter issues with your lightmaXX Vega 3-Way PRO, refer to the following common problems and solutions:
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີພະລັງງານ | No mains power; Blown fuse; Damaged power cable | Check power outlet; Replace fuse; Replace power cable |
| ບໍ່ມີການຄວບຄຸມ DMX | Incorrect DMX address; Faulty DMX cable; No DMX signal; Missing terminator | Verify DMX address; Check/replace DMX cables; Ensure DMX controller is active; Add DMX terminator to last fixture |
| Fixture not moving/responding | DMX issue; Internal error; Motor blockage | Check DMX connection/address; Power cycle the unit; Ensure no physical obstructions |
| ຮ້ອນເກີນໄປ | Blocked ventilation; Insufficient airflow | Clear vents; Ensure proper spacing for airflow |
If the problem persists after attempting these solutions, please contact lightmaXX customer support or your authorized dealer.
8. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ຕົວແບບ | Vega 3-Way PRO Beam/WASH/FX |
| ຜູ້ຜະລິດອ້າງອີງ | LIG0014819-000 |
| ການບໍລິໂພກພະລັງງານ | 240 ວັດ |
| ຂະໜາດ (L x W x H) | 43.5 x 36.5 x 33 cm |
| ນ້ຳໜັກ | 11.1 ກິໂລກຣາມ |
| ການເຊື່ອມຕໍ່ | DMX (3-pin XLR), PowerCon compatible (In/Out), USB (for service/firmware) |
| ເທັກໂນໂລຍີເຊັນເຊີ Optical | CMOS |
| ຄວາມລະອຽດ | 600 (units not specified, likely for internal sensor) |
9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your authorized lightmaXX dealer. If you require technical assistance or have questions not covered in this manual, please contact lightmaXX customer support or your retailer for further guidance.
