ແນະນຳ
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your PEDROLLO JSWm/2CX self-priming water pump. Please read these instructions carefully before installation or use and retain them for future reference.
ຮູບທີ 1: PEDROLLO JSWm/2CX Self-Priming Water Pump. This image shows the blue-colored pump unit with its motor housing and pump body, designed for efficient water transfer.
ຂໍ້ມູນຄວາມປອດໄພ
ໃຫ້ປະຕິບັດຕາມຂໍ້ຄວນລະວັງດ້ານຄວາມປອດໄພຕໍ່ໄປນີ້ສະເໝີເພື່ອປ້ອງກັນການບາດເຈັບ ຫຼື ຄວາມເສຍຫາຍຕໍ່ປໍ້າ:
- Ensure the pump is installed by a qualified professional.
- ຕັດການເຊື່ອມຕໍ່ໄຟຟ້າກ່ອນທີ່ຈະດໍາເນີນການບໍາລຸງຮັກສາຫຼືການບໍລິການໃດໆ.
- ຢ່າໃຊ້ປ້ຳຮ່ວມກັບຂອງແຫຼວໄວໄຟ ຫຼື ເປັນສານກັດກ່ອນ.
- ປົກປ້ອງປັ໊ມຈາກອຸນຫະພູມເຢັນ.
- ຮັບປະກັນການຕໍ່ສາຍດິນທີ່ເໝາະສົມຂອງການເຊື່ອມຕໍ່ໄຟຟ້າ.
ສິນຄ້າເກີນview
The PEDROLLO JSWm/2CX is a self-priming centrifugal pump designed for reliable water transfer. It is suitable for pumping clean water and liquids that are not chemically aggressive to the pump's components. Its self-priming capability allows it to draw water even when air is present in the suction line, making it ideal for domestic water supply, small to medium autoclave tank systems, and garden irrigation.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- Self-priming design for efficient operation.
- Suitable for clean water and non-aggressive liquids.
- Robust construction with stainless steel components.
- Designed for continuous duty in domestic and garden applications.
ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
Proper installation is crucial for the pump's performance and longevity. Consult a qualified technician for installation.
- ສະຖານທີ່: Install the pump in a dry, well-ventilated area, protected from direct sunlight and freezing temperatures. Ensure adequate space for maintenance.
- ການຕິດຕັ້ງ: Securely fasten the pump to a stable, level surface using appropriate bolts to minimize vibration.
- ທໍ່:
- Use pipes of adequate diameter to minimize friction losses.
- Ensure all connections are airtight, especially on the suction side, to prevent air ingress.
- ຕິດຕັ້ງວາວຕີນທີ່ມີຕົວກອງຢູ່ປາຍທໍ່ດູດເພື່ອປ້ອງກັນບໍ່ໃຫ້ສິ່ງເສດເຫຼືອເຂົ້າໄປໃນປັ໊ມ ແລະ ເພື່ອຮັກສາລະດັບຄວາມສູງ.
- Install a gate valve on both the suction and discharge sides for isolation during maintenance.
- ການເຊື່ອມຕໍ່ໄຟຟ້າ:
- Connect the pump to a suitable power supply (220-230V, 50Hz) as indicated on the motor's data plate.
- Ensure the electrical circuit is protected by a residual current device (RCD) and an appropriately rated circuit breaker.
- Verify proper grounding according to local electrical codes.
- ການແຕ່ງຕົວ: Before initial startup, completely fill the pump casing and the suction line with clean water through the priming port. This is essential for self-priming pumps to initiate operation.
ຄໍາແນະນໍາການດໍາເນີນງານ
- ການເລີ່ມຕົ້ນ: After installation and priming, open the discharge valve fully. Switch on the power supply. The pump should start and begin to draw water.
- ການດໍາເນີນງານຢ່າງຕໍ່ເນື່ອງ: Monitor the pump for unusual noises or vibrations. Ensure the pump is not running dry, as this can cause severe damage.
- ປິດເຄື່ອງ: To stop the pump, switch off the power supply. If the pump is part of an automatic system (e.g., with a pressure switch), it will start and stop automatically based on demand.
- ຂີດຈຳກັດອຸນຫະພູມ:
- Liquid temperature: up to +40 °C.
- Ambient temperature: -10 °C to +40 °C.
ບໍາລຸງຮັກສາ
Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect power before maintenance.
- ກວດກາປົກກະຕິ: Inspect the pump and piping for leaks, corrosion, or damage.
- ທໍາຄວາມສະອາດ Strainer: Periodically clean the foot valve strainer to prevent blockages and maintain flow.
- ລະດູໜາວ: In areas prone to freezing, drain the pump completely and store it in a warm, dry place, or insulate it adequately to prevent damage from ice expansion.
- ການກວດກາມໍເຕີ: Ensure the motor's cooling fins are free from dust and debris to prevent overheating.
ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ປັ໊ມບໍ່ເລີ່ມຕົ້ນ | No power supply; Motor overload; Seized impeller. | Check power connection and circuit breaker; Reset thermal overload; Contact service technician. |
| ປ້ຳເຮັດວຽກແຕ່ບໍ່ມີນ້ຳມາສົ່ງ | Pump not primed; Air leak in suction line; Foot valve clogged; Suction lift too high. | Re-prime the pump; Check all suction connections for leaks; Clean foot valve strainer; Reduce suction lift if possible. |
| ອັດຕາການໄຫຼ ຫຼື ຄວາມດັນຫຼຸດລົງ | Partial blockage in piping; Worn impeller; Air in system. | Inspect and clear piping; Contact service technician for impeller replacement; Bleed air from system. |
| ສິ່ງລົບກວນຫຼືການສັ່ນສະເທືອນຫຼາຍເກີນໄປ | Cavitation (air in water); Loose mounting; Bearing wear. | Check for air leaks and ensure proper priming; Tighten mounting bolts; Contact service technician. |
ຂໍ້ມູນຈໍາເພາະ
| ພາລາມິເຕີ | ມູນຄ່າ |
|---|---|
| ຕົວແບບ | JSWm/2CX |
| ຍີ່ຫໍ້ | ເປໂດຣໂລ |
| ພະລັງງານ (HP) | 1 HP |
| ສະບັບtage / ຄວາມຖີ່ | 220-230V / 50Hz |
| ອັດຕາການໄຫຼສູງສຸດ | 70 ລິດຕໍ່ນາທີ |
| ຊ່ວງອຸນຫະພູມຂອງແຫຼວ | ສູງສຸດ +40 °C |
| ຊ່ວງອຸນຫະພູມສະພາບແວດລ້ອມ | -10 °C ຫາ +40 °C |
| ວັດສະດຸ | Stainless Steel (pump body components) |
| ASIN | B07HMZ2DKQ |
| ລະຫັດມາດຕາສາກົນ | 08052230012515 |
Note: The specification for "Power: 220 Watts" found in some product listings may refer to a specific component or a different metric. The pump's performance is rated at 1 HP.
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
For warranty information, technical support, or spare parts, please contact your authorized Pedrollo dealer or visit the official Pedrollo webເວັບໄຊ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.
ຜູ້ຜະລິດ: ເປໂດຣໂລ
