1. ບົດແນະນຳ
This manual provides instructions for the Sena Universal Helmet Clamp Kit, model SC-A0316, designed for use with Harley-Davidson CB/Audio systems. This kit is compatible with Sena 20S, 20S EVO, and 30K communication systems, enabling wired audio and CB functionality within your helmet.
ຮູບພາບ 1.1: ຫຼາຍກວ່າview of the Sena Universal Helmet Clamp Kit, showing the main clamp unit, speakers, microphones, and various cables and mounting accessories.
2. ເນື້ອໃນຊຸດ
ກວດສອບວ່າລາຍການທັງຫມົດແມ່ນມີຢູ່ໃນຊຸດຂອງທ່ານ:
- Harley CB Audio Clamp
- Clamp Cover Adapter
- ໄມໂຄຣໂຟນຂະຫຍາຍຕົວຢ່າງ
- ໄມໂຄຣໂຟນບູມແບບມີສາຍ
- ລຳໂພງແບບໄດນາມິກ
- Hook and Loop Fastener for Boom Microphone
- ໄມໂຄຣໂຟນ Sponge
- ການປົກຫຸ້ມຂອງລໍາໂພງ Foam
- Hook ແລະ Loop Fasteners ສໍາລັບລໍາໂພງ
- Glued Surface Mounting Adapter
- Allen Wrench
- Speaker Port Cap
- ແຜ່ນລຳໂພງ
- ແຜ່ນຢາງ
- ຜູ້ຖືໄມໂຄຣໂຟນ Boom
- Hook and Loop Fastener for Holder
- Installing Foam Speaker Cover Sheet
- 7-DIN Harley Cable
3. ການຕິດຕັ້ງແລະການຕິດຕັ້ງ
This section details the installation of the clamp kit components into your helmet.
3.1. ຕິດ Clamp ໜ່ວຍ
cl ໄດ້amp unit secures the main module to your helmet. Choose between the clamp type or the glued surface mounting adapter based on your helmet's design and preference.
- Clamp ການຕິດຕັ້ງ: ພວນ screws ສຸດ clamp unit using the provided Allen wrench. Slide the clamp between the helmet shell and the inner padding, ensuring a secure fit. Tighten the screws.
- Glued Surface Mounting: Clean the desired mounting area on the helmet surface thoroughly. Peel the backing from the glued surface mounting adapter and firmly press it onto the helmet. Allow sufficient time for the adhesive to cure before attaching the main unit.
Image 3.1: The main clamp unit, which attaches to the side of the helmet.
3.2. ການຕິດຕັ້ງລໍາໂພງ
Position the speakers inside your helmet's ear pockets for optimal audio clarity.
- ກໍານົດລໍາໂພງຊ້າຍແລະຂວາ.
- Attach the hook and loop fasteners for speakers to the back of each speaker.
- Place the speakers inside the helmet's ear pockets. Ensure they are positioned directly over your ears for the best sound experience. Use speaker pads or rubber pads if needed for proper fit and comfort.
- Route the speaker wires neatly under the helmet padding to the clamp ໜ່ວຍ.
Image 3.2: The dynamic speakers with their wiring, designed to fit inside helmet ear pockets.
3.3. ການຕິດຕັ້ງໄມໂຄຣໂຟນ
Choose between the boom microphone for open-face helmets or the wired boom microphone for full-face helmets.
- Boom Microphone: Attach the boom microphone holder to the inside of the helmet near your mouth using the hook and loop fastener. Insert the boom microphone into the holder. Apply a microphone sponge for wind noise reduction.
- Wired Boom Microphone: For full-face helmets, route the wired boom microphone along the helmet's chin bar. Secure it with hook and loop fasteners so the microphone is positioned directly in front of your mouth. Apply a microphone sponge.
- Connect the chosen microphone to the appropriate port on the clamp ໜ່ວຍ.
Image 3.3: The wired boom microphone, suitable for full-face helmets.
3.4. Connecting to Harley-Davidson CB/Audio
Use the provided 7-DIN Harley cable to connect the clamp unit to your motorcycle's CB/Audio system.
- Locate the 7-DIN port on your Harley-Davidson motorcycle.
- Connect one end of the 7-DIN Harley cable to the clamp ໜ່ວຍ.
- Connect the other end of the cable to the motorcycle's 7-DIN port.
4. ຄໍາແນະນໍາການດໍາເນີນງານ
cl ນີ້amp kit facilitates the use of your Sena communication system (20S, 20S EVO, 30K) with your Harley-Davidson's integrated CB and audio system. The operation of the connected Sena unit itself is covered in its respective user manual.
4.1. ໜ້າທີ່ສຽງ
Once connected, audio from your Harley-Davidson's system (e.g., radio, intercom, navigation) will be routed through the helmet speakers. Adjust volume via your motorcycle's controls or the connected Sena unit.
4.2. CB Functionality
The microphone in your helmet will transmit through the motorcycle's CB system. Use your motorcycle's CB controls to manage transmission and reception.
4.3. Intercom (Motorcycle System)
If your Harley-Davidson has an integrated intercom system, this kit allows you to use your helmet's microphone and speakers for communication with a passenger or other connected riders through the motorcycle's system.
5. ການບໍາລຸງຮັກສາແລະການດູແລ
- ທໍາຄວາມສະອາດ: ເຊັດ clamp unit and cables with a soft, damp ຜ້າ. ຢ່າໃຊ້ສານເຄມີທີ່ຮຸນແຮງຫຼືສານລະລາຍ.
- Microphone Sponges: Replace microphone sponges periodically to maintain optimal sound quality and hygiene.
- ການກວດສອບສາຍ: Regularly inspect all cables for signs of wear, fraying, or damage. Replace damaged cables immediately.
- ການເກັບຮັກສາ: Store the kit in a dry, cool place when not in use.
6. ການແກ້ໄຂບັນຫາ
| ບັນຫາ | ສາເຫດທີ່ເປັນໄປໄດ້ | ການແກ້ໄຂ |
|---|---|---|
| ບໍ່ມີສຽງຈາກລຳໂພງ. | Loose connections, incorrect volume settings, damaged speakers/cables. | Check all cable connections. Ensure volume on both the Sena unit and motorcycle is up. Test with another Sena unit or cable if possible. Inspect speakers for damage. |
| Microphone not transmitting. | Microphone not connected, incorrect CB settings on motorcycle, damaged microphone. | Verify microphone connection to the clamp unit. Check CB transmission settings on your Harley-Davidson. Ensure microphone is positioned correctly. |
| ຄຸນນະພາບສຽງບໍ່ດີ (ຄົງທີ່, ລະດັບສຽງຕໍ່າ). | Loose connections, interference, improperly positioned speakers, worn microphone sponge. | Secure all connections. Ensure speakers are directly over ears. Replace microphone sponge. Check for external interference sources. |
| Clamp unit feels loose. | Screws are loose, improper installation. | Re-tighten clamp screws with the Allen wrench. If using the glued adapter, ensure the surface was clean and allowed to cure properly. |
7. ຂໍ້ມູນຈໍາເພາະ
| ຄຸນສົມບັດ | ລາຍລະອຽດ |
|---|---|
| ຊື່ຕົວແບບ | SC-A0316 |
| ເຕັກໂນໂລຊີການເຊື່ອມຕໍ່ | Wired (for Harley-Davidson CB/Audio) |
| ອຸປະກອນທີ່ເຂົ້າກັນໄດ້ | Sena 20S, 20S EVO, 30K communication systems with Harley-Davidson CB/Audio |
| Jack ຫູຟັງ | 3.5 mm Jack (internal connection to Sena unit) |
| ປະເພດໄດເວີສຽງ | ໄດນາມິກໄດເວີ |
| impedance | 32 ໂອມ |
| ວັດສະດຸ | ພາດສະຕິກ |
| ນ້ໍາຫນັກລາຍການ | 0.1 ກິໂລກຣາມ (3.52 ອອນສ໌) |
| ຂະໜາດສິນຄ້າ | 3.94 x 0.79 x 3.15 ນິ້ວ |
| ສີ | ດຳ |
8. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ
Sena products are manufactured with high-quality materials and craftsmanship. This product is covered by a manufacturer's warranty. For specific warranty details and duration, please refer to the warranty information provided with your original Sena communication system or visit the official Sena webເວັບໄຊ.
ການມີອາໄຫຼ່ຂອງສະຫະພາບເອີຣົບ: Spare parts for this product are available for a duration of 2 years from the date of purchase within the EU.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Sena Customer Service through their official webເວັບໄຊ ຫຼືຜູ້ຈັດຈຳໜ່າຍທີ່ໄດ້ຮັບອະນຸຍາດ.
ຊັບພະຍາກອນອອນໄລນ໌: For the latest firmware updates, detailed user guides, and support FAQs, please visit the ເສນາ webເວັບໄຊ.
