ແນະນຳ
This manual provides essential instructions for the Lexmark E460DN laser printer. Designed for small and midsize workgroups, the E460DN offers efficient, high-quality monochrome printing with advanced features. This document covers unpacking, setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.
The Lexmark E460DN is a Certified Refurbished product, meaning it has been tested and certified to function like new. It includes a toner drum and comes with a 90-day warranty.
ສິນຄ້າເກີນview
The Lexmark E460DN is a compact laser printer featuring a light gray and dark gray exterior. It is equipped with a user-friendly control panel and supports various paper handling options.
ຮູບທີ 1: ດ້ານໜ້າ view of the Lexmark E460DN Laser Printer. The image displays the printer's light gray body with a dark gray top section, including the output tray and control panel. The Lexmark logo is visible on the front panel.
ຄຸນນະສົມບັດທີ່ສໍາຄັນ:
- ຄວາມໄວພິມໄວ: ສູງສຸດ 40 ໜ້າຕໍ່ນາທີ (ppm) ສຳລັບເອກະສານສີດຳ.
- ຄຸນນະພາບການພິມສູງ: True 1200 x 1200 dpi resolution for sharp text and graphics.
- Automatic Duplexing: Standard feature for two-sided printing, reducing paper consumption.
- Network Ready: Ethernet connectivity for shared use in workgroup environments.
- ການໂຕ້ຕອບຜູ້ເປັນມິດ: Four-line operator panel for easy navigation and control.
- ຄວາມປອດໄພທີ່ປັບປຸງ: Numeric pad for confidential printing.
- ການດໍາເນີນງານປະສິດທິພາບ: Instant warm-up fuser for fast first-page-out times and reduced power consumption.
ຄໍາແນະນໍາການຕິດຕັ້ງ
- ຖອດເຄື່ອງພິມອອກ: Carefully remove the printer from its packaging. Remove all packing materials, tapes, and protective films.
- ວາງເຄື່ອງພິມ: Position the printer on a stable, level surface with adequate ventilation. Ensure sufficient space around the printer for paper loading and output.
- ເຊື່ອມຕໍ່ພະລັງງານ: Plug the power cord into the printer's power inlet, then into a grounded electrical outlet.
- Install Toner/Drum (if applicable): If the toner cartridge and imaging drum are not pre-installed, follow the instructions provided with the consumables to install them. For refurbished units, these components are typically pre-installed.
- ເອກະສານການໂຫຼດ: Open the paper tray and adjust the paper guides to fit the paper size. Load the desired print media (e.g., plain paper, envelopes) into the tray.
- ເຊື່ອມຕໍ່ກັບເຄືອຂ່າຍ / ຄອມພິວເຕີ:
- Ethernet (Wired): ເຊື່ອມຕໍ່ສາຍອີເທີເນັດຈາກພອດອີເທີເນັດຂອງເຄື່ອງພິມໄປຫາເຣົາເຕີເຄືອຂ່າຍ ຫຼືສະວິດຂອງທ່ານ.
- USB (Optional, if available): ເຊື່ອມຕໍ່ສາຍ USB ຈາກເຄື່ອງພິມຫາຄອມພິວເຕີຂອງທ່ານ.
- ຕິດຕັ້ງໄດເວີ: Turn on the printer. Install the appropriate printer drivers on your computer. Drivers can usually be found on the manufacturer's webເວັບໄຊ.
- Perform a Test Print: After driver installation, print a test page to confirm proper setup and connectivity.
ຄໍາແນະນໍາການດໍາເນີນງານ
ການນຳທາງແຜງຄວບຄຸມ:
The Lexmark E460DN features a four-line display and several buttons for navigating menus and controlling printer functions. Use the arrow buttons to scroll through options and the 'Menu' or 'Select' button to confirm selections. The 'Back' button allows you to return to previous menus, and the 'Stop' button can cancel print jobs.
ການພິມພື້ນຖານ:
- ກວດໃຫ້ແນ່ໃຈວ່າເຄື່ອງພິມເປີດຢູ່ ແລະເຊື່ອມຕໍ່ກັບຄອມພິວເຕີ ຫຼືເຄືອຂ່າຍຂອງທ່ານ.
- ເປີດເອກະສານທີ່ທ່ານຕ້ອງການພິມໃນຄອມພິວເຕີຂອງທ່ານ.
- ເລືອກ File > ພິມ (ຫຼືຄໍາສັ່ງທຽບເທົ່າໃນຄໍາຮ້ອງສະຫມັກຂອງທ່ານ).
- Choose the Lexmark E460DN from the list of available printers.
- ປັບການຕັ້ງຄ່າການພິມຕາມຄວາມຕ້ອງການ (ເຊັ່ນ: ຈໍານວນຂອງສໍາເນົາ, ຂະຫນາດເຈ້ຍ, ຄຸນນະພາບການພິມ).
- For two-sided printing, select the duplex option in your printer settings. The E460DN supports automatic duplexing.
- ກົດ ພິມ.
ການພິມເປັນຄວາມລັບ:
The printer supports confidential printing using a numeric pad. When sending a confidential print job from your computer, you will be prompted to enter a PIN. To release the job at the printer, enter the same PIN using the control panel's numeric pad.
ບໍາລຸງຮັກສາ
Toner Cartridge and Imaging Drum Replacement:
The Lexmark E460DN uses a combined toner cartridge and imaging drum unit. The printer's control panel will display early-warning alerts for low toner. When prompted:
- ເປີດປະຕູທາງເຂົ້າຂອງເຄື່ອງພິມ.
- Carefully remove the old toner/drum unit by pulling it straight out.
- Unpack the new toner/drum unit and gently shake it to distribute the toner.
- Insert the new unit into the printer until it clicks into place.
- ປິດປະຕູທາງເຂົ້າ.
Dispose of used toner cartridges according to local regulations or return them to Lexmark for recycling.
ທໍາຄວາມສະອາດເຄື່ອງພິມ:
- ພາຍນອກ: ເຊັດພື້ນຜິວພາຍນອກດ້ວຍຜ້າອ່ອນໆ, ງamp, ຜ້າບໍ່ມີ lint. ຢ່າໃຊ້ເຄື່ອງເຮັດຄວາມສະອາດຂັດຫຼືສານລະລາຍ.
- ພາຍໃນ: Periodically clean the paper path and other accessible interior areas to remove dust and paper debris. Refer to the printer's on-screen messages or full service manual for detailed internal cleaning procedures.
ການແກ້ໄຂບັນຫາ
This section provides solutions to common issues you may encounter with your Lexmark E460DN printer. For more complex problems, consult the full service manual or Lexmark support.
ບັນຫາທົ່ວໄປ ແລະການແກ້ໄຂ:
- ເຄື່ອງພິມບໍ່ຕອບສະໜອງ:
- ກວດເບິ່ງການເຊື່ອມຕໍ່ໄຟຟ້າ ແລະໃຫ້ແນ່ໃຈວ່າເຄື່ອງພິມເປີດຢູ່.
- ຢືນຢັນການເຊື່ອມຕໍ່ເຄືອຂ່າຍ ຫຼືສາຍ USB.
- ຣີສະຕາດເຄື່ອງພິມ ແລະຄອມພິວເຕີຂອງທ່ານ.
- ໃຫ້ແນ່ໃຈວ່າໄດເວີເຄື່ອງພິມຖືກຕິດຕັ້ງແລະປັບປຸງຢ່າງຖືກຕ້ອງ.
- ເຈ້ຍຕິດ:
- Follow the instructions on the printer's display or in the full service manual to locate and clear jammed paper.
- ໃຫ້ແນ່ໃຈວ່າກະດາດຖືກໂຫລດຢ່າງຖືກຕ້ອງແລະບໍ່ເຕັມໃສ່ຖາດ.
- ໃຊ້ປະເພດເຈ້ຍທີ່ແນະນໍາ.
- ຄຸນນະພາບການພິມບໍ່ດີ:
- Check toner levels. Replace the toner/drum unit if low or empty.
- Ensure the imaging drum is clean and free from damage.
- Perform a print quality test from the printer's menu to diagnose issues.
- Clean the printer's interior as described in the maintenance section.
- ຂໍ້ຄວາມຜິດພາດ:
Refer to the customizable operator panel messaging for specific error codes or descriptions. Consult the full service manual for detailed explanations and solutions for each error message.
ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ຂໍ້ມູນຈໍາເພາະ |
|---|---|
| ໝາຍເລກຕົວແບບ | E460DN |
| ເຕັກໂນໂລຊີການພິມ | ເລເຊີ |
| ຜົນຜະລິດເຄື່ອງພິມ | ໂມໂນໂຄມ |
| ຄວາມໄວການພິມສູງສຸດ (ໂມໂນໂຄມ) | Up to 40 ppm (letter-size paper) |
| ຄວາມລະອຽດການພິມ | 1200 x 1200 dpi |
| ການພິມສອງຊັ້ນ | Automatic (Dual-sided printing) |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | Wired; Ethernet |
| ການໂຕ້ຕອບຮາດແວ | ອີເທີເນັດ |
| ຄວາມອາດສາມາດເກັບຮັກສາຫນ່ວຍຄວາມຈໍາ | 64 MB |
| ຄວາມອາດສາມາດຂອງແຜ່ນປ້ອນຂໍ້ມູນສູງສຸດ | 300 ແຜ່ນ |
| ຄວາມອາດສາມາດຂອງແຜ່ນຜົນຜະລິດ | 150 ແຜ່ນ |
| ຮອງຮັບສື່ສິ່ງພິມ | Envelopes, Plain Paper |
| ຂະໜາດສິນຄ້າ | 14.55 x 15.98 x 10.2 ນິ້ວ |
| ສີ | ສີຂີ້ເຖົ່າອ່ອນ/ສີຂີ້ເຖົ່າເຂັ້ມ |
| UPC | 748926547406 |
ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
This Lexmark E460DN printer is a Certified Refurbished product and comes with a ການຮັບປະກັນຈໍາກັດ 90 ວັນ. ການຮັບປະກັນນີ້ກວມເອົາຂໍ້ບົກພ່ອງຂອງວັດສະດຸແລະການເຮັດວຽກພາຍໃຕ້ການນໍາໃຊ້ປົກກະຕິ.
For warranty claims, technical support, or further assistance, please refer to the documentation provided with your refurbished product or contact the seller directly. Additional support resources may be available on the official Lexmark webເວັບໄຊ.
