1. ບົດແນະນຳ
This manual provides essential information for the safe and effective operation of your Tektronix Digital Storage Oscilloscope, Model B07GCZSDRJ. This device is designed for precise measurement and analysis of electronic signals. Please read this manual thoroughly before using the instrument to ensure proper functionality and to prevent damage or injury.
2. ຂໍ້ມູນຄວາມປອດໄພ
Always observe the following safety precautions to prevent injury and avoid damage to this product or any products connected to it.
- ໃຊ້ຜະລິດຕະພັນເທົ່ານັ້ນຕາມທີ່ລະບຸ.
- ຢ່າໃຊ້ຜະລິດຕະພັນຖ້າມັນເສຍຫາຍ.
- Perform initial safety checks before connecting to power.
- ອ້າງເຖິງການບໍລິການບຸກຄະລາກອນທີ່ມີຄຸນວຸດທິ.
- ຮັບປະກັນການລະບາຍອາກາດທີ່ເຫມາະສົມເພື່ອປ້ອງກັນຄວາມຮ້ອນເກີນ.
- ຫ້າມດໍາເນີນການໃນປຽກຫຼື damp ເງື່ອນໄຂ.
3. ຕັ້ງຄ່າ
Follow these steps to set up your oscilloscope for the first time:
- ແກະອຸປະກອນອອກ: Carefully remove the oscilloscope and all accessories from the packaging. Inspect for any visible damage.
- ເຊື່ອມຕໍ່ພະລັງງານ: Connect the provided power cord to the AC input on the rear panel of the oscilloscope, then plug it into a grounded electrical outlet.
- ເປີດ: Press the power button, usually located on the front panel. The display should illuminate.
- Probe Compensation: If using probes, connect a probe to Channel 1 and the probe compensation output. Adjust the probe compensation until a flat-top square wave is displayed.
This image serves as a placeholder and indicates that a specific product image is not available for display. It typically shows text like 'No image available' with a generic Amazon smile logo.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
This section covers basic operation of the oscilloscope.
- Vertical Controls: Use the VOLTS/DIV knob to adjust the vertical scale (voltage per division) and the position knob to move the waveform vertically.
- Horizontal Controls: Use the SEC/DIV knob to adjust the horizontal scale (time per division) and the position knob to move the waveform horizontally.
- ລະບົບກະຕຸ້ນ: The trigger controls stabilize repetitive waveforms. Adjust the trigger level and mode (e.g., Edge, Pulse) to capture the desired part of the signal.
- ຟັງຊັນການວັດແທກ: Access built-in measurement functions (e.g., Vpp, RMS, Frequency) via the 'Measure' or 'Menu' buttons.
5. ບໍາລຸງຮັກສາ
ການບຳລຸງຮັກສາທີ່ເໝາະສົມຮັບປະກັນອາຍຸການໃຊ້ງານ ແລະ ຄວາມແມ່ນຍຳຂອງອອດຊິວໂລສະໂຄບຂອງທ່ານ.
- ທໍາຄວາມສະອາດ: ເຮັດຄວາມສະອາດດ້ານນອກຂອງອຸປະກອນດ້ວຍຄວາມອ່ອນໂຍນ, ງamp cloth. Do not use abrasive cleaners or solvents. Ensure the instrument is powered off and unplugged before cleaning.
- ການປັບທຽບ: Regular calibration by qualified service personnel is recommended to maintain measurement accuracy. Refer to the service manual for calibration procedures.
- ການເກັບຮັກສາ: When not in use, store the oscilloscope in a clean, dry environment, away from direct sunlight and extreme temperatures.
6. ການແກ້ໄຂບັນຫາ
ພາກນີ້ສະຫນອງການແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີການສະແດງຜົນຫຼັງຈາກເປີດໄຟ | Power cord not connected; Power outlet fault; Internal fuse blown | Check power cord connection; Test power outlet; Contact service for fuse replacement |
| ບໍ່ມີຮູບແບບຄື້ນທີ່ສະແດງ | Input signal too small; Probe not connected; Trigger settings incorrect | Increase VOLTS/DIV; Check probe connection; Adjust trigger level and mode |
| Waveform unstable or rolling | Trigger level incorrect; Trigger source not selected; Input signal noisy | Adjust trigger level; Select correct trigger source; Use averaging mode for noisy signals |
7. ຂໍ້ມູນຈໍາເພາະ
Key technical specifications for the Tektronix Digital Storage Oscilloscope, Model B07GCZSDRJ.
| ຂໍ້ມູນຈໍາເພາະ | ມູນຄ່າ |
|---|---|
| ASIN | B07GCZSDRJ |
| ຜູ້ຜະລິດ | Tektronix |
| ວັນທີທໍາອິດທີ່ມີ | ວັນທີ 11 ສິງຫາ 2018 |
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Tektronix products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official Tektronix webເວັບໄຊ.
For technical support, service, or to inquire about replacement parts, please contact Tektronix customer service. You can find contact information on the official Tektronix webເວັບໄຊທ໌ຫຼືຜ່ານຕົວແທນຈໍາຫນ່າຍທ້ອງຖິ່ນຂອງທ່ານ.
ໝາຍເຫດ: ການສ້ອມແປງ ຫຼື ການດັດແປງທີ່ບໍ່ໄດ້ຮັບອະນຸຍາດອາດເຮັດໃຫ້ການຮັບປະກັນຂອງທ່ານເປັນໂມຄະ.
