Einhell GE-LC 36/35 Li Solo Battery Chainsaw

1. ບົດແນະນຳ

This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Einhell GE-LC 36/35 Li Solo Battery Chainsaw. Please read this manual thoroughly before using the chainsaw for the first time and keep it for future reference. This product is designed for cutting wood and similar materials.

Image 1.1: The Einhell GE-LC 36/35 Li Solo Battery Chainsaw, showing the main unit and an outline of where the batteries are inserted.

2. ຄໍາແນະນໍາຄວາມປອດໄພ

ສະເຫມີຈັດລໍາດັບຄວາມສໍາຄັນຄວາມປອດໄພໃນເວລາທີ່ປະຕິບັດການເຄື່ອງມືພະລັງງານ. ການບໍ່ປະຕິບັດຕາມຄໍາແນະນໍາເຫຼົ່ານີ້ອາດຈະເຮັດໃຫ້ເກີດການບາດເຈັບທີ່ຮ້າຍແຮງຫຼືຄວາມເສຍຫາຍຕໍ່ຊັບສິນ.

2.1 ຄວາມປອດໄພທົ່ວໄປ

• ໃສ່ອຸປະກອນປ້ອງກັນສ່ວນບຸກຄົນ (PPE): Always wear safety glasses, hearing protection, gloves, sturdy footwear, and appropriate clothing. A safety helmet with a face shield is recommended.
• ພື້ນທີ່ເຮັດວຽກ: Ensure the work area is clear of bystanders, children, and pets. Keep the area well-lit and free from obstacles.
• ສະພາບດິນຟ້າອາກາດ: ຢ່າໃຊ້ເລື່ອຍຕັດໄມ້ໃນເວລາຝົນຕົກ ຫຼື ຝົນຕົກໜັກamp conditions. Avoid operating in strong winds.
• ຄວາມປອດໄພຫມໍ້ໄຟ: Use only recommended Einhell Power X-Change batteries. Do not expose batteries to heat or fire.

2.2 ຄວາມປອດໄພສະເພາະຂອງເລື່ອຍຕັດໄມ້

• ການປ້ອງກັນການເກີດລູກ Be aware of the kickback danger zone. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
• ເບກລະບົບຕ່ອງໂສ້: Ensure the chain brake is functional before each use. It is designed to stop the chain quickly in case of kickback.
• ການ​ຈັບ​ທີ່​ເຫມາະ​ສົມ​: ຈັບສາຍໂສ້ໃຫ້ແໜ້ນດ້ວຍມືທັງສອງສະເໝີ, ດ້ວຍໂປ້ໂປ້ ແລະ ນິ້ວມືຂອງທ່ານອ້ອມມືຈັບ.
• Cutting Position: Maintain a balanced stance. Do not overreach. Cut at waist height or below if possible.

Image 2.1: The chain brake lever, which activates the kickback protection system, shown in the engaged (stop) position.

3. ຜະລິດຕະພັນເກີນview

The Einhell GE-LC 36/35 Li Solo is a powerful cordless chainsaw featuring a brushless motor for extended operation and efficiency. It is part of the Einhell Power X-Change family, requiring two 18V batteries for 36V power.

3.1 ລັກສະນະທີ່ສໍາຄັນ

• Brushless Motor: For enhanced power and longer run time.
• Kickback Protection System: Automatically shuts off the saw upon chain lock.
• Oregon Branded Quality Chain and Bar: 14-inch guide bar for reliable cutting performance.
• Tool-free Chain Tension Adjustment: For quick and easy adjustments.
• Automatic Chain Lubrication: Ensures consistent chain oiling during operation.
• Metal Grip Claws: For secure handling and stability during cuts.
• Soft Grip Handle: For comfortable operation.

ຮູບພາບທີ 3.1: ໄລຍະໃກ້ view of the 14-inch Oregon branded chain and guide bar, indicating its quality and low kickback design.

Image 3.2: Detail of the metal grip claws, providing improved stability and control during cutting operations.

4. ຕັ້ງຄ່າ

Before operating your chainsaw, ensure it is properly assembled and prepared.

4.1 ການຫຸ້ມຫໍ່

Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts list in your product documentation for a complete inventory.

4.2 ການຕິດຕັ້ງຫມໍ້ໄຟ

The GE-LC 36/35 Li Solo requires two 18V Einhell Power X-Change batteries (not included). Ensure batteries are fully charged before use.

1. Locate the battery compartments on the chainsaw.
2. Slide each charged battery into its respective compartment until it clicks securely into place.
3. To remove, press the release button on the battery and pull it out.

Image 4.1: Hands demonstrating the correct method for inserting a Power X-Change battery into the chainsaw's battery slot.

Image 4.2: A graphic clearly stating that the battery and charger are not included with the 'Solo' version of the product.

4.3 Chain and Bar Assembly & Tensioning

The chainsaw features tool-free chain tension adjustment.

1. ໃຫ້ແນ່ໃຈວ່າເບຣກຕ່ອງໂສ້ຖືກຕັດອອກ.
2. Loosen the side cover knob by turning it counter-clockwise.
3. ວາງຕ່ອງໂສ້ປະມານ sprocket ແລະແຖບຄູ່ມື, ຮັບປະກັນການຕັດແຂບປະເຊີນກັບທິດທາງທີ່ຖືກຕ້ອງ.
4. Fit the guide bar and chain onto the chainsaw body, aligning the bar studs.
5. Tighten the side cover knob slightly.
6. Adjust chain tension by turning the tensioning wheel (usually located near the side cover knob) until the chain is snug against the guide bar but can still be pulled freely by hand. There should be no more than 2-3mm of sag in the middle of the bar.
7. Fully tighten the side cover knob.

Image 4.3: A visual representation of the tool-free chain tensioning mechanism, highlighting the ease of adjustment without additional tools.

4.4 Chain Oil Filling

The chainsaw has an automatic chain lubrication system, but the oil reservoir must be filled before use.

1. ວາງ chainsaw ເທິງຫນ້າລະດັບ.
2. Unscrew the oil tank cap (refer to Image 4.4).
3. ຕື່ມໃສ່ອ່າງເກັບນ້ໍາດ້ວຍລະບົບຕ່ອງໂສ້ທີ່ມີຄຸນນະພາບສູງແລະນ້ໍາມັນບາ. ຢ່າໃຊ້ນໍ້າມັນເສຍ ຫຼືນໍ້າມັນເຄື່ອງ.
4. ປ່ຽນໝວກຢ່າງປອດໄພ.

Image 4.4: Close-up of the oil tank cap, indicating its location for refilling the automatic chain lubrication system.

5. ຄໍາແນະນໍາການດໍາເນີນງານ

ປະຕິບັດຕາມຂັ້ນຕອນເຫຼົ່ານີ້ເພື່ອການໃຊ້ງານເລື່ອຍຕັດໄມ້ຂອງທ່ານຢ່າງປອດໄພ ແລະ ມີປະສິດທິພາບ.

5.1 ການເລີ່ມຕົ້ນ ແລະຢຸດ

1. Ensure batteries are installed and chain oil reservoir is full.
2. ປົດເບຣກໂສ້ອອກໂດຍການດຶງຄັນໂຍກກັບຄືນໄປຫາມືຈັບດ້ານໜ້າ.
3. Press the safety lock-off button (if present) and then squeeze the trigger switch to start the chainsaw.
4. To stop, release the trigger switch. Engage the chain brake immediately after stopping the cut or when moving between cuts.

5.2 ເຕັກນິກການຕັດ

• ການ​ວາງ​ແຜນ​ການ​ຕັດ​: Before cutting, assess the wood for stability, potential kickback, and pinch points.
• ການ​ຕັດ​: Allow the chain to reach full speed before contacting the wood. Apply light pressure and let the saw do the work.
• Felling Small Trees: For felling, make a directional notch on the side of the desired fall, then make the felling cut from the opposite side, slightly above the notch.
• ແຂນຂາ: Work from the bottom up, supporting the branch to prevent pinching.

Image 5.1: A user demonstrating safe operation of the chainsaw, wearing appropriate PPE and cutting a log on a sawhorse.

6. ບໍາລຸງຮັກສາ

ການບຳລຸງຮັກສາເປັນປະຈຳຮັບປະກັນປະສິດທິພາບທີ່ດີທີ່ສຸດ ແລະ ຍືດອາຍຸການໃຊ້ງານຂອງເລື່ອຍຕັດໄມ້ຂອງທ່ານ.

6.1 ການປັບຄວາມເຄັ່ງຕຶງຂອງຕ່ອງໂສ້

Check chain tension frequently, especially during initial use. A loose chain can derail, and a tight chain can cause excessive wear. Adjust as described in Section 4.3.

Image 6.1: Close-up of the chain tension adjustment knob, illustrating the mechanism for tool-free chain tensioning.

6.2 ການຫລໍ່ລື່ນຕ່ອງໂສ້

The chainsaw features automatic chain lubrication. Regularly check the oil level in the reservoir and refill as needed (refer to Section 4.4). Ensure the oil port is clear of debris.

Image 6.2: A visual representation of the automatic chain lubrication system, showing oil being dispensed onto the chain during operation.

6.3 ການທໍາຄວາມສະອາດແລະການເກັບຮັກສາ

• After each use, remove batteries and clean the chainsaw thoroughly. Remove sawdust and debris from the guide bar, chain, and motor housing.
• ເກັບຮັກສາ chainsaw ຢູ່ໃນສະຖານທີ່ແຫ້ງ, ປອດໄພ, ອອກຈາກເດັກນ້ອຍ.
• Always use the guide bar cover when storing or transporting the chainsaw.

7. ການແກ້ໄຂບັນຫາ

ພາກສ່ວນນີ້ແກ້ໄຂບັນຫາທົ່ວໄປທີ່ທ່ານອາດຈະພົບ.

If problems persist, contact Einhell customer support or a qualified service technician.

8. ຂໍ້ມູນຈໍາເພາະ

Image 8.1: A graphic illustrating the chain speed of 15 meters per second, indicating efficient cutting performance.

9. ການຮັບປະກັນແລະການສະຫນັບສະຫນູນ

ສຳລັບຂໍ້ມູນການຮັບປະກັນ, ການລົງທະບຽນຜະລິດຕະພັນ, ຫຼື ການຊ່ວຍເຫຼືອດ້ານເຕັກນິກ, ກະລຸນາອ້າງອີງເຖິງ Einhell ຢ່າງເປັນທາງການ webເວັບໄຊ ຫຼືຕິດຕໍ່ພະແນກບໍລິການລູກຄ້າຂອງເຂົາເຈົ້າ. ຮັກສາໃບຮັບເງິນການຊື້ຂອງທ່ານໄວ້ເປັນຫຼັກຖານການຊື້.

ສໍາລັບການຊ່ວຍເຫຼືອເພີ່ມເຕີມ, ໄປຢ້ຽມຢາມ Einhell official webເວັບໄຊ.